Class AB power The 7000A has a discrete Class AB power amp stage which delivers 70W per channel into eight ohms, and for difficult loads a maximum current delivery of 9A amps. Superior linearity and excellent thermal stability is ensured with the output stage of the discrete power amp ciruits using a CFB topology. And the amp stays in firm control of the music with excellent dynamic range, helped by the 250VA toroidal transformer and the 4x15000uF reservoir capacity. Multiple Sources Cover all bases with high quality for all. For CD players and line-level sources you have dual analog inputs, for digital sources dual Coax and SPDIF inputs, and for wireless audio playback and smart devices you have a BLuetooth aptX receiver. Plus, the Audio Return Channel (ARC) connection allows for use with screens, and there is a direct-to-PC connection via USB. Cutting-edge DAC The 7000A's ESS ES9038Q2M chip reaffirms the integration and synergy standard with audiolab integrated amplifiers. It utilises both 32--bit HyperStream architecture and Time Domain Jitter Eliminator from ESS Technology. Plus, it has ultra-low noise and high dynamic range thanks to a post-DAC filter based on class A topology and its proprietary DC-coupled high-gain electronic amp. Super streaming The 7000A has full decoding of MQA - which is a hi-res streaming technology. What this means, is the 7000A does the complete 'three unfold' decoding process internally - instead of a final unfold in a final MQA 'renderer' - so it is great for premium audio streaming services such as Tidal. Integrated Phono Solution For moving magnet phono cartridges, the 7000A has an improved phono stage, with an improved high-quality, low noise MM Phono circuit, as well as precise RIAA equalisation. This is the same with its dedicated headphone output - which has current-feedback circuitry, gain bandwidth and a high slew rate, ensuring a dynamic, detailed and engaging performance. Interface and graphics The 7000A includes an improved display and GUI, so you can more easily visualise your settings. It can be set to show a VU meter in both 'analog' or 'digital' form. And the GUI also has settings for the digital phase lock loop of the D/C converter. Features 2 x 70W (8 ohms) / 2 x 110W (4 ohms) Class AB ES9038Q2M 32-bit DAC 2.8" (480x640mm) Full View IPS LCD Built in Certified Hardware MQA Full Decoder (PC USB, Coax / Optical) Bluetooth 5.0 (aptX / aptX LL) Support Low Noise Moving Magnet Phono Stage Dedicated Current-Feedback Headphone amp Integrated / PRE-POWER / PRE only Modes VU Digital / VU Analogue Meter USB Upgrade Support Net Weight 8.4kg Gross Weight 10.7kg Dimensions (mm) (W x D x H) 444 x 340 x 78 Carton Size (mm) (W x D x H) 500 x 455 x 140 Standby Power Consumption <0.5W Finish Black / Silver Power Requirements 220-240V 50/ 60Hz; (depending on region) 100-120V 50/ 60Hz Standard Accessories Power Cord, Remote Control, User Manual, Antennas, etc. Inputs 3 x Analogue, 1 x Phono (MM), 1 x Power Amplifier, 2 x SPDIF (Coax), 2 x SPDIF (Optical), 1 x HDMI ARC, 1 x PC USB (USB B), 1 x Bluetooth (aptX/aptX LL), 1 x 12V Trigger Outputs 1 x PRE Amplifier, 1 x Stereo Speaker, 1 x Headphone, 1 x 12V Trigger Sampling Frequency Optical / Coaxial: 44.1kHz - 192kHz PC USB: 44.1kHz-768kHz (PCM) / DSD64, DSD128, DSD256, DSD512 Preamplifier Section Gain +6dB (Line); +55dB (Phono MM) Input Sensitivity 820mV (Line, Volume = 0dB); 3.1mV (Phone MM, Volume = 0dB) Input Impedance 10K (Line); 47K // 100pF (Phono MM) Total Harmonic Distortion (THD) < 0.0005% (1kHz @ 2V, Volume = 0dB) Frequency Response 20Hz-20kHz (+/-0.1dB) Output Voltage 2.3V max. (Volume = 0dB) Output Impedance 100 ohms Signal-to-Noise Ratio > 110dB (Line, A-weighted); > 76dB (Phono MM, A-weighted) DAC D to A Converter ES9038Q2M Total Harmonic Distortion (THD) < 0.0005% (1KHz @ 0dBFS) Output Level (0dBFS, 1kHz) 2.1Vrms Max. Sampling Frequency Optical, Coaxial: 192kHz; Ethernet, WiFi: 192kHz; USB A: 48kHz; PC USB: PCM768kHz, DSD512 Power Amplifier Section Gain +29dB Rated Power Output 2 x 70W (8 ohms, THD<1%); 2 x 110W (4 ohms, THD<1%) Frequency Response 20Hz-20kHz (+/-0.3dB) Total Harmonic Distortion (THD) <0.003% (1kHz @ 40W / 8 ohms) Input Sensitivity 720mV Signal-to-Noise Ratio (S/N) > 110dB (A-weighted) Max. Output Current 9A Headphone Amplifier Total Harmonic Distortion (THD) < 0.01% (1kHz, 50mW) Output Impedance 4.7 ohms Load Impedance 20-600 ohms

The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. This new Quad Amplifier is an exceptionally neat and convenient way to bring true high-fidelity sound to the varied nature of modern music collections – from vinyl and CD to digital streaming and hi-res files – via all manner of playback devices. MM Phono Stage input Several Digital inputs including USB and Optical Pre-amp output Small footprint allows flexible positioning in any Hi-Fi set up Analogue Upgrades Significant improvements have also been made to the Vena II’s analogue stages. Like the original model, the new amp sports a Class AB power amp section that draws on Quad’s many decades of design experience. Music In The Blood Quad, the distinguished British audio brand, is launching a new version of one of its most popular products of recent years – the Vena integrated amplifier. The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. Vena en Vogue Smart aesthetics are important to today’s music lovers. The Vena II’s small footprint (compared to many amps in its class) allows flexible positioning and ensures the amp slips tidily into a range of environments. The amp‘s dapper design is enhanced by a choice of five finishes: Quad’s classic Lancaster Grey, Silver or the three premium finishes – Mahogany, Gloss Black and Gloss White which wrap the Vena II’s aluminium housing in veneered or lacquered wood. Digital Developments Beneath the hood, the Vena II sports significant upgrades. The digital audio circuitry has been improved, the Cirrus Logic DAC chip found in the original Vena replaced by an ES9018K2M from the Sabre32 Reference family. This enables the Vena II to benefit from ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range. Pre-Amplifier Section Analogue Inputs 2x Line-Level RCA 1x MM Phono Analogue Outputs 1 x RCA (pre-out) Analogue Input Sensitivity 450mV (Line-Level) 4.1mV (MM phono) Analogue Input Impedance 10kΩ (Line-Level); 47kΩ 100pF (MM phono) Frequency Response 20Hz-20kHz Total Harmonic Distorion (THD) < 0.002% Signal-To-Noise > 110dB (A-Weighted) Power Amplifier Section Power Output 2x 45W RMS (8Ω) 2x 65W RMS (4Ω) Frequency Response 20Hz-20kHz Total Harmonic Distortion (THD) < 0.005% (30W, 8Ω) Signal-to-Noise > 108dB (A-Weighted) Digital Section DAC Chip ESS Sabre32 ES9018K2M Digital Inputs 2x Optical 1x Coaxial 1x USB Type A Bluetooth Max Sampling Frequency – USB PCM 384kHz DSD256 Max Sampling Frequency – Optical/Coaxial PCM 192kHz Digital Outputs 1x Coaxial 1x Optical General Dimensions (W x H x D) 301mm x 96mm x 313mm Weight 6 kg

The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. This new Quad Amplifier is an exceptionally neat and convenient way to bring true high-fidelity sound to the varied nature of modern music collections – from vinyl and CD to digital streaming and hi-res files – via all manner of playback devices. MM Phono Stage input Several Digital inputs including USB and Optical Pre-amp output Small footprint allows flexible positioning in any Hi-Fi set up Analogue Upgrades Significant improvements have also been made to the Vena II’s analogue stages. Like the original model, the new amp sports a Class AB power amp section that draws on Quad’s many decades of design experience. Music In The Blood Quad, the distinguished British audio brand, is launching a new version of one of its most popular products of recent years – the Vena integrated amplifier. The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. Vena en Vogue Smart aesthetics are important to today’s music lovers. The Vena II’s small footprint (compared to many amps in its class) allows flexible positioning and ensures the amp slips tidily into a range of environments. The amp‘s dapper design is enhanced by a choice of five finishes: Quad’s classic Lancaster Grey, Silver or the three premium finishes – Mahogany, Gloss Black and Gloss White which wrap the Vena II’s aluminium housing in veneered or lacquered wood. Digital Developments Beneath the hood, the Vena II sports significant upgrades. The digital audio circuitry has been improved, the Cirrus Logic DAC chip found in the original Vena replaced by an ES9018K2M from the Sabre32 Reference family. This enables the Vena II to benefit from ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range. Analogue Inputs 2x Line-Level RCA 1x MM Phono Analogue Outputs 1 x RCA (pre-out) Analogue Input Sensitivity 450mV (Line-Level) 4.1mV (MM phono) Analogue Input Impedance 10kΩ (Line-Level); 47kΩ 100pF (MM phono) Frequency Response 20Hz-20kHz Total Harmonic Distorion (THD) < 0.002% Signal-To-Noise > 110dB (A-Weighted) Power Amplifier Section Power Output 2x 45W RMS (8Ω) 2x 65W RMS (4Ω) Frequency Response 20Hz-20kHz Total Harmonic Distortion (THD) < 0.005% (30W, 8Ω) Signal-to-Noise > 108dB (A-Weighted) Digital Section DAC Chip ESS Sabre32 ES9018K2M Digital Inputs 2x Optical 1x Coaxial 1x USB Type A Bluetooth Max Sampling Frequency – USB PCM 384kHz DSD256 Max Sampling Frequency – Optical/Coaxial PCM 192kHz Digital Outputs 1x Coaxial 1x Optical General Dimensions (W x H x D) 301mm x 96mm x 313mm Weight 6 kg

A heavily featured streaming amplifier that combines the sonic genes of Technics Grand Class components with a wealth of source functions, including video connectivity, the SU-GX70 Network Audio Amplifier easily integrates into the home hi-fi system with the inclusion of an HDMI ARC port. Features Full Digital Amp, JENO Engine The SU-GX70 uses a fully digital amplifier that incorporates Technics’ renowned digital audio technology. lts digital transmission system processes signals fully digitally in all stages from input to output. Compared to analogue transmission, this system is less susceptible to signal degradation caused by external noise, ensuring more precise signal transmission. Accurate signal processing not only delivers high-resolution digital audio but also maintains the soft texture inherent in analogue recordings. Further, a JENO Engine has been used in the HDMI ARC (Audio Return Channel), which has been installed in a Technics product for the first time. This helps to reduce any degradation in sound quality caused by jitter during the transmission of digital audio signals (S/PDIF), ensuring unparalleled levels of clarity in TV audio. High-quality audio components have been used in various other locations, too. For example, chip film capacitors have been used in place of power supply noise-reduction capacitors and signal path coupling capacitors. Ideal Impulse Response through LAPC Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimization algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This technique enables flattening of the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, while also delivering a sound with rich spatial expression. Twin Power Supply Circuit System The design of the power supply is extremely critical in audio systems containing amplifiers, digital circuits and other such components. To eliminate any adverse effects on the amplifier, the SU-GX70 is equipped with a dedicated power supply for the power amplifier circuits that is independent from all other circuits. As such, the same electrolytic capacitors installed in high-end models have been used in the dedicated amplifier power supply and the power amplifier components. Further, by using the shortest possible connection between the power supply and the power amplifier, the SU-GX70 ensures low noise and low impedance. Elsewhere, the connections between the speakers and power amplifier use non-magnetic brass screws. The SU-GX70 uses a high-speed switching power supply of approximately 130 kHz. By increasing the switching frequency, noise interference on the music playback bandwidth is reduced. This enables highly responsive power supply for music signals and powerful speaker drive capability. High-Quality Audio through Low-impact HDMI Video Output For the SU-GX70 to receive audio signals through the HDMI ARC (Audio Return Channel), due to the specifications, video signals must first be output from the SU-GX70. However, the output of these signals can cause unwanted noise. As such, the video signals are output from the SU-GX70 at a lower rate, and the digital value of the color of each pixel is set to zero. This ensures low-load operation between the HDMI transmitting/receiving devices, preventing any unwanted noise generation from the video signals. This also reduces any impact on sound quality. Further, transmitting the signals from the TV to the JENO Engine via the shortest possible route minimizes any further impact from jitter. This is a mechanism unique to Panasonic/Technics as HDMI licensors. Pure Amplification ModeI In Pure Amplification Mode, shutting off the power supply to the network and HDMI circuits removes any noise from the device or antenna. This ensures music playback with even better clarity. Analogue Input Using Discrete Amp Circuits The discrete amp circuit used in the SU-GX70 was redesigned and adapted from the circuit used in the SU-R1000, and the same symmetrical layout has been used. Further, other high-quality audio parts of the same grade as those used in the SU-R1000 have also been adopted, such as low-noise FETs, thin-film resistors, film capacitors, and electrolytic capacitors. In this way, analog input has been fine-tuned to every detail. Abundant Input Options, Diverse Network Functions High-quality music and audio from video source Newly equipped with an HDMI ARC, low-impact HDMI video output ensures users can enjoy high-quality music and audio from the video source. Compatible with a variety of music sources The SU-GX70 supports a variety of music sources including radio, analogue input (PHONO(MM)/LINE), optical digital input (such as TV), coaxial digital input and USB input. Enjoyment of high-quality sound wirelessly The SU-GX70 can play back high-resolution music wirelessly from the source stored in a smartphone, tablet or PC. It supports not only Bluetooth® and AirPlay2 but also Spotify Connect®, Internet radio and Chromecast built-in™ so that a wide range of music streaming services can be enjoyed only with the SU-GX70. Space Tune™ for Optimal Adjustmentof Sound Quality The SU-GX70 is equipped with the “Space Tune” function, which enables the adjustment of sound space according to the room environment and installation location so that anyone can enjoy superb music reproduction. By using the “Technics Audio Centre*” app for tablets/smartphones or by selecting a setting from the four presets—“Free,” “Wall,” “Corner” and “In a Shelf”—using the main unit according to the installation location, the user can achieve the most suitable sound quality for a specific acoustic environment. Furthermore, the “L/R Custom” feature lets the user enter the setting independently for the left and right speakers when the speakers are set up in different installation conditions. This brings out the best sound reproduction in any installation conditions. * Available for iOS devices only Premium Design We have ensured high-quality design throughout, including the 7mm thick aluminum front panel with a hairline finish and the engraved Technics logo. Specification Output Power 40W+40W(1kHz,T.H.D.1.0%,8Ω,20kHz LPF) / 80W+80W(1kHz,T.H.D.1.0%,4Ω,20kHz LPF) FTC Output Power 30W + 30W ( 1kHz, T.H.D. 1.0%, 8Ω, 20kHz LPF ) / 60W + 60W ( 1kHz, T.H.D. 1.0%, 4Ω, 20kHz LPF ) Load Impedance 4Ω-16Ω Frequency Response PHONO (MM): 20Hz – 20kHz ( RIAA DEVIATION ±1dB, 4Ω ) / LINE:20Hz – 40kHz ( -3dB, 4Ω ) / DIGITAL: 20Hz – 80kHz ( -3dB, 4Ω ) Input Sensitivity / Input Impedance PHONO (MM): 2.0 mV / 47 kΩ / LINE: 200 mV / 23 kΩ Analogue Input Terminal LINE x 2 / PHONO (MM) x1 Digital Input Terminal Optical digital x2 / Coaxial digital x1 / USB-A x1 / USB-B x1 Analogue Output Terminal PRE OUT x1 Digital Output Terminal HDMI ARC Headphone Output Yes, Stereo Φ6.3 mm (1/4″) USB-A USB-B PC(USB-B) USB 2.0 High-speed / USB Audio Class 2.0, Asynchronous mode LAN(DMR) Ethernet Interface LAN (100BASE-TX/10BASE-T) Wi-Fi LAN (100BASE-TX/10BASE-T) Chromecast built-in Yes AirPlay 2 Yes Bluetooth® (Support codec) Yes (AAC, SBC) Tuner FM Power Supply AC 120 V ,60 Hz Power Consumption 63W Accessories AC Cord, FM Indoor Antena, Remote Control, Batteries for Remote Control, Owner’s Manual Dimensions (16-15/16 x 3-55/64 x 14-31/64)inch Weight Approx. 6.7Kg (Please incorporate images when they enhance the content.)

The SU-G700M2 Stereo Integrated Amp has inherited the new domain of sound attained by the SU-R1000 Reference Class Amp. In addition to the full-digital JENO Engine with outstanding sound expressivity, the SU-G700M2 comes with a new power supply system that offers high-speed response and low noise. The three-section configuration is packed with noise and vibration prevention measures. The SU-G700M2 is complete with Phono MC input. It delivers extremely pure and dynamic sound regardless of whether the sound source is analog or digital. Exquisite, Grand-Class Amplifier with full-digital core amplifier technologies Natural, detailed sound with load adaptive phase calibration (LAPC) Vintage and modern connections with low distortion and a wide frequency range Gorgeous, sculptural body with sleek, hairline-brushed aluminum cabinet FEATURES (JITTER ELIMINATION AND NOISE-SHAPING OPTIMIZATION) JENO Engine In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimizing items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances. (LOAD ADAPTIVE PHASE CALIBRATION) LAPC Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimization algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression. Advanced Speed Silent Power Supply The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system. What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximizes the performance of the digital amplifier. Three-section Configuration In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping. Low-noise PHONO Input PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment. Class AA Headphone Amplifier The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is. Technics’ exclusive block capacitor The power supply unit for the amplifier features Technics’ exclusive block electrolytic capacitor optimized through scrupulous tuning, which was installed in the SU-R1000. Large ground terminal The large ground terminal accommodates a thick, large-diameter ground wire. Brass speaker terminals The screws used for securing the wires sending audio signals to the speaker terminals are made of nonmagnetic brass. Specification Output Power 70W + 70W (1kHz, T.H.D. 0.5%, 8Ω, 20kHz LPF), 140W + 140W (1kHz, T.H.D. 0.5%, 4Ω, 20kHz LPF) FTC Output Power 70W + 70W (1kHz, T.H.D. 0.5%, 8Ω, 20kHz LPF), 140W + 140W (1kHz, T.H.D. 0.5%, 4Ω, 20kHz LPF) Load Impedance 4Ω-16Ω Frequency Response - PHONO (MM) 2.5mV / 47kΩ Frequency Response - PHONO (MC) 300uV /100Ω Frequency Response - LINE 200mV / 22kΩ Analogue Input Terminal LINE x 2 (LINE1, LINE2 / MAIN IN), PHONO (MM/MC) x1 Digital Input Terminal Optical digital x2 (OPT 1, OPT 2), Coaxial digital x2 (COAX 1, COAX 2), USB-B x1 (PC) Analogue Output Terminal LINE OUT x1, PRE OUT x1 Headphone Output Yes, Stereo Φ6.3 mm PC (USB-B) USB 2.0 high-speed, USB Audio Class 2.0, Asynchronous mode Support Codec PCM Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit), DSD Yes (2.8 MHz, 5.6 MHz, 11.2 MHz) DSD control mode ASIO Native mode, DoP mode Power Supply AC 120 V ,60 Hz Power Consumption 95W Dimensions (W x H x D) 16-15/16 x 5-13/16 x 16-27/32 inch Weight Approx. 28 lbs Accessories AC Cord, Remote Control, Batteries for Remote Control, Owner's Manual

The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. This new Quad Amplifier is an exceptionally neat and convenient way to bring true high-fidelity sound to the varied nature of modern music collections – from vinyl and CD to digital streaming and hi-res files – via all manner of playback devices. MM Phono Stage input Several Digital inputs including USB and Optical Pre-amp output Small footprint allows flexible positioning in any Hi-Fi set up Analogue Upgrades Significant improvements have also been made to the Vena II’s analogue stages. Like the original model, the new amp sports a Class AB power amp section that draws on Quad’s many decades of design experience. Music In The Blood Quad, the distinguished British audio brand, is launching a new version of one of its most popular products of recent years – the Vena integrated amplifier. The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. Vena en Vogue Smart aesthetics are important to today’s music lovers. The Vena II’s small footprint (compared to many amps in its class) allows flexible positioning and ensures the amp slips tidily into a range of environments. The amp‘s dapper design is enhanced by a choice of five finishes: Quad’s classic Lancaster Grey, Silver or the three premium finishes – Mahogany, Gloss Black and Gloss White which wrap the Vena II’s aluminium housing in veneered or lacquered wood. Digital Developments Beneath the hood, the Vena II sports significant upgrades. The digital audio circuitry has been improved, the Cirrus Logic DAC chip found in the original Vena replaced by an ES9018K2M from the Sabre32 Reference family. This enables the Vena II to benefit from ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range. Pre-Amplifier Section Analogue Inputs 2x Line-Level RCA 1x MM Phono Analogue Outputs 1 x RCA (pre-out) Analogue Input Sensitivity 450mV (Line-Level) 4.1mV (MM phono) Analogue Input Impedance 10kΩ (Line-Level); 47kΩ 100pF (MM phono) Frequency Response 20Hz-20kHz Total Harmonic Distorion (THD) < 0.002% Signal-To-Noise > 110dB (A-Weighted) Power Amplifier Section Power Output 2x 45W RMS (8Ω) 2x 65W RMS (4Ω) Frequency Response 20Hz-20kHz Total Harmonic Distortion (THD) < 0.005% (30W, 8Ω) Signal-to-Noise > 108dB (A-Weighted) Digital Section DAC Chip ESS Sabre32 ES9018K2M Digital Inputs 2x Optical 1x Coaxial 1x USB Type A Bluetooth Max Sampling Frequency – USB PCM 384kHz DSD256 Max Sampling Frequency – Optical/Coaxial PCM 192kHz Digital Outputs 1x Coaxial 1x Optical General Dimensions (W x H x D) 301mm x 96mm x 313mm Weight 6 kg

The Sound of Science Outwardly, the 6000A bears strong resemblance to the 8300A with its rotary controls and large, central OLED display. Unlike its costlier, analogue-only sibling, it incorporates high-quality D/A conversion, enabling digital sources to be connected directly without an external DAC. It supplies four digital inputs, three line-level analogue inputs, an input for a turntable, wireless connectivity via Bluetooth and a dedicated headphone amp, in addition to its ability when driving loudspeakers. Digital Circuitry Much effort has been made to ensure the 6000A’s digital circuitry delivers the level of quality one might expect of a high-performance standalone DAC. As ever, Audiolab has turned to the ES9018 Sabre32 Reference chip family to perform D/A conversion, utilising ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range. Analogue Circuitry The 6000A’s discrete Class AB power amp stage delivers 50W per channel into eight ohms, with a maximum current delivery of 9 Amps into difficult loads. The output stage of the discrete power amp circuits uses a CFB (Complementary Feedback) topology, ensuring superior linearity and excellent thermal stability, as the idle current is kept independent of the temperature of the output transistors. A substantial 200VA toroidal transformer, followed by 4x15000uF reservoir capacity (60000uF in total), helps the amp to maintain firm control of the music whilst enabling excellent dynamic range. Turntables and Headphones In recognition of the recent vinyl revival, Audiolab has included a phono stage for moving magnet phono cartridges – a high-quality, low-noise, JFET-based circuit with precise RIAA equalisation. Similarly, an increasing number of people are using headphones for music listening, so Audiolab has incorporated a dedicated headphone amp with current-feedback circuitry. Gain (Max) +8dB (Line) +55dB (Phono MM) Input Sensitivity 720mV (Line, Volume = 0dB) 3.1mV (Phono MM, Volume=0dB) Input Impedance 10K (Line) 47K//100pF (Phono MM) Total Harmonic Distortion (THD) < 0.0004% (Line, 1KHz @ 2V, Volume = 0dB) Frequency Response 20Hz-20kHz (+/-0.1dB) Output Voltage 2.3V max. (Volume = 0dB) Signal-to-Noise Ration (S/N) > 110dB (Line, A-weighted) Digital to Analogue Conversion D to A converter ES9018K2M Total Harmonic Distortion (THD) < 0.0006% (1KHz @ 0dBFS) Output Level (0dBFS, 1KHz) 2.05V Max. Sampling Frequency 192KHz Signal-to-Noise Ratio (S/N) > 112dB (A-weighted) Digital Filters Fast Roll-off , Slow Roll-off , Minimum Phase Power Amplifier Section Gain +29dB Rated Max. Power Output 2 X 50W (8 ohm, THD<1%) 2 X 75W (4 ohm, THD<1%) Frequency Response 20Hz-20kHz (+/-0.3dB) Input Sensitivity 720mV Total Harmonic Distortion (THD) <0.003% (1kHz @ 40W/8ohm) Signal-to-Noise Ratio (S/N) > 110dB (A-weighted) Max. Output Current 9A Headphone Amplifier Total Harmonic Distortion (THD) < 0.01% (1kHz, 50mW) Output Impedance 2.35 ohm Load impedance 20-600 ohm General Standby Power Consumption <0.5W Power Requirements 240V ~ 50 - 60Hz 230V ~ 50 - 60Hz 115V ~ 50 - 60Hz 100V ~ 50 - 60Hz Dimensions (mm) (W x H x D) 445 x 65.5 x 300 Carton Size (mm) (W x H x D) 512 x 467 x 146 Weight 7.8kg (Net)

In its own simplistic style, the Advance Paris PlayStream A1 HDMI hi-fi amplifier offers ultra-modern functions. Here is a connected model that will give you multiple features thanks to its versatility. In addition to playing music from streaming services like Tidal, Qobuz and Spotify, it can also play songs that are shared on your local DLNA network and connect to other sources through its HDMI ARC port and analog inputs and digital. Find out more about this connected amp through the lines below. Connected amplifier Advance Paris PlayStream A1 HDMI: Ethernet and WiFi Your Advance Paris PlayStream A1 HDMI hi-fi amplifier offers dual Ethernet and Wi-Fi connectivity to allow you to efficiently browse the Internet and access the local network. If you are a big fan of online music platforms like TuneIn, Tidal or Deezer, this is the opportunity to treat yourself. This WiFi hi-fi amplifier also gives the possibility of accessing thousands of internet radio stations to listen to broadcasts, music and other programs. Feel free to connect to the local network to play the shared music, thanks to DLNA compatibility. Almost all audio formats, even the most recent, are supported thanks to the AKM DAC, a high-end model. Advance Paris PlayStream A1 HDMI hi-fi amplifier: complete connectivity Isn't it even more enjoyable to be able to enjoy great sound from your TV and other electronic sources? For this, you have a very comprehensive connection (analog and digital). 4 analog inputs and a pair of terminal blocks are completed with an HDMI ARC port, a coaxial and two optical inputs to provide you with the essentials in terms of connectivity. On the 4 analog inputs, you have 1 phono input to connect a vinyl turntable . With the HDMI ARC port, you can pair a 4K TVstate-of-the-art to your WiFi hi-fi amplifier to easily retrieve the sound station from TNT or streaming platforms. This is the opportunity for you to experience your films and series well through well-rendered soundtracks. Do not hesitate to combine a subwoofer for an even more exciting sound. The terminal blocks will allow you to connect banana plugs, large section cables or even forks to your connected amp. Advance Paris PlayStream A1 HDMI: high-end audio performance You are probably wondering what the sound performance of the Advance Paris PlayStream A1 HDMI hi-fi amplifier is! Note above all that it has been designed from high-end materials carefully selected to give it audiophile standards. The architecture implements large capacitors as well as an oversized power supply so that a large enough current reserve is provided. Class AB amplification equipped with high precision transistors completes the picture to allow the reproduction of a power of 2 x 52 watts into 6 ohms with great precision. We also note a wide frequency response that extends from 20 Hertz to 80 kHz, enough to offer you a high-caliber audio broadcast with this connected amp. All you have to do is add the Supplied accessories • Quick installation guide • Remote control + batteries • Wi-Fi antenna • Power cord Mark Advance Paris Model PlayStream A1 HDMI Color Black Amplification Amplification class Class AB Power per channel 52 Watts Connectivity Number of channels 2 RCA Line Inputs 3 entry (s) Subwoofer outputs 1 exit (s) Coaxial input 1 entry (s) Optical input 2 entrance (s) Network interface Wi-Fi, DLNA / UPnP, Ethernet RJ45 Additional Connectors HDMI input x 1, Headphone 6.35mm output x 1, MM phono input x 1, RCA output x 1 Audio processing DAC converter Asahi Kasei AKM Max Resolution 24 bits / 192 kHz Features Wireless audio transmission Bluetooth (receiver) Multiroom technology Advance PlayStream (Advance Paris) Main streaming services Spotify, Deezer, TuneIn, Tidal, Napster, Qobuz Voice control Without voice assistant Additional features Network player, Control application Dimensions and weight Width 430 mm Height (mm) 135 mm Depth 370 mm Weight 9.75 Kg

The Solo Uno brings total simplicity to the complex world of audio streaming by providing a compact, stylish and elegant streamer with a built-in amplifier. Boasting the classleading Arcam sound quality, the effortless system requires just two speakers, the Solo Uno and a mobile device using the native music app of choice via Apple Airplay2 or Google Chromecast. In addition, the Solo Uno can be updated “over the air” automatically to provide enhanced future streaming features and years of listening enjoyment. Class Leading Super-Efficient Amplifier Design Stylish Cast Aluminium Case A Simple System That Only Requires Two Speakers, The Solo Uno & An App GoogleCast, Airplay 2, uPnP Streamer Optimised For Low Noise and Minimum Distortion High-End Audio Circuitry Output Power (1kHz, 1% THD, Two Channels Driven) 50 Watts @ 4 Ohms 25 Watts @ 8 Ohms Amplifier Type Class D Inputs Wireless App Control Ethernet Network 3.5mm Jack Input AUX Input Sensitivity 2V Subwoofer Crossover Frequency 80 Hz Signal-to-Noise-Ratio (A-Weighted) 117dB Frequency Response 10Hz – 20kHz Power Requirements 100 - 240VAC, 50/60Hz Supplied Accessories Power Cord Wi-Fi Antenna User Manual & Registration Card Dimensions W x H x D (including speaker terminals) 140mm x 52mm x 213mm Net Weight 1.5 Kg

After the success of the A10 Classic, Advance Paris offers a more powerful version, with more connections and a dual mono construction for the amplification part. In the great tradition of Advance Paris to design products with many connectors, the A12 Classic is no exception to the rule… From HDMI to Phono (MM/MC), Analog RCA to AES-EBU, USB for computer to multiple optical and coaxial inputs, 2 speaker zones, Bluetooth (optional with X-FTB01 / X-FTB02) Great power and sound quality start with a good power supply. The A12 Classic will control any speaker thanks to its 2 toroidal transformers located on each side of the product. With 190W per channel in Class A/B, you can choose any speaker, from bookshelf to tall column. Even the outputs are well treated with balanced (XLR) and unbalanced (RCA) Pre-OUT connectors. And feel free to connect 2 subwoofers if you wish thanks to its two subwoofer outputs. A real concentrate of technology that does not forget the music! The “tube” sound The A12 Classic is equipped with 2 tubes on the pre-amplification part for a musical sound without any aggressiveness. Bluetooth for all The A12 Classic is equipped with a plug compatible with the Bluetooth dongles X-FTB01 (aptX) and X-FTB02 (aptX HD) (sold separately)for a simple and efficient connection. Thus equipped, the A12 Classic will receive music from your smartphone, tablet or computer. Output power 8Ω 2 x 190 W RMS Output power 4Ω 2 x 280 W RMS Bandwidth (-3dB) 10Hz-35kHz Distortion Inf. À 0,007% Signal to noise ratio 103 dB Channel separation > 75 dB Mains voltage 115-230V Max. consumption 600 W Standby power consumption Inf. AT 0.5 W Transformer 2, Toroidal Phono input MC (Moving Coil), MM (Moving Magnet) Record output 1 Amplifier-Preamplifier Disconnectable DAC PCM 1796 Optical Input 3 Coaxial input 3 USB input A 1 USB B input 1 Bluetooth module X-FTB01 (Optional), X-FTB02 (Optional) Output Pair of speakers 2 Settings Balance, Bypass, Hi Bias switch, Highs, Serious, Volume Tone +/- 10 dB VU-Meter Yes Tubes Yes Width 430 mm Height 195 mm Depth 455 mm Gross Weight 19,9 kg Net Weight 17.9 kg Analog RCA input 5 XLR analog input 2

Anniversary Edition upgrades in detail Internally, the amplifier features upgraded printed circuit boards with twice the amount of copper to further reduce the resistance of PCB traces and improve power delivery. All relevant capacitors have been upgraded to Nichicon’s high-quality audio-grade MUSE Series and the PCB-to- speaker-terminal wiring is Leema’s Reference 2 cable which features 16 woven cores plus multi-strand high-purity copper with individual strand silver-plate. All transistors are hand-selected and precision-matched in amplifier sets for optimal performance and the lowest distortion. The power amplifier transformers are Noratel ‘xtra quiet’ units, ensuring perfect power delivery without undesirable hum or excessive heat- generation. In a further nod to the amplifier’s Anniversary Edition status, Leema has included a number of additional documents. Each amplifier will be supplied with a passport-style system of documentation integrated into the manual, where three key stages of production are signed off by the engineer responsible along with the inclusion of the unit’s measured results Output power non-bridged mode: 148W rms 8 Ohms/Ch 292W rms 4 Ohms 320W rms 2 Ohms/Ch THD: 0.004% Noise: < -100 dB Frequency response: 5Hz - 80kHz (+0/-3 dB) Number of balanced inputs (XLR): 1 Number of un-balanced inputs (RCA): 3 Pre-out outputs: 1 Thermal protection: Yes LIPS® system: Master or slave Dimensions: 440x320x110mm Weight: 18Kg

The "A" in ARCAM stands for Amplification - this is our core competance. The A5 is the latest in more than 45 years of amplifier design and manufacture, going back to our first product in 1976 - the A&R Cambridge A60 amplifier. New components and materials have been painstakingly analysed and reviewed to ensure brilliant sound quality. So you can play music straight out of the box, the ARCAM A5 includes a Bluetooth solution with Qualcomm AptX Adaptive technology. This provides up to 24-bit HD audio for the best sound quality from your phone or tablet, no matter what you are playing. It can also connect to Bluetooth headphones so your listening experience can continue sensitively after dark. Hi-res audio is included with high resolution digital audio inputs included. Like any ARCAM integrated amplifier, we pay particular attention to the built in phono stage to ensure your records sound as lush and engaging as possible. ARCAM Class AB amplification - provides brilliant musicality 50W per channel (8Ω) - powers loudspeakers with ease Bluetooth with aptX™Adaptive Technology - for the best sound with the most convenience Specially selected components and materials - to deliver on sound quality Wired or Wireless Headphones - connect your headphones for quiet listening with, or without wires All new Radia design - Purposeful yet playful MM phono stage - ready for Turntables Hi-Res Digital Audio Inputs Plastic Free Packaging - for easy disposal of natural materials Specification Continuous power output (0.5% THD), per channel 50W (8Ω), 75W (4Ω) Harmonic distortion, 80% power, 8Ω at 1kHz 0.003% Number of analog inputs 3 (RCA pairs) Signal-to-noise ratio (A-wtd, ref. 50W, 1V input) 106dB Frequency response 20Hz—20kHz ± 0.2dB Phono (MM) Input impedance 47kΩ + 100pF Phono (MM) Input frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB Coaxial (RCA) supported sample rates (kHz) 192, 176.4, 96, 88.2, 48, 44.1 Optical (Toslink) supported sample rates (kHz) 192, 176.4, 96, 88.2, 48, 44.1 Supported bit depths (bit) 24, 16 Frequency response (filter 1) 20Hz—20kHz ± 0.2dB Headphone output maximum output level (RMS) into 32Ω/300Ω 2.5V/5V Headphone load range 16Ω - 2kΩ Mains voltage 100V or 110–120V or 220–240V, 50–60Hz Power consumption (maximum) 350W Power consumption (standby) <0.5W Dimensions W x D (including speaker terminals) x H (including feet) 431 x 344 x 83mm Weight (net) 8kg Weight (packed) 11kg Supplied accessories Mains lead(s), Remote control with 2 x AAA batteries, Quick Start Guide, Important Safety Instructions

Digital Stereo Amplifier with Bluetooth This compact digital amplifier has three selectable stereo inputs, two microphone inputs and is capable of delivering up to 55W max. per side. Mic volume, tone and echo effects are adjustable through rotary controls. Master Volume, Treble and Bass rotaries control tone and overall output. This amp also features built-in media player, Bluetooth connectivity and FM receiver. A multi-functional amplifier suitable for both domestic and commercial use. Efficient Class D digital amplifier Bluetooth connectivity Built-in media player with USB and SD card inputs and FM receiver A high output power of 55W max. per side 3.5mm stereo line input on the front panel 2 stereo line inputs on RCA 2 x 6.3mm microphone inputs Spring clip speaker output terminals Specification Power supply230Vac, 50Hz (IEC) Output impedance4 - 8 Ohms Input sensitivity : line380mV Input sensitivity : mic (unbalanced)15mV Output power : 8 Ohms2 x 25W rms / 2 x 40W max. (@ 1kHz 10% THD) Output power : 4 Ohms2 x 35W rms / 2 x 55W max. (@ 1kHz 10% THD) Bluetooth version2.3 FinishBlack Dimensions200 x 200 x 65mm Weight1.6kg

The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. This new Quad Amplifier is an exceptionally neat and convenient way to bring true high-fidelity sound to the varied nature of modern music collections – from vinyl and CD to digital streaming and hi-res files – via all manner of playback devices. MM Phono Stage input Several Digital inputs including USB and Optical Pre-amp output Small footprint allows flexible positioning in any Hi-Fi set up Analogue Upgrades Significant improvements have also been made to the Vena II’s analogue stages. Like the original model, the new amp sports a Class AB power amp section that draws on Quad’s many decades of design experience. Music In The Blood Quad, the distinguished British audio brand, is launching a new version of one of its most popular products of recent years – the Vena integrated amplifier. The new Vena II builds upon the strengths of its predecessor – compact design, a useful range of facilities and thoroughly engaging sound – by adding new features and enhancing sonic performance to form the beating heart of an affordable, high-performance audio system. Vena en Vogue Smart aesthetics are important to today’s music lovers. The Vena II’s small footprint (compared to many amps in its class) allows flexible positioning and ensures the amp slips tidily into a range of environments. The amp‘s dapper design is enhanced by a choice of five finishes: Quad’s classic Lancaster Grey, Silver or the three premium finishes – Mahogany, Gloss Black and Gloss White which wrap the Vena II’s aluminium housing in veneered or lacquered wood. Digital Developments Beneath the hood, the Vena II sports significant upgrades. The digital audio circuitry has been improved, the Cirrus Logic DAC chip found in the original Vena replaced by an ES9018K2M from the Sabre32 Reference family. This enables the Vena II to benefit from ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range. Pre-Amplifier Section Analogue Inputs 2x Line-Level RCA 1x MM Phono Analogue Outputs 1 x RCA (pre-out) Analogue Input Sensitivity 450mV (Line-Level) 4.1mV (MM phono) Analogue Input Impedance 10kΩ (Line-Level); 47kΩ 100pF (MM phono) Frequency Response 20Hz-20kHz Total Harmonic Distorion (THD) < 0.002% Signal-To-Noise > 110dB (A-Weighted) Power Amplifier Section Power Output 2x 45W RMS (8Ω) 2x 65W RMS (4Ω) Frequency Response 20Hz-20kHz Total Harmonic Distortion (THD) < 0.005% (30W, 8Ω) Signal-to-Noise > 108dB (A-Weighted) Digital Section DAC Chip ESS Sabre32 ES9018K2M Digital Inputs 2x Optical 1x Coaxial 1x USB Type A Bluetooth Max Sampling Frequency – USB PCM 384kHz DSD256 Max Sampling Frequency – Optical/Coaxial PCM 192kHz Digital Outputs 1x Coaxial 1x Optical General Dimensions (W x H x D) 301mm x 96mm x 313mm Weight 6 kg

All-in-one hifi system offering the versatility of streaming DTS Play-Fi enables streaming around the entire home Complete wireless control via phones, tablets and PC Multitude of input options offers versatile source switching Artera Solus Play The QUAD Artera Solus Play is the latest addition to the best-selling QUAD Artera series. It also heralds the arrival of wireless audio streaming and multi-room technology to the established QUAD Artera portfolio. Based on the recently upgraded and richly specified Artera Solus, the QUAD Artera Solus Play incorporates the acclaimed DTS Play-Fi platform for high resolution wireless audio streaming. With DTS Play-Fi Technology, music can be streamed over your wireless network in high-resolution format and can be easily expanded to an ultimate multi-room system if required. You can stream from any source on your wireless network, including smart-phones, tablets or PCs as well as a NAS Drive. The Artera Solus Play’s Wi-Fi networking is powered by DTS Play-Fi: an app-controlled platform enabling high-quality, whole-home wireless audio, capable of streaming hi-res music up to 24-bit/192kHz and supported by a greater range of established audio brands than any other wireless platform. The free Play-Fi app (available for iOS, Android and Kindle Fire devices, Windows PCs and Apple and Android smartwatches) is an intuitive gateway to a wealth of music services, including Spotify, Tidal, Amazon Music, Deezer, Qobuz, HDtracks, TuneIn, iHeartRadio and SiriusXM. It is also your trusty music butler, able to serve up a streaming library stored on any DLNA-compatible NAS drive or media server on the same home network. Favorite playlists and radio stations can be assigned as shortcut ‘presets’ within the app, while Works With Alexa support enables voice-controlled playback when the Artera Solus Play is paired with any Amazon Alexa-equipped device. WIRELESS STREAMING TECHNOLOGY Play-Fi supports a wide variety of file formats, including MP3, MP4A, AAC, FLAC, WAV and AIFF. In standard mode, which is optimised for multi-room bandwidth, audio is streamed at up to 16-bit/48kHz – akin to CD-quality. By engaging Play-Fi’s Critical Listening Mode, hi-res audio up to 24-bit/192kHz may be streamed to the Artera Solus Play over Wi-Fi or Ethernet cable, without transcoding or down-sampling. There are other ways to stream music to the Artera Solus Play wirelessly, other than via the Play-Fi app. Spotify users can connect directly from the Spotify app thanks to Spotify Connect, and you can stream from smartphones and tablets without connecting to the local Wi-Fi network thanks to aptX Bluetooth. Despite its attractive simplicity, the Artera Solus Play sports cutting-edge sophistication beneath the skin. At its heart nestles the ES9018 Sabre32 Reference, the eminent 32-bit, eight-channel hybrid multi-bit Delta-Sigma DAC chip, expertly implemented by Quad’s renowned electronics engineers. External sources benefit from this DAC’s exceptional quality via a range of digital inputs, handling PCM data up to 32-bit/384kHz as well as DSD64/128/256. This ensures the Artera Solus Play is equipped to make the most of today’s hi-res music formats, as well as future advances in ultra-high-definition digital sound. For CD replay, a slot-loading mechanism buffers data from the disc before feeding it to the asynchronous DAC section. Four digital filter options enable users to tailor the sound from both CDs and external digital sources, to suit personal taste and the nature of the source material. Get Connected Cable connectivity options are plentiful. Six digital inputs – two coaxial, two optical, USB Type B and Ethernet – cater for external digital sources (there’s also a USB Type A socket for software updates) while a pair of RCA inputs handle analogue sources. Analogue outputs are supplied in both single-ended RCA and balanced XLR varieties, with the four-channel volume control preserving the balanced signal path from the DAC to the XLR output. A pair of high-quality speaker binding posts, optical and coaxial digital outputs, a 12V trigger output and a front-mounted jack coupled to a dedicated headphone amp circuit complete a comprehensive connectivity array. Quad Artera Solus Play borrows more than just looks from its sibling, the Artera Solus – utilizing much of the same high-specification design, including the ESS ES9018 from the Sabre32 Reference DAC as well as the aptX Bluetooth connectivity, it has all the pure musicality of QUAD coursing through its very versatile circuitry. There is also a smattering of both digital and analogue connections, including a headphone socket. So, however you want to enjoy your music, analogue or digital, the QUAD Artera Solus Play will have you connected and ready to play… just add speakers. Amp It Up The Artera Solus Play’s preamp and power amp stages incorporate balanced circuitry, short and direct signal paths and high-quality components to preserve sonic purity. Volume is adjusted in the analogue domain under microprocessor control, outputting directly to the dual-mono Class AB power amp stage which delivers 2x75W into eight ohms. To minimise distortion, the power supplies for the left and right channels are isolated from each other as well as from the rest of the system. Bringing Freedom Of Choice, At Last Every single DTS Play-Fi product works perfectly with all the rest, regardless of brand, so you get a huge range of options to customize your home, and one simple, elegant listening experience. DTS Play-Fi offers an unparalleled selection of audio products for your home, from compact battery-powered speakers to powerful soundbars, built by the most respected audio brands in the business. No more compromising your style or taste to get a high-quality wireless audio solution. Works With Every Device You've Got Of course, your music is always close by. And we know you have all kinds of devices in your life. That’s why DTS Play-Fi is built especially for smartphones, tablets, and PCs. We have easy-to-use software for Android, iOS, Kindle Fires, and Windows. We support streaming via Spotify Connect, too. Any way you want to play, it just works. Whole Home Audio, Made Easy DTS Play-Fi sends audio from mobile devices to speakers throughout the home using proprietary streaming, synchronization, and authentication technology. General Description CD Player, DAC, Pre-Amp with Integrated amplifier Key Technology & Features DSD (up to DSD256 Compatible) / Bluetooth (aptX), DTS Play-Fi Technology Audio File Formats ALAC, WAV, FLAC, AIFF, WMA, MP3, AAC, AACHE, AAC+, DSD64, DSD128, DSD256 D/A Converter ESS ES9018 32bit DAC USB Input USB B (PC / MAC) Digital Audio Inputs 2 x Optical TOSlink, 2 x RCA (DIG1, DIG2) Digital Audio Outputs 1 x Optical TOSlink, 1 x RCA (DIG) Analogue Inputs 2 x RCA (AUX1, AUX2) Analogue Outputs 2 x RCA, 2 x Balanced XLR, 6.3mm Headphone Jack Speaker Outputs 1 Pair Speaker Terminals Sample Rate (USB B) 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz Sample Rate 44.1 - 192kHz (Digital Inputs / Outputs) Standby Power Consumption <0.5W Pre-Amplifier Section Output Level (1kHz) Variable Output RCA 0-2.3 Vrms / XLR 0-4.6 Vrms Frequency Response 20Hz-20kHz, 1kHz (± 0.2dB) Total Harmonic Distortion < 0.002% (@1KHz, BW=20Hz-20kHz) Signal to Noise Ration(S/N) > 110dB (A-weighted, ref. 1V) Channel Separation >100dB (1kHz) Power Amplifier Section Rated Power Output 2 x 75W (8Ω) Frequency Response ± 0.5dB (20Hz-20kHz, 1kHz) Total Harmonic Distortion < 0.003% (@1KHz, 50W/8Ω, BW=20Hz-20kHz) Signal to Noise Ration(S/N) > 108dB (A-weighted, ref. 75W) Channel Separation >82dB (A Weighted, ref.1W) Dynamic Range A-wtd >98dB Power Requirement (depending on region) 220V-240V~50-60Hz, 100V-120V~50-60Hz Dimensions & Weight Dimensions (Unpacked) 320 x 320 x 105mm Dimensions (Packed) 465 x 465 x 220mm Net Weight 11.5 kg Gross Weight 13.8 kg

Technology With the three-quarter-sized compact cabinet of I15, even greater possibilities open up for providing the highest quality music performance in even the smallest of living spaces. I15 utilises the same Hypex all analog class D power module as used in the award winning I15 Prisma. But, without the need to provide power to the digital to analog conversion stage and network player found in the I15 Prisma, the power supply has been configured to allow I15 to perform with even greater drive and detail. The look and feel of Scandinavia We believe that every aspect of our products – the way they look, the satisfying feel of the controls – contributes to the overall experience of living with Primare. As a result, Primare products exude the hallmarks of Scandinavian design – simple, elegant designs, with approachable and easy to understand functionality. An example of this is the compact, essentially three-quarter sized, of the 15 series, cabinets creating the sense of perfect proportions being just right for allowing placement within any living environment – or as we say lagom, not too much not too little, everything in balance, proportion, and harmony. System Building With the 15 Series, we offer a carefully considered array of models in order to allow for the best selection to fit any of your system needs. For example, the ultimate 15 Series system might be the DD15 CD transport, SC15 Prisma preamplifier and network player, I15 analog integrated amplifier, and R15 MM/MC phono preamplifier, allowing for the best performance, analog or digital, with the greatest number of connection options. However, there may be no need for additional digital inputs, MC phono preamplification may not be requirement, or simply to address budget or size considerations, a system composed of CD15 Prisma CD and network player with an I15 MM integrated amplifier with MM15 MM phono module installed could be assembled. This compact and reasonably priced system provides multiple analog source playback, including vinyl disc, as well as digital disc, stored or streamed media playback, with remarkable power, control, and connection flexibility. Output power2 x 60W/100W 8/4 ohms RCA5 x stereo analog pair inputs MMoptional MM phono stage board RCA1 x stereo analog pair line output RCA1 x stereo analog pair PRE output C25 remoteIR system control IR3.5 mm in/out RS232outboard system control port 12V triggerout Dimensions350 x 73 x 339 mm (WHD) Weight6.5 Kg Finishblack or titanium

NAIT XS 3 - Major performance upgrades and now with added love for vinyl. In the years since the last NAIT integrated amplifiers were released, Naim research and development team have worked on a range of amplifier improvements. The result is upgraded power amplifier sections for NAIT XS 3, delivering greater pace and intimacy to their musical delivery – whether it's driving a pair of loudspeakers or your favourite pair of headphones. The NAIT XS 3 has received significant performance upgrades, including a built-in phono stage, making it a perfect partner for turntables, as well as for streamers, CD players, or any other music source people want to enjoy with the signature Naim sound. The NAIT XS 3 offers much of the performance of Naim's reference quality SUPERNAIT 3 in a simpler, slimmer package combining a 70W power amplifier with five analogue inputs plus a phono stage. Its high-performance preamplifier stage is as transparent as you would expect from a Naim Audio amplifier, and it also shares the single-ended class-A headphone output of its larger sibling. The NAIT XS 3 can be upgraded with external power supplies, power amplifiers and even cabling upgrades to get the best from all sources. With Naim's typical obsessive attention to detail, all in service of achieving the most authentic musical performance – the NAIT XS 3 benefits from the following features: Class A headphone amplification Alps Blue Velvet volume control Reed relay input selection Ceramic insulators for the power transistors Galvanically isolated microprocessor control section Microphonic-isolating PCB mounts Audio Inputs MM Phono Input Via RCA, 47k parallel 470pF input impedance Suitable for 5mV cartridges Line Level Inputs 130mV sensitivity, 47k input impedance, suitable for 2V Power Amp In DIN Socket Audio Outputs Powered Accessory Sockets +24V for Naim phono amplifier Speaker Outputs 70W per channel into 8 ohms (4mm sockets) 100W per channel into 4 ohms Line Outputs Variable (level) Pre-amp (DIN), Bi-amp (DIN) Sub (RCA pair) 775mV <50 ohms Line Outputs Fixed (level) AV (DIN) Stream (DIN) 130mV 600 ohms Headphone Output 1/4 inch (6.35mm) TRS Socket Connectivity Updates 1 x USB mini-B Remote Input 1 x 3.5mm Jack on rear Finish Case Black powder coated Front Brushed and black anodised Physical Shipping Weight 12 kg Shipping Dimensions 200 x 590 x 500 mm Weight 8.5 kg Dimensions (HxWxD) 70 x 432 x 314 mm Power Power Consumption (max.) 350VA Mains Supply 115V, 230V; 50 or 60Hz Power Consumption (quiescent) 16VA General Supplied with NARCOM-5 Remote Control Mains Lead Link Plug Safety Manual User Control Front Panel - Volume control and front panel buttons Remote Control - Infra-Red (RC5)

They have numerous possibilities for both analog and digital use, benefitting from the latest technical innovations. Combined with the best components available at this time, they allowed to the listening, an exceptional rendering for dynamics without agressiveness,but reproducing the details of the music. The « Hi Bias » function allows it to supply easily most of the loudspeakers sold on the market. Its complete remote control device will make it easier to use. SPECIFICATIONS Snaga 8 Ω 2x75W RMS Snaga 4 Ω 2x110W RMS Frekvencijski odgovor (-3dB) 10Hz-35kHz Kontrola tona +/- 10 dB Distorzija < 0,1% Signal/šum odnos > 90 dB Separacija kanala > 70 dB Impedansa ulaza 47KΩ Impedansa ulaza za gramofon (Phono) 47KΩ Konverter digitalnog audio signala (low jitter) AK4113 Konverter rezolucija 24bit-192kHz USB B konverter Wolfson WM8740 X-MOS asinhroni konverter Da Nivo ulaza (CD/AUX...) < 300mV Nivo ulaza za pojačalo < 1,1V Nivo ulaza za gramofon (Phono MM) 2,5mV Bluetooth modul (opciono) APTX – AAC AC ulaz 115-230V Potrošnja energije 300W (X-i75) Transformator (1) Da Dimenzije (cm) H12 cm x W.43 cm x D.32 cm Neto težina 8,6 kg (X-i75) Analog Inputs : 1 phono MM input 1 CD input 1 Tuner input 4 Auxiliaries inputs 1 PC2 analog input 1 Record output 1 output for Subwoofer Amplifier –Preamplifier can be disconnected Digital Inputs : 2 Coaxial inputs 1 Optical inputs 1 Asynchronous USB B X-MOS input 1 USB A input for USB Key with MP3 files 1 module Bluetooth input 24 bits x 48 kHz (Optional module X-FTB01) Outputs : 1 Paire of loudspeakers 1 headphones plug 1 X 5 Volts output for WTX 500 Adjustment : - Volume - Balance - Bass - Trebble - Bypass -Hi Bias switch

Vodeće Regino integrisano pojačalo Dizajniran oko “minimalističkog” moćnog snagaša i topologije kola “pasivnog pretpojačala”, pasivne kontrole jačine zvuka i jednog pojačala između ulaza i zvučnika, Osiris nudi performanse i kvalitet izrade bez premca. Osiris je dizajniran kao savršen partner za ostatak referentnog sistema, kao što su Isis CDP, Valve Isis CDP i Aura MC gramofonsko pretpojačalo. GLAVNE KARAKTERISTIKE 162 W po kanalu na 8 Ω. 4 linijska ulaza. 1 balansirani ulaz preko XLR-a. Referentni CNC daljinski upravljač. Direct ulaz. Record izlaz. Referentni mrežni kabl. TEHNOLOGIJA Osiris je drajversko pojačalo niske distorzije i visoke linearnosti. Ova vrsta simetrične topologije kola obezbeđuje neophodne promene napona kako bi se omogućilo pokretanje bilo kog sistema zvučnika uz minimalni nivo distorzije. Osam Sanken 200 W izlaznih tranzistora se koristi u trostrukom visokonaponskom pretpojačalu omogućavajući Osirisu da sa lakoćom pokreće čak i najzahtevnije sisteme zvučnika. Pojačalo sa kaskodiranim diferencijalnim ulazom koristi dva niskošumna LED referentna generatora struje. Povratni nivoi otvorene i zatvorene petlje i komponente za opseg pojačanja optimizovane su da daju čvrstu i kontrolisanu zvučnu scenu, pogotovo na niskofrekventnom kraju zvučnog opsega. Nichicon audio kondenzatori se koriste na bajpasnim i razdvojnim pozicijama. Elektrolitni kondenzatori su zaobiđeni poliesterskim kondenzatorima gde je to bilo potrebno, poboljšavajući HF performanse. SM otpornici sa nisko indukcijskim premazom se koriste u izlaznoj sekciji. NAPAJANJE Osiris koristi dva niskošumna, namenski dizajnirana toroidna transformatora od 400 VA koji koriste visokokvalitetni, potpuno vezani materijal jezgra. Transformatori su montirani na šasiju koristeći Rega inovativnu tehniku montaže koja eliminiše prenos šuma sa transformatora u situaciji kada transformatori rade u teškim mrežnim (linijskim) uslovima sa visokim nivoom asimetrične oscilacije napona na električnoj mreži (vodu). Ovi transformatori u kombinaciji sa 40.000 Mikrofarada Rega K-Power kondenzatora za izravnanje po kanalu pružaju više nego dovoljno struje za pokretanje pri najvećim opterećenjima. Sva napajanja koriste ispravljačke diode za brzi oporavak. (Brze diode stvaraju manje visokofrekventnog preklopnog šuma, što dovodi do čistije struje). Ulazni i drajverska pojačala niskog nivoa se napajaju iz regulisanog simetričnog napajanja za praćenje sa referentnim naponom niskog šuma, koji obezbeđuje potpuno stabilizovanu niskonaponsku voltažu, obezbeđujući najviši nivo zvučne čistoće. Sva odgovarajuća audio napajanja napajaju samo audio kola. Ulazni prekidači, displej i mikro kontroler i zaštitna kola imaju sopstverne namenske izvore napajanja, održavajući put audio signala što je moguće čistijim. SPECIFIKACIJE Izlazno napajanje: 162 W po kanalu na 8 Ω Ulazna osetljivost: 160 W na 8 Ω, 250 W na 4 Ω Pojačanje: 44dB Record izlaz: 215 mV na 100 k Frekventni odziv: 10 Hz (-1.7 dB point) THD & Noise: manje od 0.05% Potrošnja: 560 W na 1125/230 V Dimenzije (ŠxVxD): 434 x 122 x 350 mm Težina: 25.6 kg

Važnost kvaliteta zvuka Io koristi isti snagaš i gramofonsko pretpojačalo kao i višestruko nagrađivani Brio. Io isporučuje izuzetan kvalitet zvuka u manjem i isplativijem pakovanju. Class A/B kolo deli svoj DNK sa ostatkom Reginih pojačala, a kao i obično, velika je pažnja posvećena odabiru komponenti. Sanken izlazni tranzistori, Alps potenciometar pojačanja i linearno napajanje omogućava izlaznu snagu od 30 vati po kanalu na 8 Ω. Dva linijska ulaza i visokokvalitetni MM gramofonski ulaz su dostupni kao izvori. Na prednjem panelu se nalazi izlaz za standardne Hi-Fi slušalice; one se pokreću iz sekcije pojačala snage preko releja kako bi se izbegla degradacija signala kada su slušalice priključene ili je uređaj isključen. Io dolazi sa redizajniranim mini daljinskim upravljačem. GLAVNE KARAKTERISTIKE Integrisano gramofonsko pretpojačalo. Utičnica za slušalice. Mini daljinski upravljač. Potpuno nova, prilagođeno kućište. Doživotna garancija na proizvodne greške. TEHNIČKE SPECIFIKACIJE Izlazna snaga: 30 W po kanalu na 8 Ω. Potrošnja: 135 W. Ulazi: 1 x gramofonski ulaz, 2 x linijski ulaz. Dimenzije (Š x V x D): 180 x 68 x 290 mm. Težina: 2,9 kg.

Its power of 2 x 50 Watts RMS into 8 Ohms, its « Hi Bias » function will allow it to supply easily most of the loudspeakers found on the market. Its complete remote control device will make it easier to use. Inputs /Outputs : 1 MM phono 1 CD 1 Tuner 4 Auxiliaries 1 PC2 1 USB for MP3 keys Ampli - Preamp can be disconnected 1 pair speakers SPECIFICATIONS : Output Power 8 Ω : 2 X 50 W RMS
 Output Power 4 Ω : 2 X 65 W RMS

 Frequency Response (-3dB): 10 Hz – 30 kHz Tone Control : +/- 10 dB Distortion : < 0,15%
 S/N Ratio > 85 dB
 Channel Separation > 70 dB Bluetooth A2DP 
Input Impedance : 10 kΩ
 Phono Input Impedance : 47 kΩ In Level of Aux Inputs : < 550 mV 
Amp in Level < 1.25 V 
Phono Stage Input Level : 2.5 mV 
AC Input : 230V
 1 toroïdal transformer 
Dimensions : H.11 cm x W.43 cm x D.32 cm Net Weight: 6 kg

Exceptional dynamic range, resolution of fine detail and remarkable clarity, allow the Hydra II to deliver music with captivating energy, even when driving the most demanding of modern audiophile loudspeakers. This exceptional design uses two massive torodial power transformers: one for each channel, together with a separate transformer for the control circuitry. The highly refined output stage features a very low output impedance. This, coupled with a high current capability ensures vice-like grip and precise control of the loudspeakers, even at very high levels. Variable gain LIPS® stereo power amplifier for use with the Leema Reference Series Pyxis pre-amplifier. Variable gain LIPS® handed mono power amplifier for use with the Leema Reference Series Pyxis pre-amplifier. Fixed gain stereo / mono power amplifier for use in conventional pre / power systems. Fixed gain LIPS® power amplifier for use with the Tucana II in bi / tri-amplification systems. Variable gain LIPS® slave power amplifier for use with the Tucana II in multi-channel systems. Three source LIPS® amplifier for use with the Leema Antila CD player. Acclaim Hi-Fi News: Outstanding Product, October 2010 The Collection, October 2010 Hi-Fi News: Outstanding Product (Yearbook), November 2010 Specification / Features (See User Manual for full specification) OUTPUT POWER IN NON-BRIDGED MODE Output Power: 148W rms 8 Ohms/Ch Output Power: 292W rms 4 Ohms/Ch Output Power: 320W rms 2 Ohms/Ch OUTPUT POWER IN BRIDGED MODE Output Power: 392W rms 8 Ohms/Ch Output Power: 785W rms 4 Ohms/Ch THD: 0.004% Noise: < -100 dB Freqency Response: 5 Hz - 80 kHz (+0/-3 dB) Number of balanced Inputs (XLR): 1 Number of un-balanced Inputs (RCA): 3 Pre-out Outputs: 1 Thermal Protection: Yes LIPS® system: Master or Slave Dimensions: 440*320*110mm Carton: 590*450*210mm Mass: 18Kg Downloads Manual Additional Information Brochure

Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning sure to please European ears. WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo’s hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound. 50 W + 50 W high-current amplification WRAT (Wide Range Amplification Technology) Direct Mode for source-authentic audio reproduction Optimum Gain Volume Circuitry for clear low-volume playback Phase Matching Bass Boost 4 analog RCA inputs Subwoofer pre-out Easy-to-use controls for smooth operation without a remote Auto Power Standby Stable High-Current Power Dynamic changes in music cause impedance to fluctuate. If power can’t be delivered when impedance drops, sound quality suffers. Onkyo’s solution is WRAT, specifically its high-output EI transformer, huge custom-made main audio capacitors, and carefully selected high-quality parts. High-current stability controls the speaker-drivers for accurate and assured reproduction of dynamic musical passages. Further, the A-9110 features Onkyo’s time-proven low-negative-feedback amplifier topology that distinguishes the timbral warmth, fullness, and vibrancy of the recording. This circuitry captures a wide frequency spectrum with uncommonly low distortion. Sounds Clearer at Low Volumes When playing music at low volume, the signal normally drops close to the component’s noise floor. The signal picks up noise, which is amplified, and the result is muffled sound.To avoid this, the A-9110 features Optimum Gain Volume Circuitry, a volume circuit that requires less than half the usual amount of attenuation. The signal never approaches the noise floor, so you can enjoy clearest sound at low volume. Thick and Rigid Chassis Tames Resonance Every hi-fi component generates electromechanical resonance. This translates into signal noise, and that impacts on the sound coming out of your speakers. To combat the negative effects of vibration, the A-9110 features a rigid metal chassis that’s 1.3 times thicker than the A-9010 at 1.6 mm. Working together with large, wide-spaced insulators, unwanted resonance is virtually eliminated. Phase Matching Bass Boost Most pre-main amps have a loudness button designed to boost low-mid frequency sound. However, conventional designs are prone to phase-shift, which degrades the clarity of the vocal frequency band. Onkyo’s Phase Matching Bass Boost function eliminates phase-shift between low- and mid-range frequency bands above 300 Hz. Bass response is enhanced without compromising vocal clarity, and that’s something especially useful when playing music at low volume where bass and high-frequency sounds are more difficult to hear. Direct Mode Brings You Closer to The Source Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-pathlengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound. Enjoy end-to-end analog music reproduction from turntable to speakers, and recapture the atmosphere of the original recording with any connected source. Quality Speaker-Posts Make Perfect Contact Speaker cables with your choice of terminal are firmly secured by high-quality speaker binding posts. Each wide-spaced non-magnetic post prevents interference and features a large, easy-to-grip transparent knob. Power Output 50 W + 50 W (4 Ω, 20 Hz–20 kHz, 0.9%, 2 channels driven, IEC) Dynamic Power 220 W (3 Ω, Front) 190 W (4 Ω, Front) 110 W (8 Ω, Front) THD+N (Total Harmonic Distortion + Noise) 0.05% (8 Ω, 1 kHz, half power) Input Sensitivity and Impedance Line 200 mV/47 kΩ Phono MM 4 mV/47 kΩ (IHF-A) Rated RCA Output Level and Impedance 0.2 V/2.3 kΩ (Line Out) 1 V/ 500 Ω (Subwoofer Pre-Out) Phono Overload 70 mV (MM, 1 kHz, 0.5%) Frequency Response 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode) Tone Control ±10 dB, 100 Hz (Bass) ±10 dB, 10 kHz (Treble) Signal-to-Noise Ratio 103 dB (IHF-A, Line In, Speaker Out) 78 dB (IHF-A, Phono In, Speaker Out) Speaker Impedance 4–16 Ω General Power Supply AC 220–230 V, 50/60 Hz Power Consumption 130 W Standby Power Consumption 0.2 W No-Sound Power Consumption 14.3 W Dimensions (W x H x D) 435 x 129 x 330 mm Weight 7.0 kg Carton Dimensions (W x H x D) 572 x 252 x 419 mm Weight 9.0 kg Supplied Accessories Instruction Manual, Remote Controller, AAA (R03) Batteries x 2

60 W + 60 W high-current amplification WRAT (Wide Range Amplification Technology) Direct Mode for source-authentic audio reproduction Phase Matching Bass Boost Two large custom-fabricated 10,000 µF audio-grade main capacitors Optimum Gain Volume Circuitry for clear low-volume playback 5 gold-plated analog RCA inputs 2 digital audio inputs (1 coaxial, 1 optical, 192 kHz/24-bit-capable) 1 phono input with discrete MM phono equalizer Subwoofer pre-out Fine display shows active input Independent bass and treble tone controls and balance control Auto Power Standby Hi-Fi-Grade Digital Board With Wolfson® DAC Digital sources are decoded by a premium Wolfson WM8718 DAC on the A-9130’s digital audio board. This D/A converter is frequently installed on top-shelf audio components thanks to exceedingly good performance and supports 192 kHz/24-bit audio playback. TOSLINK or coaxial digital audio inputs are also ready to amp your TV entertainment, bringing powerful hi-fi sound to movies, games, sporting events, and live concerts. When an analog input signal is detected, the digital audio board shuts down. Stable High-Current Power Delivery Dynamic changes in music cause impedance to fluctuate, placing huge loads on the amp. If it can’t meet power demands, sound breaks up. Onkyo’s WRAT employs a high-output EI transformer, 10,000 µF customized audio capacitors, and a low-impedance drive. As well as achieving more involving and musical sound, low-negative-feedback amplifier circuits with discrete transistors deliver deep and punchy bass thanks to wide frequency response covering 10 Hz–100 kHz. Phase Matching Bass Boost Most pre-main amps have a loudness button designed to boost low-mid frequency sound. However, conventional designs are prone to phase-shift, which degrades the clarity of the vocal frequency band. Onkyo’s Phase Matching Bass Boost function eliminates phase-shift between low- and mid-range frequency bands above 300 Hz. Bass response is enhanced without compromising vocal clarity, and that’s something especially useful when playing music at low volume where bass and high-frequency sounds are more difficult to hear. Direct Mode Brings You Closer To The Source Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-path-lengths have been significantly reduced in comparison to the A-9030 for even more accurate and faithful sound. Enjoy end-to-end analog music reproduction from turntable to speakers, and recapture the atmosphere of the original recording with any connected source. Sounds Clearer At Low Volumes When playing music at low volume, the signal normally drops close to the component’s noise floor. The signal picks up noise, which is amplified, and the result is muffled sound. To avoid this, the A-9130 features Optimum Gain Volume Circuitry, which attenuates the signal by less than half the usual amount. The signal never approaches the noise floor so you can enjoy clearest sound at low volume. Thick And Rigid Chassis Tames Resonance Every hi-fi component generates electromechanical resonance. This vibration translates into signal noise, and that impacts on the sound coming out of your speakers. To combat the negative effects of vibration, the A-9130 features a rigid chassis that’s fabricated from 1.6 mm-thick steel. Working together with large, wide-spaced insulators, unwanted resonance is virtually eliminated. New Fine Display Shares Info Clearly A new display panel boasts fine text resolution, making it easier to read at a distance than single bulbs. It shows active selected input at a glance. Quality Speaker-Posts Make Perfect Contact Speaker cables with your choice of terminal are firmly secured by high-quality speaker binding posts. Each wide-spaced non-magnetic post prevents interference and features a large, easy-to-grip transparent knob. Power Output 60 W + 60 W (4 Ω, 20 Hz–20 kHz, 0.5% THD, 2-ch driven, IEC) Dynamic Power 260 W (3 Ω, Front) 220 W (4 Ω, Front) 130 W (8 Ω, Front) THD+N (Total Harmonic Distortion + Noise) 0.04% (8 Ω, 1 kHz, half power) Input Sensitivity and Impedance Line 200 mV/47 kΩ Phono MM 4 mV/47 kΩ (IHF-A) Rated RCA Output Level and Impedance 0.2 V/2.3 kΩ (Line Out) 1 V/ 500 Ω (Subwoofer Pre-Out) Phono Overload 70 mV (MM, 1 kHz, 0.5%) Frequency Response 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode) Tone Control ±10 dB, 100 Hz (Bass) ±10 dB, 10 kHz (Treble) Signal-To-Noise Ratio 106 dB (IHF-A, Line In, Speaker Out) 81 dB (IHF-A, Phono In, Speaker Out) Speaker Impedance 4–16 Ω General Power Supply AC 220–230 V, 50/60 Hz Power Consumption 150 W Standby Power Consumption 0.2 W No-Sound Power Consumption 18.3 W Dimension (W x H x D) 435 x 129 x 330 mm Weight 8.0 kg Carton Dimensions (W x H x D) 572 x 252 x 419 mm Weight 10.5 kg Supplied Accessories Instruction Manual, Remote Controller, AAA (R03) Batteries x 2*

This compact all-rounder relies on excellent sound quality and sufficient performance even for more demanding loudspeakers A fine sound quality that comes close to tube amplifiers and a high-quality phono input for your turntable are ideally combined. Despite the small size, 5 different source devices can be connected at the same time. The stereo box DS3 offers analog phono and line, as well as lossless aptX streaming via Bluetooth and of course remote control. Power output 55 watts @ 4 ohms (2 ohms last stable) Setup Double mono Inputs 3x analog, phono, Bluetooth Bluetooth 4th generation with antenna (aptX capable) Phono input Integrated MM & MC input Volume control Motor-operated potentiometer Headphone jack With its own amplifier stage Outputs Fixed & variable output for subwoofers or 2. Zone / final stage IR FB & integrated IR via Bluetooth function via app Housing Full metal housing with TPE damping feet Wooden side panels (optional) Available