Features: The 2M Bronze features a Nude Fine Line diamond, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps. 2M Bronze Technical data Output voltage at 1000 Hz, 5cm/sec. 5 mV Channel balance at 1 kHz 1 dB Channel separation at 1 kHz 26 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-29.000 Hz Frequency response 20-20.000 + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 22 µm/mN Stylus type Nude Fine Line Stylus tip radius r/R 8/40 µm Tracking force range 1.4-1.7g (14-17 mN) Tracking force, recommended 1.5 g (15 mN) Tracking angle 20° Internal impedance, DC resistance 1.2 kOhm Internal inductance 630 mH Recommended load resistance 47 kOhm Recommended load capacitance 150-300 pF Cartridge colour, body/stylus Black/Bronze Weight 7.2g Replacement stylus unit 2M Bronze Replacement stylus unit - 2M Bronze (interchangeable with 2M Black and 2M Black LVB 250) Stylus lifetime: with proper care we find that up to 1000 hours is possible without degradation of performance. 2M Series styli interchangeability: The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations: - 2M Red, 2M Blue and 2M Silver - 2M Bronze, 2M Black and 2m Black LVB 250 - 2M Mono and 2M 78 Compatibility with Rega brand TT/TA: REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Please read about cartridge set-up and alignment on tonearm on our FAQ. Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play. 3.2 - 4 mm spacers should be enough for 2M cartridge.

The Quintet Red is a perfect introduction to the world of Ortofon moving coils. It features an Elliptical diamond which is cut and polished to Ortofon’s standards. The MC Quintet Series is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. Since 1948 Ortofon has introduced about 100 different moving coil models, with their latest being the Quintet Series. Ortofons MC Quintet Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. It features an Elliptical diamond which is cut and polished to Ortofons highest standards. Nothing demonstrates Ortofon's long-standing resilience more than its commitment to the refinement of analogue sound quality and its continued development of new cartridge models. The MC Quintet Series is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. A special ABS (Acrylonitrile/Butadiene/Styrene) thermoplastic material is used for manufacturing of the body. This light-weight, impact resistant material is very suitable for injection-moulding and provides a very durable scratch resistant surface. Neodymium magnets are implemented to achieve an optimal output. Low internal impedance makes the cartridge less sensitive to load and therefore ensures compatibility with the widest range of preamps and transformers. Top-mounting of the Quintet cartridges is easy and secure using the screws supplied. The aluminuim frame has threaded mounting holes and is fitted easily with the 5mm or 7mm screws depending on the thickness of the headshell. The Quintet series’ right angles, straight lines, stylus visibility and ample distance between the record surface and the cartridge’s bottom will make it easy to mount and align the cartridge and tonearm correctly. All in all, the Quintet series from Ortofon gives out excellent results with mist common tonearms bringing many hours of new and surprising listeneing experiences to their precious vinyll collection. Output voltage at 1 kHz 5 cm/sec 0.5 mV Channel balance < 1.5 dB Channel separation at 1 kHz > 21 dB Channel separation at 15 kHz > 14 dB Frequency range at -3 dB 20 - 25.000Hz Frequency response 20-20.000 Hz +/-2.5 dB Tracking ability at 315 Hz at recommended tracking force *) 65 μm Compliance, dynamic, lateral 15 μm/mN Stylus type Elliptical Stylus tip radius r/R 8/18 μm Tracking force range 2.1-2.5 g (21-25 mN)Quintet SideRed02 Tracking force recommended 2.3 g (23 mN) Tracking angle 20º Internal impedance, DC resistance 7 Ohm Recommended load impedance >20 Ohm Cartridge body material ABS/Aluminium Coil wire material Copper Cartridge colour Red Cartridge weight 9 g

Ne postoji ni jedan kertridž koji bi se približio njegovom nasleđu. Ocenjen, recenziran i pohvaljen u mnogim publikacijama i od strane krajnjih korisnika, zarobio je srca i umove tehničkih stručnjaka i ljubitelja muzike. Ovo je kertridž sa kojim ćete dugo uživati. Denon Original MC stereo kertridž Superiorna stabilnost Dvoslojna konstrukcija cantilevera Vešanje o jednoj tački SPECIFIKACIJE • Izlazna snaga: 0.3 mV • Izlazna impedansa: 40 ohms • Igla: 16.5-mikronski obli vrh • Sila praćenja: 2.3 ~ 2.7 g • Usklađenost: 5 x 10-6 cm/dyne • Težina: 8.5 g

Igla + glava N-30 za L-90, L-175 i L-3807

Recommended for the following Ortofon Cartridges: OM 5E, OMP 5E, OMB 5E, OMT, 5E. Frequency range 20-25.000 Hz Frequency response 20-25.000 Hz Tracking ability at 315Hz at recommended tracking force 65 µm Compliance, dynamic, lateral 20 µm/mN Stylus type Elliptical Stylus tip radius r/R 8/18 µm Tracking force range 1,5-2,0g (15-20 mN) Tracking force, recommended 1,75 g (17,5 mN) Tracking angle 2º

Karakteristike proizvoda: - Bluetooth streaming na uređaj - Pojasni pogon sa dve brzine - Izlazna snaga od 2 X 30 V RMS - Uklanjanje magnetnog kertridža AT 3600 - Funkcija automatskog zaustavljanja - Poklopac protiv prašine - Anti skating Uz Lenco LS-500 imate sve što je potrebno za ponovno ispunjavanje prostora vašeg prostora toplim zvucima sa vaših omiljenih ploča. Ugrađena Bluetooth funkcija čini LS-500 pogodnim za strimovanje muzike. Bluetooth zvučnik LS-500 je lako povezati. LS-500 ima uklonjivi plastični poklopac za prašinu. ŠTA JE U KUTIJI: - Gramofon Lenco LS-500 - Kabl za napajanje - Prekrivač za prašinu Specifikacije BROJ LS-500OK GTIN / EAN NAVISION 8711902043218 GARANCIJA 24 meseca MERE ZA PROIZVOD 1: Gramofon VISINA PROIZVODA 1 12.50 cm ŠIRINA PROIZVODA 1 42.00 cm DUBINA PROIZVODA1 35.90 cm MERE ZA PROIZVOD 2: Zvučnik (1 kom) VISINA PROIZVODA 2 25.00 cm ŠIRINA PROIZVODAA 2 15.90 cm DUBINA PROIZVODA 2 15.80 cm BOJA PROIZVODA Orah MATERIJAL Aluminijum, metal, plastika, drvo ULAZNI NAPON GLAVNOG ADAPTERA 1 (V) 100-240 V ULAZNA FREKVENCIJA GLAVNOG ADAPTERA 1 50-60 Hz IZLAZNI NAPON GLAVNOG ADAPTERA 1 (V) 15.00 V IZLAZNA STRUJA GLAVNOG ADAPTERA 1 2.40 A IZLAZNA SNAGA GLAVNOG ADAPTERA 1 (W) 36.00 W PROSEČNA EFIKASNOST GLAVNOG ADAPTERA 1 (U %) 87.5800 EFIKASNOST GLAVNOG ADAPTERA LOW LOAD 1 (U %) 84.00 POTROŠNJA ENERGIJE GLAVNOG ADAPTERA (NO LOAD) 1 (W) 0.08 STANDBY SNAGA U W 1 0.10 W VREME PRELASKA NA ERP STATE 1 20 min SIGNAL ZVUKA Stereo 2.0 IZVORI AUDIO / VIDEO / PODATAKA Bluetooth, LP IZLAZ ZA POVEZIVANJE AUDIO / VIDEO PODATAKA/ RCA OUT, Speaker OUT TIP BLUETOOTH-A Receive BLUETOOTH VERZIJA 4.2 BLUETOOTH HANDSFREE No KOMERCIJALNI DOMET BLUETOOTH Do 10 m MATERIJAL SPOLJNIH ZVUČNIKA Drvo ANTI SKATING Da MP3 PRENOS Ne PRETPOJAČALO Može da se bira TIP GRAMOFONA Normalan GRAMOFON SA ZVUČNICIMA Da, spoljni zvučnici sa kablom TIP PICK-UP SISTEMA Pokretni magnet (MMC) TIP POGONA Pojasni pogon GRAMOFON SA BLUETOOTH-OM Da, stream na gramofon MATERIJAL TANJIRA Aluminijum BRZINA/BROJ OBRTAJA 33, 45 PODRŽANI TIPOVI PLOČA 7, 10, 12 UKLJUČENA GRAMOFONSKA OPREMA 45 TPM adapter, AC adapter, Anti-skating težina, AT3600, krpica za čišćenje, protivteg, poklopac protiv prašine, slip mat AUTOSTOP Da AUTORETURN Ne PITCH KONTROLA Ne MEHANIČKA RUČICA Da PODESIVI PRITISAK IGLE Da TEŽINA PROIZVODA (KG) 9.31 kg MALOPRODAJNO PAKOVANJE / VISINA JEDINICE (M) 0.39 m MALOPRODAJNO PAKOVANJE / ŠIRINA JEDINICE(M) 0.47 m MALOPRODAJNO PAKOVANJE / DUBINA JEDINICE (M) 0.41 m MALOPRODAJNO PAKOVANJE / BRUTO TEŽINA (KG) 10.96 kg RUČKA NE KOLICA NE UKUPNA IZLAZNA SNAGA (W) 2 x 30 Watt IMPEDANSA (OHM) (PRIMENJIVO SAMO KOD SPOLJNIH ZVUČNIKA) 4.00 ohm TOUCHSCREEN NE

Magneto A high-specification Dual Moving Magnet Phono Cartridge, Magneto has been designed and manufactured by Vertere Acoustics to their exacting standards, and delivers an unparalleled musical experience in its class. An ideal starter cartridge for new phonograph owners with a love of high-fidelity, Magneto is quiet, dynamic, accurate, easy to optimise, tolerant of records in less-than-perfect condition (which is often the case when owners return to vinyl after many years of absence), yet superbly musical, imbued with all the qualities one expects of Vertere products. The dual magnet layout replicates the structure of the cutter head, with a V-form twin-magnet design to mimic the left & right channel sides of the record groove. Permalloy centre shield plating provides a higher frequency response, with electrical crosstalk typically better than 40dB. Use of laminated para-toroidal coils, along with the aforementioned "V" geometry of the magnets also gives rise to higher efficiency in generating the output signal. Magneto utilises a finely-finished elliptical stylus to ensure outstanding tracking ability, plus super-quiet tracing of the record groove. Magneto is closely related to the Audio Technica VM520EB cartridge (originally fitted to the DG-1) and is stylus-compatible with the AT VM5x range. This allows Magneto owners to upgrade to an improved stylus profile – if desired – when the time comes to renew. Features Replaceable Stylus Integrated Stylus Guard Stainless Steel Fixing Bolts, Washer & Hex Thumb Nuts Easy Alignment-Assist Markings Specifications Frequency Response: 20 – 23,000Hz Channel Separation: 27dB (1kHz) Output Channel Balance: 1.5dB (1kHz) Output Voltage: 4.5mV (1kHz, 5cm/sec.) Vertical Tracking Angle: 23 ° Vertical Tracking Force Range: 1.8 – 2.2g (2.0g standard) Stylus Shape: Elliptical Bonded Stylus Size: 0.3 x 0.7 mil Stylus Construction: Bonded Round Shank Cantilever: Aluminium Tube Coil Impedance: 2,700 Ohm (1kHz) Static Compliance: 35 x 10-6 cm/dyne Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz) Recommended Load Impedance: 47,000 Ohm Recommended Load Capacitance: 100 – 200pF Weight: 6.4g Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm Weight 0.064 kg Dimensions 2.82 × 1.7 × 1.73 cm Colour Black / White / Orange

2M series uses Ortofons own technology, that allows to reach the same levels of flat frequency response as Moving Coil cartridges. 2M Silver combines these technologies with ultimate simple mounting procedure for nearly all available turntables. Due to MM principle, 2M cartridges are compatible with most phono preamplifiers. An absolutely feature unique in this price range, 2M-Silver uses internal silver plated copper coils, which guarantees outstanding sonic results! Moving Magnet principle Silver plated copper coils windings to achieve higher quality and more dynamic playback compared with conventional MM cartridges Suitable for low to medium tonearm masses 1/2 inch mounting standard High trackability 2M-Silver should be connected to phono MM inputs As with most MM cartridges, stylus may be exchanged Weight 7.2 g Stylus type elliptical Stylus tip radius 8 x 18 µm Frequency response 20 - 25.000 Hz Output voltage 5.5 mV Channel separation >25dB @ 1kHz Compliance dynamic/lateral 20/20 µm/mN Auflagekraftbereich 1.6-2,0 g Recommended tracking force 1.8 g Trackability (315 Hz, lateral) >70 µm Tracking angle 20° Internal inductance 700 mH Recommended load resistance 47 kΩ

Presenting the magnificent George Harrison 16LP box set, Paul Rigby undertakes a detailed sound test and talks to the mastering engineers behind it, Lurssen Mastering’s Gavin Lurssen and Reuben Cohen George Harrison’s two CD/SACD box sets, covering his solo discography, have been on the shelf for some time (they were released in 2004 and 2014, respectively). I wondered if we’d ever see a vinyl box set of the same and, if it did appear, whether it would follow a similar two part template. Just the one, it appears because UMC has now released a single 16LP vinyl box set, The George Harrison Vinyl Collection. With the albums also being made available as standalone releases, the collection has been pressed on 180gm vinyl mastered from the original analogue tapes and cut at Capitol studios. Buyers will notice immediately that the slipcase box features…movement. Via the lenticular cover, showing two faces of Harrison as he matured during his solo years. The full contents list for the set includes: Wonderwall Music (1968), Electronic Sound (1969), All Things Must Pass (1970), Living In The Material World (1973), Dark Horse (1974), Extra Texture (1975), Thirty Three & 1/3 (1976), George Harrison (1979), Somewhere In England (1981), Gone Troppo (1982), Cloud Nine (1987), Live In Japan (1992) and Brainwashed (2002). The set also includes two bonus 12” picture discs: When We Was Fab and Got My Mind Set On You, both from the 1987 album Cloud Nine. Before tackling the LPs, I was fortunate to chat with the two mastering engineers responsible for the sonic production of this new analogue set: the multi-award winning Gavin Lurssen and Reuben Cohen of Lurssen Mastering in the USA. Lurssen described how his company got involved with the project, “I had worked with Dhani Harrison. I’d met him on a Ben Harper project called Fistful of Mercy with Dhani and Joseph Arthur. Dhani lived in town. Everyone seems to know everybody else and, if they don’t, they know everyone through one degree of separation.” Friendship grew into trust and the invitation to work on this set. Paul Hicks (who began his career at Abbey Road) was the guy who handled the actual tape transfer. In this case, to 24bit/192kHz. Why 192kHz? Why not DSD for this George Harrison set? The Rolling Stones mono box set was processed using DSD files, for example, “When you go into proprietary formats,” said Lurssen, “it limits abilities. The PCM transfer adds flexibility to help future proofing. Everyone can play PCM. For an archival format – which is aimed at the future – PCM is something that can be read. We’ve never actually discussed that but I’m guessing that’s the reason.” So why not 384kHz then? “It’s got to do with what the gear’s capabilities are and the necessity regarding time,” said Lurssen. “Also, in my opinion, the ear’s hearing range is all achieved from 192kHz. With 192kHz, you’re gaining as much information as you can get. If you open the gates wider, the information coming in doesn’t increase, the gate is just a little wider. It’s not going to buy you anything else really. Also, some of the gear won’t work at that rate. Many people in the audio field believe that 96kHz is fine. Our feeling is that 192kHz is really where it should start.” Yet there are audiophile voices out there who would say that 192kHz doesn’t give you everything that vinyl can offer. Lurssen was ready for that one, “Every time you do anything, there is compromise. An actual recording. That in itself is a compromise. If I’m sitting in front of an orchestra…that is the purest form of intake. If I then record that orchestra under the very best of conditions and circumstances where even money is of absolutely no object, for later replication, it’s not going to be as good. It won’t be as good as actually sitting in front of that orchestra. Everything that you do that is other from sitting in front of that orchestra, is a compromise. To me, it’s a feel thing and at 192kHz, I feel fine. When I work at lower rates, I detect it.” Some vinyl fans shudder when the notion of any sort of digital is included within an analogue project but Lurssen believes that digital is a must and it’s here to stay, “The idea is to get the work done with the minimal carnage,” he said “When you work on these old and fragile tapes, some are brittle and if you make analogue tape copies then you’re picking up degradation. When you handle the tapes and you rewind back and forth and you’re EQing every track, you risk destroying the original tapes. Storing in the digital domain, it gives us the flexibility to really give the sonic treatment of the music into the exact place that we want it.” This means that the team could reach into a track pull out the information required, fix it and plug it back again. You can’t do that by mastering with analogue tape. That is, not to such detailed and exacting standards. There’s more to Lurssen’s mastering techniques than this though. Lurssen and Cohen went one step further than most mastering engineers, at least in my experience. What most mastering engineers do is to transfer a tape into digital, they edit it in the digital realm, then save it as digital and send that file to the cutting engineer. Lurssen didn’t do that. What the team did was to take an element of the music that required attention from the digital source and converted that back into analogue then brought it into their analogue console. You know the type, the old fashioned console with switches and knobs and sliders. This is where the work was done, in the analogue domain. Here, the engineers moved physical controls to do their editing. Once completed, that newly edited piece was converted from analogue to digital and saved. Now, you’re thinking, what is the point if it ends up as a digital file anyway? Well, apparently it does make a big difference in the final sound, retaining an analogue feel. This is why Lurssen end up with two sets of digital files: high-res pre-mastering and high-res post-mastered files.

Power Box S3 Phono is a very efficient and flexible power filter for your turntable and phono preamp. By placing the power supply outside of the main component, potential noise and audio signal contamination is avoided. Clean energy contributes significantly to the sound quality. Its two outputs are specifically engineered to power Pro-Ject turntables and phono preamps. The sophisticated DC filtration can have a dramatic impact on the sound quality. In addition to the sound improvements, Power Box S3 Phono also offers its users a cleaner cable solution avoiding PSU and cable mess. *ATTENTION: NOT SUITABLE for the following turntables: X8, Xtension 9, Xtension 10, Xtension 12, RPM 9, RPM 10, Signature 10, Signature 12. For these turntables we recommend the Power Box RS2 Phono or Power Box RS Uni TT. NEW all in one power supply for your phono setup NEW compatible with all 18V Phono Boxes NEW compatible with all 15V DC turntables* Ultra stable & clean power Low noise power output Linear voltage regulation Low ESR capacitors Rigid aluminium casing protects against interference Made in Europe Input power supply: 18V / 1000mA Output voltage/ripple: 1 x 15V ±0,5% Output voltage/ripple: 1 x 18V ± 0,5% Output current: both outputs combined max. 1000 mA Dimension (W x D x H): 103 x 37 x 106 mm Weight: 370g without power supply

Fits all brands and types of turntables and places your 7“ vinyls exactly centrally on the turntable. Adapt it is made from non-magnetic metal, that makes it look first-class. Unlike cheap plastic solutions the Adapt it is unbreakable! Features Adaptor for use with 7-inch single records Locates record centrally on turntable No plastic - precision CNC-machined Non-magnetic aluminum Suitable for all brands and types of record players Material Aluminum, CNC twisted Diameter 38 mm Height 10 mm

Nova, specijalna Walnut-effect finish serija, koja je napravljena od istog premijum laminata visoke čvrstine kao na standardnom mat P1 uređaju, predstavljena je tokom avgusta i septembra 2022. Dizajn je unapređen atraktivnom, visoko-kvalitetnom, sada standardnom finalnom obradom, u kombinaciji sa novim, zatamnjenim zaštitnim poklopcem. Glavne karakteristike Nova, Walnut-effect finalna obrada predstavljena 2022. EBLT napredni kaiš, od sada standardna opcija. Nova mat obrada dodata 2021. RB110 ručka sa ležajevima ultra niskog trenja. Fabrički ugrađen karbonski kertridž za magnetnu iglu. Fenolski tanjir sa plutajućim efektom. Visoko-kvalitetni, 24-Voltni sinhroni elektromotor niskog nivoa šuma. Doživotna garancija na proizvođački kvalitet. Ručka Potpuno nova patentirana RB110 ručka proizvedena sa novim Rega-designed ležajevima ultra-niskog nivoa trenja. Integrisani lock-nosač ručke. Automatski bias/podešavanje, Plug&Play. Elegantno, ergonomski dizajnirano kućište glave za lakše rukovanje. Kertridž Rega Carbon kertridž od sada standardno ugrađen. 24 V sinhroni ektromotor. Prvi entry-level gramofon koji koristi novi, sinhroni AC elektromotor sa štampanom pločom i aluminijumskim remenikom, što donosi izuzetno nizak nivo šuma i stabilniju brzinu. Osnova Novi Walnut-effect mat finish sa poboljšanim dizajnom i ergonomski pozicioniranim prekidačem sa donje strane. Ukupno 3 varijante izgleda osnove: mat crna, mat bela i Walnut-effect. Patentirano mesingano kućište centralnog ležaja je sada bolje uklopljeno tako da smanjuje pritisak na sam ležaj i minimizuje prenos potencijalne energije. Tanjir 23mm, povećane mase, od fenolske smole sa unapređenim ‘flywheel’ efektom za naprednu stabilnost brzine rotacije. Izolacija Najnoviji dizajn nožica za veću stabilnost i manji prenos vibracije. Ležište napajanja za elektromotor: Integrisani kuler. Balans teg 111-gramski balans teg. TEHNIČKE SPECIFIKACIJE Ručka: RB110, ručno sastavljena Kertridž: karbonski, fabrički ugrađen Elektromotor: 24V, sa niskim nivoom šuma. Tanjir: od Fenolske smole Dimenzije (sa zatvorenim poklopcem): 447x117x360mm (širina/visina/dubina) Težina: 4,2 kg

Za veću jačinu zvuka povežite spoljne zvučnike preko RCA priključka na zadnjoj strani gramofona. LS-10 takođe ima izlaz za slušalice, tako da možete slušati svoje ploče bez ometanja bilo koga drugog. LS-10 dolazi sa odvojivim poklopcem za prašinu koji štiti gramofon od prljanja. Uređaj možete lako održavati čistim pomoću meke i suve krpe. Udahnite novi život vašim starim vinilima! GARANCIJA 24 meseca VISINA 10.5 cm ŠIRINA 32.8 cm DUBINA 31.5 cm BOJA Crna MATERIJAL Plastika, drvo VREME PRELASKA NA ERP STATE 15 min SIGNAL ZVUKA / broj audio kanala Stereo 2.0 IZVORI AUDIO / VIDEO / PODATAKA LP & singl ploče A/V izlazi RCA Out, 3.5mm-ski izlaz za slušalice MP3 prenos Ne ANTI SKATING Ne GRAMOFON SA ZVUČNICIMA Da (ugrađenim) PRETPOJAČALO Da TIP POGONA Remenski (kaiš) TIP PICK-UP SISTEMA Keramički UKLJUČENA GRAMOFONSKA OPREMA 45 RPM (7”) adapter, AC adapter, krpica za čišćenje, poklopac protiv prašine, slip mat MATERIJAL tanjira Plastika Bluetooth Ne BRZINA/BROJ OBRTAJA 33, 45 PODRŽANI TIPOVI PLOČA 7”, 10”, 12” PODESIVI PRITISAK IGLE Ne AUTOSTOP Da AUTORETURN Ne “PITCH” kontrola Ne Mehaničko podizanje ručice Da TEŽINA PROIZVODA (KG) 2.29 kg Ulazna snaga 100-240 V Frekvencija 50-60 Hz MAINS ADAPTER OUTPUT VOLTAGE 5 V MAINS ADAPTER OUTPUT CURRENT 1 A MAINS ADAPTER OUTPUT POWER 5 W MAX. izlazna snaga 2 x 3 W

Čelični tanjir/nosač sa anti-rezonantnim podtanjirom pokreće motor na remenski pogon, smešten u solidan okvir od medijapana. Lagana aluminijumska ručka niskog trenja od 8.6“ (22 cm dužine) Potpuno novi dizajn glave, od polimera ojačanog ugljeničnim vlaknima, čini je super stabilnom i čvrstom, ali i dalje dovoljno lakom – za savršeno uklapanje sa ultra-laganom ručkom od aluminijuma. Na ručki je fabrički postavljen kvalitetan stereo MM kertridž, Ortofon OM5e. Poklopac za zaštitu od prašine uključen je u pakovanje, kao i slip (felt) mat za zaštitu vaših ploča. Vrhunski PHONO RCA kablovi takođe dolaze u paketu. Boja: Bela Princip rada: Remenski pogon (na kaiš); Brzine rada (obrtaja): 33.3 / 45 RPM, elektronski prekidač Tanjir/nosač: Masivni čelik; Materijal glavnog ležaja motora - nerđajući čelik u bronzanoj čauri Varijabilnost brzine: na 33 obrtaja ±0.7 %, na 45 obrtaja ±0.6 %; Wow & flutter 33: ±0.25% 45: ±0.23% Signal-to-Noise: 65dB; Audio I/O : 1 x dvokanalni RCA izlaz Ručka: 8.6" / 218.5 mm AC/DC: 15 V DC / 0.8 A napajanje; 110 ili 230 V - 50 ili 60 Hz, Potrošnja el. energije: 4.5 W (Max) Dimenzije: 420 x 112 x 330 mm, Težina: 3.5 kg

The T1 record player boasts premium materials, stylish aesthetics, a rich, lively sound and an accessible price. It can also be accommodated into almost any environment thanks to its multiple finish options and three output versions. The T1 is based around a stylish CNC-machined plinth featuring no plastic parts and carefully manufactured to ensure there are no hollow spaces inside, avoiding unwanted vibrations within the finished product. Mounted inside the plinth is a precision belt drive system, attached to a newly designed sub-platter, which itself is engineered to the finest tolerances for stable mounting into the stainless-steel axle/brass-bushing main bearing – the same bearing featured on the multi-award winning Essential III turntable. The sub-platter drives the new heavy, zero-resonance glass platter with absolute stability, ensuring an ideal playback surface for vinyl records. The tonearm on the T1 is a new 8.6” model featuring a larger one-piece aluminium tube and an improved gimble bearing assembly with low-friction components for absolute accuracy in use. Mounted with an Ortofon OM 5E cartridge with elliptical diamond stylus for great sound, the tonearm is also pre-set for downforce and anti-skate settings, so there’s no need for any complicated set-up; you can get playing straight out of the box! T1 Phono SB Built-in phono stage Push-button speed change Detachable RCA leads Phono or Line level output Premium plug-and-play turntable Luxury design elements throughout for true hi-fi sound Anti-resonant sub-platter design Heavy 8mm, zero-resonance blasted glass platter CNC machined plinth in three stylish finishes No plastic parts where there shouldn't be Ortofon OM 5E cartridge with elliptical diamond stylus pre-installed True hi-fi tonearm pre-set for downforce and anti-skate Supplied with semi-symmetrical, low-capacitance Connect-IT E RCA phono cables Supplied with detachable dust cover with adjustable hinges Made in Europe Speed: 33 / 45 RPM speed change Principle: Belt drive Speed Variance: 33: 0.70% 45: 0.60% Wow & Flutter: 33: 0.25% 45: 0.23% Platter: Heavy 8mm, blasted-glass platter with felt mat Main Bearing: Stainless steel/brass Signal to noise: 65dB Tonearm: 8.6" aluminium Effective arm length: 218.5 mm Overhang: 18.0 mm Effective Tonearm Mass: 8.0g Counterweight for mass: 5 - 10g (pre-mounted) Tracking Force Range: 0 - 50mN (pre-set to 17.5mN for OM 5E) Output: T1 Phono SB: Switchable phono/line level, RCA leads Included Accessories: Dustcover, feltmat Power Supply: T1 Phono SB: Detacahable power supply Power Consumption: 3W Max Dimensions (W x H x D): 415 x 100 x 335 mm Weight: 3.8kg (net)

Rega Strobe Kit će proceniti brzinu bilo kog gramofona. Strobe Kit generiše 100 Hz pulsnog svetla za korišćenje zajedno sa stroboskopskim 180-linijskim diskom. Sve što treba da uradite je da postavite stroboskopski disk direktno na gramofonsku podlogu. Pokretanje plejera na 33 1/3 RPM, jednostavno držite strobe LED direktno iznad linija da biste precizno procenili brzinu vašeg gramofona. Da biste izmerili brzinu gramofona, jednostavno držite stroboskop pribl. 2-3 cm udaljeni od linija na stroboskopskom disku. Ako se linije zaustave, ostajući stabilne, gramofon radi pravilnom brzinom. Međutim, ako se linije na disku kreću sporo u smeru kazaljke na satu, to znači da gramofon radi brzo. Ako se linije kreću polako u smeru suprotnom od kazaljke na satu, to znači da gramofon radi presporo. Preporučuje se da držite referentnu tačku (kao što je vrh olovke) blizu linija stroboskopskog diska. Ovo će vam omogućiti da lako prepoznate da li su linije stabilne ili se rotiraju. Ako su vaš gramofon ili napajanje podesivi, možete korigovati brzinu vašeg gramofona sve dok ne počne da radi pravilnom brzinom i dok linije ne budu stabilne. Tačan merač brzine gramofona Generiše 100 Hz pulsnog svetla Stroboskopski disk u paketu Radi sa bilo kojim gramofonom Jednostavan za upotrebu

Low Mass Pocan® Body The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms. High Efficiency Magnetic Circuit Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response. Reduced Moving Mass The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics. Expert Adjustment The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image. Frequency Response 20Hz - 20kHz ±3 dB Channel Balance within 2 dB @ 1 kHz Channel Separation better than 25 dB @ 1 kHz Sensitivity 6.5 mV ±1.5dB, 1kHz @ 5 cm/sec Static Compliance 20 mm/N Dynamic Compliance @ 10 Hz 10 mm/N Equivalent tip mass 0.45 mg Vertical Tracking Angle 24° Stylus Radius Vital PH Stylus Type Replaceable Load Resistance 47 kΩ Load Capacitance 150 - 200 pF Internal Inductance 570 mH Internal Resistance 660 Ω Cartridge Mass 6.3 g Cartridge Mass (inc. fixings) 7.6 g Fixing Centre 0.5" (12.7 mm) Playing Weight 1.5 - 2.0 g (1.7g nom.) Replacement Stylus 1022GX - D22GX

Magnetic Duplex Technology™ All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage. Expert Adjustment The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product. Stylus/Cantilever Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove. Colour Violet Cantilever Aluminium Stylus profile Elliptical Stylus radius 0.3 x 0.7 mil Frequency range 20 Hz - 20 kHz Channel balance 1.5 dB at 1 kHz Channel separation >20 dB at 1 kHz Sensitivity 3.5 mV (1 kHz @ 5 cm/sec) Static compliance 20 mm/N Vertical tracking angle 20° Load resistance 47 kΩ Load capacitance 100 - 200 pF Internal inductance 400 mH Internal resistance 410 Ω Cartridge mass 6.9 g Fixing centres 12.7 mm (0.5 in) Playing weight 1.5 g - 2.5 g (2.0 g recommended)

As a manufacturer, Rega is always looking at ways to reduce waste and avoid parts going to landfill. They are proud of the fact that they have employed a team of people (for many years) dedicated purely to reworking or recycling damaged parts. Unfortunately, there are always some parts that may have cosmetic issues deemed not acceptable ‘in their industry’ for use in an ‘A’ grade product. In some cases, it is not always economical to rework them, and such items are sadly destined for landfill. This is always the very last resort but as a responsible company Rega feel that we can no longer accept this as a viable option. Attitudes to waste are changing, for many years, imperfect fruit and vegetables were discarded and deemed not fit for sale simply due to appearance. However, the popularity of such goods rebranded in the UK as “wonky fruit” has seen a vast increase in sales over recent years as consumers become more educated and aware of how important avoiding unnecessary waste is. Rega now works with 650 suppliers, (85% of which are based in the UK) and all have a responsibility to supplythem quality parts. However, either due to poor packing, mishandling or transport some items may become damaged. These parts would often be classed as unrecoverable by Rega's rework team. This is where Rega Green Grade comes in. Instead of not using parts with cosmetic faults Rega have decided to use such parts to build Green Grade Rega products. These products will function and perform perfectly and come with their unrivalled Limited Lifetime Warranty against manufacturing defects. In an ideal world, all consumers would accept Green Grade and we would stop wasting valuable resources and reduce our carbon footprint. But for now, Rega hope these small steps will change people’s attitudes and deliver us all a better and less wasteful future. Remember, the only compromise is appearance never performance, and when you are listening to your music on a Rega Green grade product you can be safe in the knowledge you are helping our planet in the process. For Rega this is a non profit initiative designed to use parts and save them from being disposed off "How will this work?" - The first GREEN GRADE initiative will be the 'Planar 1 ECO DECK' here is how it will work: • Rega have a selection of Planar 1 and Planar 1 Plus plinths that are marked, scratched or obsolete (gloss P1 and P1 Plus for example). • Rega have a selection of marked or scratched P2 and P3 high gloss acrylic plinths that will also be built as Planar 1. (We will fit the appropriate brass bearing at no extra cost for those using P3 plinths). • Other green Grade components will be used as and when available such as platters and tonearms with cosmetic faults. • All will be fitted with ‘A’ grade Carbon cartridges. • The Plinths for the ECO DECKS will NOT be silk screened with a P1 logo so they can be easily identified as Green Grade • Each ECO DECK will be fitted with a Rega ECO lid badge. • Each ECO DECK outer carton will have a sticker with the Rega Green Grade logo for easy identification. • Every deck will be thoroughly tested and will have to pass all of the stringent tests that an 'A' grade Planar 1 would need to pass. • Performance is not affected in any way. • Lifetime Warranty is included against functional defects, but this will NOT cover cosmetics. This multi-award winning ‘Plug and Play’ design utilises our handmade RB110 tonearm, with pre-set bias and a factory fitted Carbon cartridge. Set-up is possible in under 30 seconds and delivers incredible performance well beyond its price point. PERFORMANCE BEYOND PRICE A fresh new look for the multi-award winning Planar 1. We are delighted to introduce the new matt finish Planar 1. Every single aspect of the Planar 1 has been meticulously designed to improve performance. The Planar 1 uses a bespoke 24 V, low noise, synchronous motor to reduce vibration combined with our hand made RB110 tonearm fitted with our unique Rega designed ultra-low friction bearings. We have added our latest drive belt technology the EBLT belt which delivers greater accuracy and improved speed performance. If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further. TONEARM Brand new RB110 tonearm built with the new Rega designed, bespoke, ultra-low friction bearings (patent pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘plug & play’ turntable we have ever manufactured. Ergonomically, designed headshell for improved usability and appearance. KEY FEATURES Integrated MM phono stage RB110 tonearm with ultra-low friction play bearings Factory fitted Carbon moving magnet cartridge EBLT advanced drive belt Phenolic resin, flywheel effect platter High quality, 24 V low noise synchronous motor Lifetime warranty against manufacture defects Green Grade components will be used as and when available such as platters and tonearms with cosmetic faults. All will be fitted with ‘A’ grade Carbon cartridges. The Plinths for the ECO DECKS will NOT be silk screened with a P1 logo so they can be easily identified as Green Grade Each ECO deck will be fitted with a Rega ECO lid badge. Each ECO Deck outer carton will have a sticker with the Rega Green Grade logo (attached) for easy identification. Every deck will be thoroughly tested and will have to pass all of the stringent tests that an ‘A’ grade Planar 1 would need to pass. Performance is not affected in any way.

The adjustable speed allows you to choose between 33 and 45 RPM which makes it easy to play your precious LPs and single records. Key Product features: Bluetooth® streaming to the device Belt drive with two speeds Output power of 2 x 30 W RMS Moving magnetic cartridge AT 3600 Dust cover Anti-skating With the Lenco LS-480WD you have everything you need to reminisce in the warm sound of your favourite records. The LS-480WD hides the latest technology in a classic design. The built-in Bluetooth® function makes the LS-480WD suitable for streaming music. What's in the box? Record player with 2 loudspeakers Dust cap Mains adapter Counterweight Anti-skating weight Slip mat 45 TPM adapter Drive belt Loudspeaker cable 2x Bracket spanner Adjustment board for element Dust cap base 2x Manual NL / EN / DE / FR / ES ITEM NUMBER LS-480WD GTIN / EAN CODE 8711902073222 CERTIFICATION CE MEASUREMENTS FOR PRODUCT 1: Turntable PRODUCT HEIGHT 1 12.50 centimeter PRODUCT WIDTH 1 42.00 centimeter PRODUCT DEPTH 1 35.90 centimeter MEASUREMENTS FOR PRODUCT 2: Speaker (1 piece) PRODUCT HEIGHT 2 25.00 centimeter PRODUCT WIDTH 2 15.90 centimeter PRODUCT DEPTH 2 15.80 centimeter COLOUR PRODUCT Wood MATERIAL Aluminium, Metal, Plastic, Wood MAINS ADAPTER INPUT VOLTAGE 1 (V) 100-240 V MAINS ADAPTER INPUT FREQUENCY 1 50-60 Hz MAINS ADAPTER OUTPUT VOLTAGE 1 (V) 15.00 volt MAINS ADAPTER OUTPUT CURRENT 1 2.40 ampere MAINS ADAPTER OUTPUT POWER 1 (W) 36.00 watt MAINS ADAPTER NO LOAD ENERGY CONSUMPTION 1 (W) 0.08 watt STANDBY POWER IN WATTS 1 0.10 watt TIME PERIOD SWITCH TO ERP STATE 1 20 min NUMBER OF AUDIO CHANNELS Stereo 2.0 NUMBER OF EXTERNAL SPEAKERS 2 TOTAL OUTPUT POWER (W) 60.00 watt AUDIO / VIDEO / DATA CONNECTIONS OUTPUT RCA OUT, Speaker OUT AUDIO / VIDEO / DATA SOURCES Bluetooth, LP BATTERY STATUS INDICATOR No BLUETOOTH® TYPE Receive BLUETOOTH® COMMERCIAL RANGE Up to 10 metres BLUETOOTH® VERSION 4.2 BLUETOOTH HANDSFREE No FM No DAB No DAB+ No INTERNET RADIO No MATERIAL EXTERNAL SPEAKERS Wood ANTI SKATING Yes TURNTABLE TYPE Normal TURNTABLE WITH BLUETOOTH® Yes, stream to turntable MP3 ENCODING No MECHANIC ARMLIFT Yes NEEDLE PRESSURE ADJUSTABLE Yes PITCH CONTROL No TURNTABLE DRIVE TYPE Belt drive AUTOSTOP No AUTORETURN No WARRANTY 24 months PRODUCT WEIGHT (KG) 9.57 kilogram RETAIL PACKAGING / SALES UNIT HEIGHT (M) 0.40 meter RETAIL PACKAGING / SALES UNIT WIDTH (M) 0.47 meter RETAIL PACKAGING / SALES UNIT DEPTH (M) 0.41 meter RETAIL PACKAGING / SALES UNIT GROSS WEIGHT (KG) 11.40 kilogram HANDLE No TROLLEY No IMPEDANCE EXTERNAL SPEAKER (OHM) 4.00 ohm TOUCHSCREEN No TURNTABLE RPM SPEED 33, 45 SUPPORTED RECORD TYPES 7, 10, 12 PICK-UP SYSTEM TYPE Moving magnet (MMC) PLATTER MATERIAL Aluminium PRE AMPLIFIER Selectable TURNTABLE WITH SPEAKER(S) Yes, external wired speakers ACCESSORIES TURNTABLES INCLUDED 45 TPM adaptor, AC adaptor, Anti-skating weight, AT3600, Cleaning cloth, Counterweight, Dust cover, Slip mat

Included is an analogue to digital conversion system, with a USB connection easily archive your precious vinyl to your computer using the USB port on the back of the turntable. The LBT-225 has a glass turntable platter, belt drive, RCA connection and a carbon fiber arm with a counterweight. The Audio-Technica cartridge AT-VM95E provides a warm sound and a Hifi quality to your precious records. The plastic cover ensures that your turntable does not disappear under a layer of dust and protects it from any outside damage. The turntable comes complete with CE-UK multi-plug and AC power supply adapter. The Lenco LBT-225 is available in a dark walnut wood color. What's in the box? Turntable Mat Adapter Adapter UK plug USB cable RCA cable 45 RPM adapter Counterweight Anti-skating weight Cartridge AT-VM95E Belt Belt mounting wrench Dust cover Extra dust cover foot 2x Manual NL/EN/DE/FR/ES Quick start guide Adjustment card for cartridge COLOUR PRODUCT Walnut MATERIAL Aluminium, Glass, Wood NUMBER OF AUDIO CHANNELS Stereo 2.0 AUDIO / VIDEO / DATA CONNECTIONS OUTPUT RCA OUT, USB-B PC encoding 1x AUDIO / VIDEO / DATA SOURCES LP BLUETOOTH® TYPE Send BLUETOOTH® COMMERCIAL RANGE Up to 10 metres BLUETOOTH® VERSION 5.2 BLUETOOTH HANDSFREE No FM No DAB No DAB+ No INTERNET RADIO No ANTI SKATING Yes, adjustable TURNTABLE TYPE Standing TURNTABLE WITH BLUETOOTH® Yes, streaming to external sound carrier MP3 ENCODING Yes, via PC MECHANIC ARMLIFT Yes NEEDLE PRESSURE ADJUSTABLE Yes PITCH CONTROL No TURNTABLE DRIVE TYPE Belt drive AUTOSTOP No AUTORETURN No WARRANTY 24 months PRODUCT WEIGHT (KG) 6.64 kilogram RETAIL PACKAGING / SALES UNIT HEIGHT (M) 0.42 meter RETAIL PACKAGING / SALES UNIT WIDTH (M) 0.52 meter RETAIL PACKAGING / SALES UNIT DEPTH (M) 0.22 meter RETAIL PACKAGING / SALES UNIT GROSS WEIGHT (KG) 8.11 kilogram HANDLE No TROLLEY No TOUCHSCREEN No TURNTABLE RPM SPEED 33, 45 SUPPORTED RECORD TYPES 7, 10, 12 PICK-UP SYSTEM TYPE Moving magnet (MMC) PLATTER MATERIAL Glass PRE AMPLIFIER Selectable TURNTABLE WITH SPEAKER(S) No ACCESSORIES TURNTABLES INCLUDED 45 TPM adaptor, AC adaptor, Anti-skating weight, AT-VM95E, Counterweight, Dust cover, RCA cable, Slip mat, Software CD, USB cable

The new EVO tonearm uses an inverted cardanic ABEC 7 quality bearing with 4 stainless steel tips. This bearing type is very stable and low friction, which guarantees a clear tracking. This results in a detailed and open sound stage. All the microinformation from the groove is preserved. The bearing sits in a an full aluminium housing, which provides the needed stability. For the EVO AS tonearm, we use a special aluminium s-shape tube with the highest internal damping, paired with a SME headshell. The s-shaped tonearm is not only an eye-catcher on every turntable, it also brings technical advantages. The arm benefits from much less groove angle distortion and an excellent tracking ability. The SME headshell allows you to quickly change your cartridges. We also offer headshells made of different materials to find the perfect fit for your cartridge. The arm tube is fixed by a single screw to allow rotation for an easy azimuth adjustment. The tonearm height can be continuously adjusted by loosening the two grub screws. It gives you the option of adapting the tonearm to height changes to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges Features Flexible high-purity copper inner wiring Aluminium tonearm tube with SME headshell Aluminium bearing block Ultra-low friction 4 pin point cardanic tonearm bearing TPE damped counterweight prevents resonances Accurate azimuth and VTA adjustment Outside ring is open to prevent bell-mode resonances Silicone-damped armlift can be adjusted to suit arm height Gold plated 5PIN DIN output socket Shiny aluminium parts polished by hand Available as AS Black & AS HG version in 9, 10, 12 inch Made in Europe Effective tonearm lenght: 304,8 mm (12"), 254 mm (10"), 230 mm (9") Mounting distance: 291,6 mm (12"), 238 mm (10"), 212 mm (9") Offset angle: 18° (12"), 21,4° (10"), 24° (9") Overhang: 13,2 mm (12"), 16 mm (10"), 18 mm (9") Pitch of mounting grooves in headshell: 12,7 mm (12"), 12,7 mm (10"), 12,7 mm (9") Effective tonearm mass with / without headshell: 28,1 / 14,5 g (12"), 25 / 11,7 g (10"), 24,2 / 10,6 g (9") Cartridge weight: 7-22 g (12"), 6,5-18 g (10"), 6,5-16 g (9") The range of the tracking force: 0 - 3 g (12"), 0 - 3 g (10"), 0 - 3 g (9") The minimal null point: 125 mm (12"), 126,8 mm (10"), 130,6 mm (9") The maximal null point: 251,7 mm (12"), 248,2 mm (10"), 243,7 mm (9") Tonearm weight (without flange): 311g (12"), 305g (10"), 303g (9")

Sabre MM Sabre is the new high-end moving-magnet (MM) phono cartridge from Vertere Acoustics, sitting between the cheaper Magneto MM cartridge and the beautiful and award-winning Mystic MC cartridge – all available from Unilet Sound & Vision. Upgrading from a budget moving magnet cartridge involves some difficult choices. The first and probably the most obvious choice is Moving Magnet or Moving Coil. Moving Coil is traditionally seen as the better choice, but it requires an additional 20 db or more gain. Budget phono stages often struggle to do this well, if at all. The upgrade involving a new cartridge and a new MC phono stage could be expensive. MM cartridges have in some ways suffered from the majority having a reputation of being a bit lightweight and scratchy-sounding. Sabre is not such a cartridge as a demonstration will conclude. Sabre is detailed, dynamic and full-bodied and, most importantly, is highly musical and addictive. Sabre’s body is precision machined from solid aluminium alloy with its final mass perfectly tuned to the generator for ideal support and control of unwanted mechanical vibrations. In turn, the generator is uniquely fixed to the body via four spike screws that are precisely positioned and torqued for maximum rigidity and performance. Cartridge mounting is via two machined threaded fixing holes. Also supplied with the cartridge are two Vertere stainless steel thumb screws designed to ensure correct coupling of the cartridge body to the tonearm head-shell. Features Aluminium alloy body, CNC precision machined from solid. The body is mass-tuned to the generator for optimum support and control of unwanted mechanical vibrations. Sabre MM utilises an Alnico magnet with its suspension individually positioned and aligned for maximum musical performance. Generator is uniquely fixed to the body via four "spike" screws precisely positioned and torqued for maximum rigidity and performance. No adhesives used in mounting the generator to the cartridge body. The micro-elliptical diamond stylus tip is bonded to an aluminium tube cantilever designed for maximum tracking ability without compromising high-frequency response or increased surface noise. Threaded body to accept the supplied stainless steel thumbscrews for correct coupling of the cartridge body to the tonearm headshell. Three specifically designed contact areas machined into the top of the body that provide the exact mechanical coupling required. Alignment ridge on the front top that assists mounting Sabre to any Vertere Acoustics tonearm. Bonded through diamond assembly maximises alignment and rigidity. Wideband frequency response of below 15 Hz to above 25 kHz. Output of 4.0 mV will provide a lifelike dynamic range with depth and precision. Specifications Type: Moving Magnet Output Level: 4.0 mV Recommended Phono Input Load: 47 kΩ, 100 pF – 220 pF Recommended Tracking Weight: 2.0 g (1.9 g – 2.1 g) Stylus: Elliptical Diamond 7.5 x 15.5 μm Mounting: Special Tri-Point Contact, with M2.5 Threaded Fixing Holes Generator Fixing: Special Quad-Point Contact, with M2.5 Stainless Spike Screws Frequency Response: 15 Hz -25 kHz Channel Separation: Better than 22 dB Cantilever: Aluminium Alloy Tube Dynamic Compliance: 10 x 10-6 cm/dyne Coil Impedance: 1 kΩ (per Channel) Weight: 10.3 g Weight 0.0103 kg Dimensions 2.82 × 1.7 × 1.73 cm Colour Vertere Orange

Features Upgrade for your SME headshell Spring connector technology Easy installation - perfect contact High purity 99,999% OFC copper leads 7 x 0,1mm core strand construction Gold plated beryllium copper connectors Colour coded cables Conductor Material 99,999% OFC copper Connnector Gold plated beryllium copper Length 50mm Weight 1,5g