A good amplified harp sound depends on the amp and microphone as well as the player‘s technique. The HOHNER Blues Blaster is a remake of the legendary Astatic JT-30 with a crystal element to get that fat electric Chicago harp sound. Features Generating Element: CrystalPolar Pattern: Omni-directionalFrequency Response: 30 - 10.000 HzOutput Level @ 1000Hz: -49dB (3.6 mv) (OdB = 1 volt/microbar)Impedance: High (recommended load 500K minimum)Dimentions: 78.6 mm long 58.7 mm diameterWeight: 283.5 grams (10 oz)Housing: Die-cast zinc alloyFinish: Extremely durable, baked acrylic enamel; Chrome plated grillVolume Control: 0.5 watt, thick film, conductive plastic potentiometer. Low noise close linearity and long rotational life.

Višenamenski AT2050 mikrofon poseduje uvek odličan zvuk, u bilo kojoj od konfiguracija krivulja koje možete izabrati - kardioidnoj, omnidirekcionoj i “osmici”. Njegove velike duple membrane su pozlačene i ostarene kako bi se postigao optimum karakteristika tokom godina upotrebe. Poseduje i 80 Hz high-pass filter, pa je idealan i za studio i za uživo pevanje, instrumente, klavir, žičane instrumente, bubnjeve, overhead, gitare itd. Tri krivulje koje se mogu birati : omni, kardioidna, osmica Mogućnost uključivanja 80 Hz high-pass filtera Velika membrana omogućuje fini, prirodni zvuk i nizak nivo šuma Vrhunska elektronika mu omogućuje da je u skladu sa vrhunskim Audio-Technica standardima doslednosti i pouzdanosti Dolazi sa shock mountom i zaštitnom vrećicom Element: Externally-polarized (DC bias) condenser Frequency Response: 20-20,000 Hz Low Frequency Roll Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: 42 dB (7.9 mV) re 1V at 1 Pa Impedance: 120 ohms Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) Dynamic Range: 132 dB, 1 kHz at Max SPL Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 4.7 mA typical Weight: 412 g (14.5 oz) Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch