Tehnička specifikacija - 7mm strong wood - ball corners - handles for transport - rubber feets - Screws included - butterfly latches (DDR4 bis DDR10)

4-channel power audio amplifier for Rack ArtSound PRL-1204 is a 4-channel power amplifier, class D. The amp is extremely compact and can produce 4 x 120W RMS on 8 Ohms or 4 x 200W on 4 Ohms. Connected to a preamplifier like the ArtSound PM-2S01 it allows you to drive a large power on four different channels. ArtSound PR-1204 is equipped with both comfortable feet for surface mounting and a panel for mounting on a vertical rack. Specs: Type : 4-channel 4 x 120W RMS 8Ohm (200W / 4Ohm) final amplifier, class D Description : 4mm aluminum front panel - metal chassis Other : Protection, clip for Rack, LED Inputs : XLR audio combo jacks inputs / outputs- Loudspeaker binding posts Selection : stereo / parallel / bridge switch Dissipation : Innovative heatsink with air flow Input Sensitivity : 0.775V-1.0V-1.44V Signal / Noise : ?95dB Frequency response : 20Hz - 20KHz THD (10% Rated Power) : <0.1% Other : Class D Power Amplifier CircuitT.HD: <0.1% Power supply : 220V / 50Hz Dimensions (mm) : 483 x 250 x 44mm (19 ” / 1U) Weight : 3.8Kgs

Čisti kondenzatorski mikrofon. Optimalnog senzibiliteta i čistih soničnih karakteristika. Frekvencijska osjetljivost: 20-20,000 Hz - jednostruka kondenzatorska kapsula velikog promjera - karakteristika usmjerenosti: kardioidna - frekvencijski opseg: 20Hz - 20kHz - osjetljivost mikrofona: -32dB/1V @ 1Pa - nominalna impedansa: 100 Ω - maksimalni nivo zvučnog pritiska: 145dB (na 1kHz sa 1% ukupnih nelinearnih izobličenja), odnosno 155dB sa aktivnim atenuatorom od -10dB - sopstveni šum mikrofona: 12dB - dinamički opseg: 133dB (na 1kHz pri maksimalnom nivou zvučnog pritiska) - napajanje: 48V 3mA (ne isporučuje se uz mikrofon) - prekidači: odsjecanje basova na 80Hz (12dB po oktavi) + atenuacija -10dB - dimenzije: 170mm (dužina) / 53,4mm (maksimalan promjer) - masa: 360g

The ADJ UV COB Cannon produces a large ultraviolet wash from high output, advanced COB (Chip On Board) UV LEDs–COB LED technology allowing for a powerful LED engine to be placed in a small amount of space. This professional lighting fixture is designed for washing performance stages, theatrical productions and special effects productions. It requires very little maintenance or service due to its sold state electronics. The UV COB Cannon has 3 operational modes (sound active, manual or DMX), has 3 DMX operational modes, 5 selectable dim curves, a 4-Button DMX Display and is flicker free for film and television. This fixture is DMX linkable via 3-pin DMX, and is power linkable via PowerCon connections. The light source is a 100-Watt COB (Chip On Board) UV LED engine. Specification: Super high output UV light cannon Great for performance stages, theatrical productions and special effects productions – requires almost no maintenance – low heat, low power consumption Advanced COB Technology (Chip On Board) produces powerful, smooth UV color 3 Operation modes: Sound Active, Manual, & DMX 3 DMX Channel modes: 1, 2 or 3 channel 4-button digital DMX display Flicker Free operation (No flickering on camera) 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre) LED pulse and strobe effect Electronic Dimming: 0 100% Beam angle: 33 degrees Dual yoke allows fixture to be hung or set on the ground DMX Linkable: 3-pin XLR data connectors Power Linkable: PowerCon connectors (Up to 3 UV COB Cannon’s @ 120V, 5 UV COB Cannon’s @ 220V fixtures) Long Life LEDs Rated at approximately 25,000 hrs.) Power Draw: 120W total (All LED's @ Full) Light Source: 100W COB (Chip On Board) UV LED engine Multi-voltage Operation: Auto switching, AC 100V 240V/50Hz -60Hz Dimensions (LxWxH): 12.75” x 11” x 8”/ 320 x 278 x 200mm Weight: 11 lbs. / 4.98kgs Specifications subject to change without notice

DESCRIPTION The most popular tower in the Classic Series, the XLS-28 offers three-way performance in stylish enclosure. Featuring Dual 8", cast frame high excursion woofer, the XLS includes a 6.5-inch mid-range speaker and a 1-inch soft dome tweeter coupled to a proprietary mid and high frequency waveguide. Specifications 1" Soft Dome Tweeter with Ferro Fluid 6.5" Woofer with Fiber Impregnated Cone Dual 8" Cast Frame High Excursion Woofer Proprietary Mid and High Frequency Waveguide Fuse Protection Elegant Black-Ash Enclosure Performance Data: Frequency Response 45 Hz - 20 kHz (-3 dB) 38 Hz - 20 kHz (-10 dB) Power Capacity: 200 watts (Peak ) Sensitivity in SPL: 89.8 dB (@ 8 ohms @ 1 meter full) Impedance: 6 ohms Crossover Frequencies: 380 Hz / 2.4 kHz

Eight channel ADAT to analog converter Ideal for surround outputs to speakers from DAW interfaces: 44.1k and 48k operation Independent output level trim adjustments Plug and play operation Plug & Play D to A Model 141B is a plug & play, eight-channel ADAT to analog converter with balanced outputs, each with its own output level trim. It can accept ADAT signals at either 44.1kHz or 48kHz sampling rates. Rackmount Kit for 120B, 124B and 141B Allows for the rack mounting of one or two "B" series products in one rack space. The new front panel design of the "B" series products and the new rack mount kit design makes installation 100% faster! Specs: Max Input: 0 dB FS Max Output: +24dBu THD+Noise: -100dB Dynamic Range: 114dB Trim Range: 12 dB Jitter: X Power Consumption: 10 Watts Frequency Response: 20 Hz - 20 kHz +/-0.5 dB Size: 1 RU, 1/2 Rack Width 1.75"H x 8.5" W x 7.25" D Weight: 3.5 lbs Connectors: Toslink, DB25 TASCAM format

Stereo DI Phantom power supply Multiple inputs: Jacks 1/4", RCAs Adjustable sensitivity: 0,-12dB,-24dB Low impedance outputs LINE OUT - phase switch selector GND ground switch selector: Lift/RC/Gnd features two 1/4” jack inputs with parallel monitor outputs as well as RCA inputs The JK2 has two completely separate channels and can be used with two different instruments or stereo instruments The JK2 features a variable Pad, Phase Shift and ground lift The on-board Line Driver ensures the highest signal integrity and the smallest loss of signal through long cable lengths

Powerful Studio Quality Sound, Anywhere You Go. While there are hundreds of portable Bluetooth speakers on the market, none of them were developed with musicians in mind – until now. Meet iLoud – the first portable speaker for musicians. We’ve created a portable Bluetooth speaker that combines superior power with spectacular audio resolution and amazing bass response. And IK Multimedia's with over 16 years of pro-audio engineering expertise — plus our position as the leading developer of mobile music-creation apps and accessories — we know what we’re doing. For the first time ever there's now a portable Bluetooth speaker that offers you the full power, clear sound, deep bass and stereo image of your studio monitors. No matter whether you're mixing your next masterpiece, practicing on the go or just listening at home, iLoud provides an unparalleled high-quality music experience. Big sound, small footprint As its name implies, iLoud is much louder than your average portable Bluetooth speaker. With a full 40 Watts of sonic power, iLoud sounds 2-3 times louder than comparable-sized speakers. It provides a richer, more powerful sound for any type of music style from rock to hip-hop to electronic music and beyond. It allows you to reproduce your music – in every possible mobile situation – as accurately as you would in the comfort of your studio. Years of pro-audio experience and innovative engineering solutions have contributed to our ability to produce a speaker this powerful in such a small enclosure. The sound quality and fidelity of iLoud will absolutely blow you away. Loud and clear Though the first thing you'll notice about iLoud is its namesake volume, the second thing you'll notice is how clear it sounds. Its high-fidelity studio-style sound is far beyond what you can get from conventional portable Bluetooth speakers. Thanks to its time-aligned 2-way system, precision custom neodymium loudspeakers, tuned bass-reflex, non-resonant enclosure and DSP processing, iLoud offers an ultra-accurate frequency response, exceptional bass response and stereo imaging that cannot be found in any other portable Bluetooth speaker. With iLoud you can be confident that any type of music will be reproduced with the accuracy normally found only on high-grade studio monitors. Even highly demanding sound textures like you find in classical, jazz and acoustic music will come to life with a precision and musicality that you've never heard before from a speaker of this size. Plug and play Here’s where it gets interesting. Grab your guitar and plug it into iLoud, plug in your mobile device, launch your favorite mobile app like AmpliTube or VocaLive and start jamming and recording. iLoud features a built-in iRig circuit for directly connecting a guitar or a dynamic microphone which lets you take advantage of the real time sound processing of your favorite mobile apps. Ultra portability iLoud might offer the big sound and fidelity of a high-end system but its small enclosure ensures that it can be easily carried anywhere in a laptop bag or backpack. It has the overall dimensions of an iPad, is only 6 cm (2.3”) deep and features a tilted shape for optimal listening on a desktop. Thanks to its long-lasting battery, iLoud is the ideal speaker to be carried around by mobile musicians whether they're composing, recording or they simply want to listen to high-quality music anytime and everywhere. Features 40 Watts total musical power — twice as much as speakers of comparable size Superior bass response and sound accuracy Bluetooth and stereo analog line input Battery powered with 10 hours normal usage and auto standby iRig® input for guitars and dynamic mics for iPhone/iPad processing Highly portable — it easily fits in a laptop bag or backpack Ideal for music reproduction and music creation Specs iLoud Specifications 40W total power (2x16W low-frequency, 2x4W high frequency). Frequency response 50Hz to 20kHz. Four Class-D Amplifiers, bi-amped system. Two way 2x3” neodymium woofers & 2x3/4” neodymium tweeters. High performance bass-reflex port. 1/4” iRig® input for connecting guitars and dynamic microphones to iOS devices. Bluetooth compatible with A2DP protocol. 1/8” stereo analog line input. DSP controlled. Superior low-frequency extension and sound accuracy. Auto Standby. Integrated high-performance Li-Ion rechargeable battery. Battery duration at maximum volume: up to three hours. Normal usage: up to ten hours. Package includes iLoud speaker Power supply Power supply cable TRRS audio cable (1m/3.3ft) Quick start guide Registration card Dimensions Size: 250mm/9.84" x 160mm/6.3" x 60mm/2.36" (W x H x D) Weight: 1,330g/46.91oz

Although we refer to it as a “column” loudspeaker, the INSPIRE iP300 delivers the powerful, high-quality sound and optimised dispersion inspired by our award-winning line array products – in a surprisingly lightweight and easy to use, all-in-one form factor. Thanks to an on-board 3-channel digital mixer and multichannel 600-Watt Class-D amplifier driving 2 x 6.5" high excursion low frequency drivers and 4 x 2" neodymium drivers, the iP300 is ideally-suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs, and much more. Weighing in at a very modest 11.9 kg (26.2 lbs), the iP300 is easy to transport and features industry-leading KLARK TEKNIK Spatial Sound Technology, Reverb, and Class-D multichannel amplifier – plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control. Column loudspeaker for portable PA applications and high quality music playback KLARK TEKNIK's revolutionary SST (Spatial Sound Technology) for creating 3D acoustic environments Extremely wide sound dispersion provides consistent sound to the audience and performers 600 Watt power, multi-channel KLARK TEKNIK Class-D technology 3 channel digital mixer with gain setting recall High-quality KLARK TEKNIK digital reverb for amazing vocal enhancement Comprehensive remote control via Apple iPhone/iPad* High quality Bluetooth* stereo audio streaming DSP presets for application type and speaker positioning Intuitive single rotary control user interface with LCD display for ease of navigation Dual 6.5" high excursion low frequency driver for low distortion sub-bass response 4 x 2” neodymium drivers with edge wound aluminium voice coils for extended high frequency reproduction Multiple height configurations for floor or elevated use High impact and lightweight enclosure Integrated protective perforated steel mesh grilles Integral ergonomic carrying handle for ease of portability Designed and engineered in the U.K.

Opis MBA F-15A karaoke zvučnik sa akumulatorom snage 150W. Čist i kvalitetan zvuk , veoma jaka izlazna snaga. Radi na 220v ili na akumulator od 12v. Poseduje slot za memorijsku karticu, ulaz za usb flash memoriju, radio Sadrži ulaz za gitaru i za jos zvučnika. Može da služi i kao pojačalo za gitaru ili bas. Zvučnik ima ugradjene točkice kao i ručicu na izvlačenje radi lakšeg prenosa. Akumulator moze da izrži 10-12h bez punjenja. POSEDUJE LED SVETLA RAZNIH BOJA Komplet sadrži: – Punjivi karaoke zvučnik – Dva bežični mikrofona- – Strujni kabal za punjenje – Daljinski upravljač – Kabal za kompjuter – Kontrola za podesavanje zvuka zvučnika i jačina zvuka mikrofona, echo efekat, equalizer… – FM tjuner – RADIO– Samostalan rad bez povezivanja sa računarom preko SD / MMC / MMS kartice ili USB Flash drive. – Ulaz od eksternog uređaja. – Svetlosna indikacija – prilikom punjenja i indikacija napunjene baterije. – Pogodan za izlete i mesta gde nema struje. Visina 72cm Širina 50cm Bočne strane 40cm

LISTEN TO YOUR MUSIC, NOT TO YOUR HEADPHONES PROFESSIONAL CLOSED-BACK CIRCUM-AURAL HEADPHONES Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips. The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand new driver membrane was developed. The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones. Specs: Closed Circumaural Conversion technology for acoustic transparency and dynamics Impedance: 32 Ohms Sensitivity (@ 1 kHz - / 1 Vrms): 122 dB SPL THD (THD, @ 1 kHz / 100 dB SPL): 0.3% Frequency range: 5 Hz to 22 kHz Connection: 3.5 mm jack with 4 contacts Dimensions: 239 x 212 x 111 mm Weight: 280 g Includes spiral cable (5 m) and straight cable (1.4 m) Design Over-Ear System Closed Back Impedance 32 Ohms Frequency range 5 Hz – 22000 Hz Adapter Yes Replaceable Cable Yes

MADI devices are widely used in a broad range of pro audio applications including permanent installation, touring sound, live/studio recording, and broadcasting. The DN32-MADI expansion card enables your MIDAS M32 or BEHRINGER X32 digital console to exchange 24-bit multichannel audio streams at 44.1 or 48 kHz with any other MADI compatible devices. Protocols supported by the DN32-MADI include AES10-1991 with up to 56 x 56 channels, and AES10-2003 with up to 64 x 64 channels. Connectivity and Redundancy DN32-MADI features optical duplex SC-plugs (IEC874-19) to connect with MADI devices using multimode optical-fibre cable. KLARK TEKNIK has tested multimode cable connections of 500 metres in length successfully, and distances of up to 2 km may be possible. Dual BNC connectors are also provided for transmission on standard 75-Ohm coaxial cables up to 100 metres in length. When both the optical and coaxial interfaces are utilised, the coaxial I/O serves as a redundant connection, and is automatically activated should the optical connection become unavailable. Clock Synchronisation and Routing Both the BNC coaxial and optical-fibre inputs can also function as the word clock source for your mixing console. Alternately, the coaxial and optical outputs can transmit the console’s internal word clock to external devices. The DN32-MADI card’s input stream can accommodate up to 64 channels, 32 of which can be used inside your console. Likewise, 32 of these internal signals can be transmitted on the MADI output stream, replacing those of the corresponding input channels. This also means the MADI output channels not allocated to the console signals simply pass their corresponding input channels through. This convenient feature allows two consoles to be easily combined via their DN32-MADI cards to provide a total of 64 channels for live sound or recording. Features: MADI (AES10-compliant) expansion module for Midas and Behringer digital consoles Up to 32 bidirectional channels @ 48 kHz sample rate Operates up to 500 m over optical fibre link and 100 m over coaxial copper link Optical transmission on SC-Duplex* connector Copper transmission on 75 ohm coaxial BNC connectors Dual-redundant operation with failover from optical to copper connections Operates as either MADI clock master or MADI clock slave Selection of 32 input and output channels (1-32, 33-64) from 64 MADI channels 10-Year Warranty Program* Designed and engineered in the U.K.

The ATH-E50 features specially designed housings that provide excellent isolation, ensuring confident, comfortable stage performance. To address the evolution of modern music production, this model also excels at providing a consistent reference in every sonic environment, making it the ideal choice for the producer on the road. The sound isolation and comfort offered by the ATH-E50 are enhanced by the four sizes of included silicone eartips (XS/S/M/L), which allow you to create a custom fit. The ATH-E50 also comes with a detachable 1.6 m (5. 2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5 mm (1/8") stereo mini-plug output, and a carrying case. Powerful single balanced armature drivers provide an accurate full-range response Flexible memory cable loops over ears for a custom fit and long-wearing comfort Specially designed housings provide maximum isolation, allowing you to focus on the music Detachable 1.6 m (5.2') cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones, offers exceptional durability and optimized audio performance Includes a carrying case, 6.3 mm (1/4") adapter, and silicone eartips (XS/S/M/L)

Klasični shotgun mikrofon superkardeoidne usmerene karakteristike, namenjen specifičnim visokozahtevnim aplikacijama u broadcast, televizijskoj i filmskoj industriji, kao i u profesionalnim radijskim aplikacijama i Napomenaištu. Kondenzatorska kapsula ovog mikrofona, zajedno sa vrhunskom SMT elektronikom osigurava kontrolisan dijagram usmerenosti s visokim stepenom suzbijanja neželjenih ambijentalnih šumova. Pored velikog frekventnog opsega i visoke dinamike, ovaj mikrofon može raditi na 48V fantomskom napajanju ili se može napajati standardnom AA 1,5V alkalnom baterijom, što ga čini upotrebljivim i u terenskim uslovima. Zahvaljujući odličnim tonskim karakteristikama i dobroj ceni, sve je češće deo opreme TV stanica. U kompletu sa mikrofonom dolazi RM5 nosač mikrofona, WSVM zaštitnik od vetra i ZP1 torba za transport. Tehnička specifikacija: * Acoustic Principle: Line Gradient * Active Electronics: JFET impedance converter with bipolar output buffer * Capsule: 0.50" * Polar Pattern: SuperCardeoid * Address Type: End * Frequency Range: 20Hz - 20kHz * Output Impedance: 250Ω * Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load) * Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1KΩ load) * Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz * Equivalent Noise Level (A-weighted): 18dB-A * Power Options: +48V phantom power; AA Battery * Weight: 161.00gm * Dimensions: 280.00mmH x 22.00mmW x 22.00mmD * Output: XLR Output

The RØDE VideoMic Pro+ is a new addition to the best-in-market on-camera category. It is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. Still with the best-in-class Rycote Lyre suspension system onboard, the VideoMic Pro+ improves on the existing VideoMic Pro capsule/line tube and windshield, plus boasts a host of new features. Automatic Power Function (with plug-in power availability) is perfect for the run-and-gun shooter, automatically turning the microphone off when unplugged from the camera. Built-in Battery Door makes replacing the battery a breeze - plus it won't get lost. Power options- the VideoMic Pro+ can be powered by the all-new and included RØDE LB-1 Lithium-Ion Rechargeable Battery, 2 x AA Batteries or continuously via Micro USB. Digital Switching - will ensure the user has ultimate capture of the audio signal at the source, reducing post-production and editing times. The Digital Switching includes: 2-Stage High Pass Filter to reduce low frequencies such as rumble from traffic or air conditioning 3-Stage Gain Control, with +20dB function – designed to improve audio quality on DSLR or mirrorless cameras High-Frequency Boost will boost high frequencies enhancing detail and clarity in the recording Safety Channel to help ensure the signal does not clip when unexpected spikes occur Features Automatic Power Function with plug-in power Power via LB-1, 2 x AA Batteries, Micro USB Ships with LB-1 Lithium-Ion Rechargeable Battery, Detachable 3.5mm TRS Cable, Micro USB Cable Built-in Battery Door Optimized Windshield Shape LED indicator for power source and charging / discharging status USB micro port for charging removable LB-1 Bery Digital Switching Audio Level adjustment Dual high pass filter options High-frequency boost Dual mono unbalanced output Safety channel option on right channel Ambient light detect to boost LED brightness Low noise circuitry Improved RF immunity Rycote® Lyre® shock mounting onboard Specifications Acoustic Principle: Line Gradient Directional Pattern: Supercardioid Frequency Range: 20Hz ~ 20kHz (selected HPF @ 75Hz/ 150Hz) Sensitivity: -33.6dB re 1V/Pascal (21.20mV @ 94dB SPL) ±2dB @ 1kHz Output Impedance: 200Ω Equivalent Noise: 14dBA Maximum Output Level: 7.7dBu (@ 1kHz, 1% THD into 1kΩ) Dynamic Range: 118.8dB Maximum SPL: 133dBSPL Signal to Noise Ratio: 79.8dB Power Options: RØDE LB-1 Lithium-Ion Rechargeable Battery (~12mA current draw), 2 x AA Batteries (~17mA current draw), or via Micro USB Port LB-1 Battery Life: Over 100 hours of continuous use Battery Charger: Micro USB Cable (supplied) Output Connection: Dual mono unbalanced on the stereo 3.5mm jack Dimensions: 111mmH x 66mmW x 170mmD Net Weight: 122g

The VideoMic Pro with Rycote Lyre Suspension Mount from Rode is a supercardeoid condenser shotgun microphone that terminates in a 1/8" stereo mini-jack (dual mono), includes an integrated shockmount, and an integrated foam windscreen. It can be used to capture audio for camcorders, DSLR, and portable recorders as a source of primary and reference audio. The VideoMic Pro has been upgraded from earlier models with a 1/2" condenser capsule that provides broadcast-quality audio. Its 1/8" stereo mini-jack connector (outputting the mono signal to both left and right channels) delivers low self-noise of just 14 dB. A supercardeoid polar pattern ensures that surrounding audio is minimized, and your recording is focused on the subject in front of the camera. In addition, the Rycote Lyre-based shockmount is built from a single piece of hard-wearing thermoplastic. It separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. This suspension will never wear out, sag or snap. Easily accessible on the rear face of the microphone are the power, the filter, the level controls and a selectable high-pass filter at 80 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being recorded. Furthermore, the -10 dB (or pad) is suitable when recording loud sound sources such as live music, motorsports, or interviews, where the subject is very close to the camera. There is a +20 dB level boost designed for use with DSLR cameras, so the user can reduce the camera's preamp level, effectively reducing the amount of noise generated by the camera's audio circuitry. The Rode VideoMic Pro uses a standard sized shoe-mount for on-camera use and features a 3/8" thread in the base of the mount for easy boom-pole mounting. The VideoMic Pro is battery powered and provides over 70-hours recording from a single 9V battery. 9V battery powered with over 70 hours use (alkaline) Camera shoe mount with 3/8" thread for easy boom-pole mounting Compact form factor is only 6.7" length

Recording Set Includes AI-1 audio interface, NT1 microphone, SMR spider, XLR microphone cable and Ableton Live Lite software Features AI-1 audio interface: USB 2.0 audio interface 24-bit / 96 kHz Gain control with signal LED Switchable direct monitoring of the recording signal Switchable phantom power +48 V 1x microphone / instrument combo input XLR / 6.3 mm jack 2x line output 6.3 mm jack balanced Stereo headphone jack 6.3 mm jack USB-C Power supply via USB Dimensions: 124 x 100 x 38 mm Weight: 560 g Including USB C / A cable Features NT1 large diaphragm condenser microphone: Gold-plated 1" capsule, stored in miniature Lyre of Rycote Black metal housing with scratch-resistant ceramic coating Extremely low self-noise (4.5 dBA) Directivity: Kidney Transmission range: 20 - 20000 Hz Output impedance: 100 ohms Sensitivity: 35.0 mV / Pa Replacement noise level: 4.5 dBA (according to IEC651), Max Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load) Dynamic range: 128 dB Boundary sound pressure level: 132 dB Signal-to-noise ratio: 90 dBA (according to IEC651) Requires phantom power 24 V / 48 V. Connection: 3-pin XLR Dimensions: 50 mm x 190 mm (diameter x length) Weight: 395 g Includes special spider SMR with double lyre by Rycote, pluggable metal pop protection and dust bag Made in Australia 10-year guarantee for registered users (special guarantee between manufacturer and buyer)

The collaborative partner for the solo artist. When you’re a solo artist, you have to be more than just creative to realize your vision—you must also be a producer and an audio engineer. The ioStation 24c audio interface and production controller provides the tools needed for all of these diverse roles in a compact, ergonomic desktop design that will fit into any home studio. Record your audio through two pristine XMAX mic preamps and high-definition 24-bit, 192 kHz analog-to-digital converters. Navigate your recordings with easy-to-use transport controls. Edit your production and automate parameters in your favorite DAW with the powerful Session Navigator and mix it all with a 100 mm touch-sensitive motorized fader. Whether you’re a musician producing your latest album or just getting started with your first podcast, the ioStation 24c gives you all the tools you need to record and mix with the ease of hands-on, tactile control—all in a single device that doesn’t clutter your creative space. Superior front-end for superior results. Audiophile-grade digital converters and transparent preamps create a superior recording and listening experience. The ioStation 24c audio interface features two of PreSonus®’ acclaimed XMAX Class A analog microphone preamps that deliver incredibly high headroom, deep lows, shared smooth highs, and a rich overall sound—you’ll hear every breath, transient, and detail in your recordings. High-quality converters provide 115 dB of dynamic range to capture complex musical harmonics smoothly and naturally. The result is clear, consistent audio that makes mixing easier and creating a polished sound faster. Work smarter. We've incorporated elements from the award-winning FaderPort®-series controllers into the ioStation 24c. Rather than forcing you to reinvent your mixing method, the ioStation 24 augments the way you currently mix. You will still use your faithful keyboard and mouse for things they do well, while the ioStation 24c handles what you really want to get your fingers on: your mix. This is DAW control the way you always hoped it could be! Streamlined workflow and support for the Mackie Control and HUI protocols make it fast and easy to control Pro Tools, Logic Pro X, Cubase, Ableton Live, and more. No driver installation is necessary; just plug in your ioStation 24c and take command of your mix. Deep integration with the included PreSonus Studio One® Artist will let you mix at lightning speed. World-class recording software included. Seamlessly integrated with the included PreSonus Studio One Artist music production software, the ioStation 24c audio interface works with virtually all macOS® and Windows®x recording software. Easy to learn, Studio One enables you to compose, record, and produce without getting distracted by the tools or hemmed in by track limitations. Need a new loop or sample for your latest production? Studio One lets you shop, audition, and purchase new content and upgrades without even opening your browser—you’ll build the version of Studio One that’s right for you. By combining a flexible single-window user interface with a modern, beat-based production workflow, Studio One’s drag-and-drop approach doesn’t dictate how you work or what you work on; you do. Your studio assistant. The ioStation 24c’s unique Session Navigator is your caffeine-fueled assistant engineer, providing easy access to eight mission-critical functions for maximum flexibility. Use the large encoder button and companion buttons to edit and mix with greater efficiency and speed. Scroll through your timeline using the encoder or work measure-by-measure with the arrow buttons; zoom in and out on the timeline with the encoder and make your tracks larger or smaller with the arrow buttons; navigate and drop markers; and maintain constant control of your main level. Once you start using the Session Navigator, you’ll wonder how you mixed without it. One is the happiest number. Whether you're just getting into audio production or looking to streamline your recording rig, the ioStation 24c audio interface and production controller will give you clear, clean, ultra-high-def sound with professional mixing tools in a compact, space-saving design. While it’s a perfect companion for any recording software, the ioStation 24c and included Studio One Artist provide you with a complete, affordable recording solution that will make you sound great. Includes Studio Magic Plug-in Suite. This suite of plug-ins adds a wealth of fresh virtual instruments and effects to Studio One. Cherry-picked from the first names in virtual instruments and effects, each plug-in brings a different flavor of practical magic to your songs. These plug-ins aren't gimmicky one-trick ponies — these are real-deal workhorses that you'll rely on for countless mixes. Features Features: General Features Two products in one: audio interface and production controller Record through two high-quality XMAX mic preamps Control your favorite DAW with a touch-sensitive motorized fader and intuitive navigation controls Compact, ergonomic design fits into any studio, whether in your bedroom or your backpack Recording Features USB-C™ compatible (USB 2.0), 24-bit/192 kHz audio interface 2 mic/instrument/line inputs with XMAX mic preamps 2 balanced ¼” TRS main outputs Simultaneous I/O up to 2 inputs and 2 outputs Mixer knob for low-latency direct input monitoring 1 ¼” headphone output with independent level control USB 2.0 connectivity, macOS/Windows compatible Production Features Single touch-sensitive, 100 mm long-throw, motorized fader Large, 360° button encoder Complete recording-transport controls: Play, Stop, Fast Forward, Rewind, Record, Loop Drop Marker, Next/Prev Marker, Next/Prev Event General session controls: Undo/Redo, Arm All, Solo/Mute Clear, Click On/Off Session Navigator provides quick control over Track Scrolling, Timeline Scrolling, and much more Channel Controls: Level, Pan, Solo, Mute, Rec Arm Automation Controls: Touch, Latch, Trim, Write, Read, Off Native Studio One support with tightly integrated control Dedicated MCU modes for Logic, Live, and Cubase / Nuendo Customized HUI implementation for Pro Tools Footswitch input for hands-free start/stop (footswitch not included) Included Software Studio One Artist recording and production software Over 6GB of additional loops and sample content ​Studio Magic Plug-in Suite Computer system requirements: Mac macOS® 10.11 or higher (64-bit only) Intel® i-series 2 GHz multicore processor (or AMD equivalent) or faster 4 GB RAM (8 GB or more recommended) Windows Windows® 7 x64 SP1 + platform update, Windows 8.1 x64, Windows 10 x64 Intel i-series 2 GHz multicore processor (or AMD equivalent) or faster 4 GB RAM (8 GB or more recommended) Mac and Windows Systems USB-C™ or USB-A 2.0 port compatibility 32 GB hard disk space PreSonus Universal Control 2.0 or higher Monitor with 1366x768 resolution (high-dpi monitor recommended) Multitouch-enabled monitor required for touch operation Specifications: Microphone Preamp Type: XLR Female (via Combo), Balanced Maximum Input Level: +16 dBu (Balanced, min. gain) Gain Control Range: 80 dB Frequency Response: 20 Hz to 20 kHz (±0.15 dB, unity gain, 48 kHz) Dynamic Range: > 107 dB (A-wtd, min. gain) Total Harmonic Distortion: < 0.007% (1 kHz, min. gain) EIN: < -128 dBu (max gain, 40Ω, 22 kHz BW, A-wtd) Input Impedance: 1.6 kΩ Phantom Power: +48V, > 8 mA per input Instrument Inputs Type: ¼” TS Female (via Combo), Unbalanced Maximum Input Level: +15 dBu (Unbalanced, min. gain) Gain Control Range: 80 dB Frequency Response: 20 Hz to 20 kHz (±0.2 dB, unity gain, 48 kHz) Dynamic Range: >110 dB (A-wtd, min. gain) Total Harmonic Distortion: < 0.012% (1kHz, -1 dBFS, min. gain) Input Impedance: > 1 MΩ Line Inputs Type: ¼” TRS Female (via Combo), Balanced Maximum Input Level: + 22 dBu (Balanced, min. gain) Frequency Response: 20 Hz to 20 kHz (±0.05 dB, unity gain, 48 kHz) Dynamic Range: > 114 dB (A-wtd, min. gain) Total Harmonic Distortion: < 0.007% (1 kHz, -1 dBFS, min. gain) Input Impedance: 10 kΩ Main and Line Outputs Type: ¼” TRS Female, impedance balanced Maximum Output Level: +18 dBu (Balanced) Frequency Response: 20 Hz to 20 kHz (±0.2 dB, unity gain, 48 kHz) Dynamic Range: > 109 dB (A-wtd) Total Harmonic Distortion: < 0.005% (1 kHz, +4 dBu) Headphone Outputs Type: ¼” TRS Female, Stereo, Unbalanced Maximum Output Level: 150 mW/channel (56Ω load) Frequency Response: 20 Hz to 20 kHz (±0.2 dB, 56Ω load, 48 kHz) Dynamic Range: > 107 dB (A-wtd) Total Harmonic Distortion: < 0.02% (1 kHz, -1 dBFS, no load) Headphone Impedance (working range): 32Ω to 300Ω Digital Audio Connection Type USB 2.0 over USB-C™ Compatible Connection ADC Dynamic Range: 115 dB (A-wtd) DAC Dynamic Range: 115 dB (A-wtd) Bit Depth: 24 bits Internally Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz Clock Jitter: < 70 ps RMS (20 Hz – 20 kHz) Jitter Attenuation: > 60 dB (1 ns in => 1 ps out) Power 12 VDC, 1.2A, external power supply Physical Height: 2.4" (61 mm) Depth: 6.8" (172 mm) Width: 9.6" (244 mm) Weight: 2.2 lbs (1 kg)

12 Input Analogue Live and Studio Mixer with MIDAS Microphone Preamplifiers Live performance and studio recording analogue mixer with 12 input channels 8 mono input channels with award-winning MIDAS microphone preamplifiers 2 electronically-balanced stereo line input channels on 1/4" TRS connectors 3 band EQ on mono channels with sweepable mid band 2 aux sends with pre/post fader switching 60 mm precision long-life faders Rugged chassis construction for durability in portable applications Auto-ranging universal switch-mode power supply Designed and engineered in England The compact DDA DM12 honours your stage or studio desktop space, while providing incredible sonic performance, amazing versatility – and an unheard of level of affordability. What is the secret behind DM12’s superb, studio-quality sound? The DM12 features 8 award-winning, MIDAS microphone preamplifiers with true +48 V Phantom Power, acclaimed by audio engineers the world over for their transparency and nuanced low noise, high-headroom design. Add to this TRS Line Inputs on all 12 channels (8 mono and 2 stereo), mono channel Inserts and 3-band EQ with midfrequency sweep, 2 switchable pre/post-fader aux sends, 2 monitor outs and 2-track RCA I/O, and you have an analogue work of art – the Powered by MIDAS DM12!

Tražite raznovrstan line/mic. mikser koji stane u rack kućište i umanjuje potrebu za tonom od vanjske opreme. 12-kanalni RX1202FX dolazi sa 24-bit efekt procesorom + 8 ugrađenih studijskih IMP "invisible" mikrofonskih pretpojačala. Ovaj mikser radi savršeno za manje bendove ili crkve, poslovne konferencije gde se koriste oba mikrofona u kombinaciji sa A/V opremom + kao sub-mikser za klavijature, bubnjeve, samplere ili višestruke vokale. Također je idealan izbor za višekanalni monitoring kod studijskog snimanja. Tehnička specifikacija: * Premium ultra-low noise, high headroom analog 3U rack mount mixer * 8 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps * Neo-classic "British" 2-band EQs for warm and musical sound * Studio-grade FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects * Switchable +48 V phantom power for condenser microphones * 4 additional balanced high-headroom line inputs * CD/Tape inputs assignable to Main mix or Control Room/Phones outputs * 2 Aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for internal FX or as external send * Separate Control Room, Phones and stereo CD/tape outputs * Balanced Main mix outputs with gold-plated XLR connectors * Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls * "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving * High-quality components and exceptionally rugged construction ensure long life * Conceived and designed by BEHRINGER Germany

Serija Drive ima najveći raspon aktivnih i pasivnih zvučničkih kutija, od 10" do 15" i odgovarajući 15" Sub. Nudeći do 1200W snage za određene modele, specifikacija i kvalitet ovih injekcionih zvučnika postavljaju ovu seriju u prvi red za pristupačne, robusne i odlične zvučnike. Postoji ukupno 13 modela, 3x10", 4x12", 4x15" i 2x15" Sub. Aktivan i pasivan, sa ili bez Bluetooth i MP3 medijskih stanica i konačno sa DSP izborom. Mogućnosti su beskonačne. Aktivni modeli imaju 3-pojasni EQ, mikrofon/linijske ulazne konekcije na XLR i Jack, kontrolu pojačanja i nivoa i mogućnost povezivanja više zvučnika iz jednog izvora signala. Nova pojačala klase D u ovim modelima dizajnirana su da isporučuju veliku snagu i čist zvuk na svim nivoima snage. Svi modeli imaju odličan visokokvalitetni kabinet, sa dodatnim prednostima povezivanja polova zvučnika od 35 mm, višestrukim M10 tačkama i velikim ručkama za nošenje. product Features 15″ two way active full range cabinet 310 watts (RMS) High quality durable injection moulded cabinet Class D amplification Lightweight, high powered components 3 band EQ product Specification Format: 15″ two way active full range cabinet Frequency response (-10dB): 45Hz – 20kHz Input sensitivity (Line): 0dBu Input sensitivity (Mic): -36dBu Max SPL: 127dB Amp Power: 620W(PGM), 310W(RMS) / 250W(LF) + 60(HF) LF: 15″ woofer / 50mm voice coil HF: 34mm compression driver / 1.5″ throat Coverage (HxV): 80° x 40° Crossover: 2.0kHz Input Connection: Jack/XLR Power voltage: 115V / 230V Hanging system: 5x M10 hanging points Dimension W*H*D: 450 x 710 x 370 (mm) Weight: 22KG

Serija Drive ima najveći raspon aktivnih i pasivnih zvučničkih kutija, od 10" do 15" i odgovarajući 15" Sub. Nudeći do 1200W snage za određene modele, specifikacija i kvalitet ovih injekcionih zvučnika postavljaju ovu seriju u prvi red za pristupačne, robusne i odlične zvučnike. Postoji ukupno 13 modela, 3x10", 4x12", 4x15" i 2x15" Sub. Aktivan i pasivan, sa ili bez Bluetooth i MP3 medijskih stanica i konačno sa DSP izborom. Mogućnosti su beskonačne. Aktivni modeli imaju 3-pojasni EQ, mikrofon/linijske ulazne konekcije na XLR i Jack, kontrolu pojačanja i nivoa i mogućnost povezivanja više zvučnika iz jednog izvora signala. Nova pojačala klase D u ovim modelima dizajnirana su da isporučuju veliku snagu i čist zvuk na svim nivoima snage. Svi modeli imaju odličan visokokvalitetni kabinet, sa dodatnim prednostima povezivanja polova zvučnika od 35 mm, višestrukim M10 tačkama i velikim ručkama za nošenje. product Features 12″ two way active full range cabinet Bluetooth playback USB/SD card player, SD card recording 310 watts (RMS) High quality durable injection moulded cabinet Class D amplification Lightweight, high powered components 3 band EQ product Specification Format: 12″ two way active full range cabinet Frequency response (-10dB): 50Hz – 20kHz Input sensitivity (Line): 0dBu Input sensitivity (Mic): -36dBu Max SPL: 126dB Amp Power: 620W(PGM), 310W(RMS) / 250W(LF) + 60(HF) LF: 12″ woofer / 50mm voice coil HF: 34mm compression driver / 1″ throat Coverage (HxV): 80° x 40° Crossover: 2.0kHz Input Connection: Jack/XLR Power voltage: 115V / 230V Hanging system: 5x M10 hanging points Dimension W*H*D: 390 x 630 x 360 (mm) Weight: 19KG

1000 Watt 2 Way 15" Powered Loudspeaker with Digital Mixer, Wireless Option, Remote Control via iOS* / Android* Mobile App and Bluetooth Audio Streaming The EUROLIVE B15X active loudspeaker is exactly what you’ve come to expect from BEHRINGER – more power, more features and absolutely more affordable! Our engineers have created a powered loudspeaker that merges 1000-Watt Class-D power amp technology, a 3-channel digital mixer with gain setting recall that is “wireless ready” for our ULM Series digital microphones (available separately), integrated DSP – and exceptional portability. Then we loaded the B12X with our best 15" long-excursion driver for incredibly deep bass, and a state-of-the-art 1.35''; phenolicdiaphragm compression driver for exceptional high-frequency reproduction. Built-in Bluetooth connectivity allows you to stream music from your smart-phone, tablet or other Bluetooth-equipped device – and you can even control the system via our free iOS*/ Android* mobile apps. The B15X professional active loudspeaker is destined to become a legend in its own right, alongside the other EUROLIVE models that have made BEHRINGER the world leader in active loudspeakers. High-power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications Remote control 3-channel digital mixer with gain setting recall "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included) Comprehensive remote control via iOS*/ Android* mobile app available free of charge High quality Bluetooth* stereo audio streaming DSP presets for application type and speaker positioning KLARK TEKNIK Digital Signal Processing for total system control Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction Intuitive single rotary control user interface with LCD display for ease of navigation Ultra-wide dispersion, large-format exponential horn Versatile trapezoidal enclosure design allows different positioning: - Stand mounting with 35-mm pole socket - Tilts on its side for use as a floor monitor Ergonomically shaped handles for easy carrying and setup Designed and engineered in Germany