iROLLER encompasses everything you need get the most of a street performance. On the road, on the tube, in a park, in the wild nature and wherever your passion takes you. This battery-powered speaker allows performers to instantly connect microphone, instrument, or simply play background music thanks to the integrated mp3 reader or via Bluetooth®. Also, the PA can be fully controlled from a distance thanks to its remote control. Street artists, buskers, urban dancers: iROLLER is just your perfect sidekick. iROLLER 10 is equipped with an integrated 3-channel mixer with microphone, Line, RCA and mini-jack inputs. Plus, the system features an on-board MP3 reader, USB port and SD Slot. It can receive audio via Bluetooth® virtually from any portable device too. The whole PA system can be managed at a distance thanks to the remote control. Perform anytime& anywhere with long-lasting battery and remote control Connect any portable device via Bluetooth® Integrated MP3 player with USB port/SD Card Slot On board 3-channel mixer with independent level controls

Serija Drive ima najveći raspon aktivnih i pasivnih zvučničkih kutija, od 10" do 15" i odgovarajući 15" Sub. Nudeći do 1200W snage za određene modele, specifikacija i kvalitet ovih injekcionih zvučnika postavljaju ovu seriju u prvi red za pristupačne, robusne i odlične zvučnike. Postoji ukupno 13 modela, 3x10", 4x12", 4x15" i 2x15" Sub. Aktivan i pasivan, sa ili bez Bluetooth i MP3 medijskih stanica i konačno sa DSP izborom. Mogućnosti su beskonačne. Aktivni modeli imaju 3-pojasni EQ, mikrofon/linijske ulazne konekcije na XLR i Jack, kontrolu pojačanja i nivoa i mogućnost povezivanja više zvučnika iz jednog izvora signala. Nova pojačala klase D u ovim modelima dizajnirana su da isporučuju veliku snagu i čist zvuk na svim nivoima snage. Svi modeli imaju odličan visokokvalitetni kabinet, sa dodatnim prednostima povezivanja polova zvučnika od 35 mm, višestrukim M10 tačkama i velikim ručkama za nošenje. Features 15″ two way active full range cabinet 310 watts (RMS) Bluetooth playback USB/SD card player, SD card recording High quality durable injection moulded cabinet Class D amplification Lightweight, high powered components 3 band EQ Specification Format: 15″ two way active full range cabinet Frequency response (-10dB): 45Hz – 20kHz Input sensitivity (Line): 0dBu Input sensitivity (Mic): -36dBu Max SPL: 127dB Amp Power: 620W(PGM), 310W(RMS) / 250W(LF) + 60(HF) LF: 15″ woofer / 50mm voice coil HF: 34mm compression driver / 1.5″ throat Coverage (HxV): 80° x 40° Crossover: 2.0kHz Input Connection: Jack/XLR Power voltage: 115V / 230V Hanging system: 5x M10 hanging points Dimension W*H*D: 450 x 710 x 370 (mm) Weight: 22KG

ll-in-One Portable PA System with Full Bluetooth Connectivity Use the extremely lightweight,yet powerful EUROPORT MPA40BT PA system to stream songs from your Bluetooth-enabled iOS device at the next company picnic,or to get your message across on the playing field. With its 40-Watt amplifier and premium 2-way speaker system,the iP40 provides superb sound—and the rechargeable battery lasts up to 12 hours. Add one or two of our ULM digital microphones, and you’ve got a supremely easy-to-use wireless,go-anywhere sound system on wheels! Bluetooth Ready The days of tape decks, CD players and even MP3 devices are long gone. Now your music lives on your phone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. Now with a simple wave of your hand,you can stream music from any Bluetooth audio-equipped device such as your iPad, iPod touch, iPhone, even your laptop computer. Now, isn’t that easy? Built-in Mixer & Wireless Option Both models feature built-in 2-channel mixers with the same ultra-low noise,high-headroom mic preamps that have made BEHRINGER mixers legendary.Also included is 2-band equalizer,plus Bluetooth for streaming audio directly from your iOS device, and our proprietary ULM wireless technology.Sold separately, BEHRINGER ULM Series digital mics integrate seamlessly to expand your MPA40BT/MPA40BT PRO system to handle virtually any live sound application. Whether you set your MPA40BT/MPA40BT speakers on a table, or mount them on optional speaker stands, you’ll enjoy music streaming through this rich sounding, easy-to-setup system in mere moments. Product Features: All-in-one portable PA system with full Bluetooth connectivity Incredibly simple to set-up and use - no technical background required 40 Watts of powerful, high-quality sound for audiences of up to 250 people Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc. Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth High-quality dynamic microphone with cable included “Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included) AC & battery operated with up to 12 hours continuous use per battery charge 2 microphone inputs with individual volume control Additional Aux input to connect to your CD player Effective and extremely musical 2-band EQ for perfect sound tuning Powerful 8" woofer and high-resolution tweeter driven by a Class-D amplifier Integrated stand mounting with 35 mm pole socket "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

All-in-One Portable 40-Watt PA System with Bluetooth Connectivity, Battery Operation and Transport Handle Use the extremely lightweight,yet powerful EUROPORT MPA40BT-PRO PA system to stream songs from your Bluetooth-enabled iOS device at the next company picnic,or to get your message across on the playing field. With its 40-Watt amplifier and premium 2-way speaker system, the EUROPORT MPA40BT-PRO provides superb sound—and the rechargeable battery lasts up to 12 hours. Add one or two of our ULM digital microphones, and you’ve got a supremely easy-to-use wireless, go-anywhere sound system on wheels! Bluetooth Ready The days of tape decks, CD players and even MP3 devices are long gone. Now your music lives on your phone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. Now with a simple wave of your hand,you can stream music from any Bluetooth audeo-equipped device such as your iPad, iPod touch, iPhone, even your laptop computer. Now, isn’t that easy? Built-in Mixer & Wireless Option Both models feature built-in 2-channel mixers with the same ultra-low noise,high-headroom mic preamps that have made BEHRINGER mixers legendary.Also included is 2-band equalizer,plus Bluetooth for streaming audeo directly from your iOS device, and our proprietary ULM wireless technology.Sold separately, BEHRINGER ULM Series digital mics integrate seamlessly to expand your MPA40BT-PRO system to handle virtually any live sound application. Whether you set your MPA40BT-PRO speakers on a table, or mount them on optional speaker stands, you’ll enjoy music streaming through this rich sounding, easy-to-setup system in mere moments. See your BEHRINGER dealer, or order your EUROPORT MPA40BT-PRO online today—and put a little more easy in your life. All-in-one portable PA system with full Bluetooth connectivity Incredibly simple to set-up and use - no technical background required 40 Watts of powerful, high-quality sound for audiences of up to 250 people Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc. . Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth AC & battery operated with up to 12 hours continuous use per battery charge Retractable luggage-style handle & sturdy wheels provide effortless transport High-quality dynamic microphone with cable included “Wireless ready" for high-quality BEHRINGER ULM digital wireless microphone system (not included) 2 microphone inputs with individual volume control Additional Aux input to connect to your CD player Effective and extremely musical 2-band EQ for perfect sound tuning Powerful 8" woofer and high-resolution tweeter driven by a Class-D amplifier Integrated stand mounting with 35 mm pole socket "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~) and low power consumption for energy savings High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

High-Performance Active 500-Watt 12" PA Subwoofer with Built-In Stereo Crossover With thousands in use around the world, our EUROLIVE B1500D-PRO and B1800D-PRO active subwoofers have become the new standard in low-frequency reproduction. But what if your application calls for a smaller system that still kicks serious butt? The EUROLIVE B1200D packs everything there is to love about these powerful systems into a more compact, easy to transport enclosure, making them ideal for small- to mid-sized venues. Armed with a 500-Watt Class-D amplifier and a host of truly professional features, these little brutes crank out tons of tight, low-end punch—with the definition and clarity typically reserved for much larger systems. Put simply, these cool-running systems provide an impressive power-to-weight ratio—and our no-compromise design means you get amazingly deep, chest-pounding bass that will keep the party going all night long. What is Class-D Technology? Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. The amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means our Class-D amps don’t need massive heat sinks, and that means we can make them lighter. Plus B1200D’s amplifier provides all the dynamic punch and fidelity you’d expect from a much larger, more expensive subwoofer. Custom-Designed Transducers The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we never cut corners, and we never just grab whatever happens to be on the shelf. We custom-design our own so they are the perfect match for both the amplifier and the application. We wind our own voice coils, process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components. The 12" long-excursion, low-frequency transducer was designed specifically for use in the EUROLIVE B1200D. Take Control The B1200D features balanced XLR inputs and outputs, as well as balanced XLR Thru jacks for connecting additional enclosures. A Boost Frequency knob lets you boost any frequency between 45 Hz and 90 Hz. Then just flick the Boost switch to give your selected frequency a +10 dB boost. We’ve also provided a High Cut dial that controls the upper-corner frequency for the internal amplifier without affecting Thru A/B signals. A Level knob controls the input gain, and the Phase switch reverses the output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance including power, signal present and input overloads. Value Plenty of power, light weight, amazing sound, rugged durability and affordability—you get it all with the EUROLIVE B1200D. Plus, we back it up with one of the best warranty programs in the industry, a full 3 years! Product Features: High-performance 500-Watt powered subwoofer for PA applications Powerful 12'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance Variable High Cut control for perfect sound alignment Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers Power, Signal and Clip LEDs for perfect monitoring Intelligent limiter for maximum sound performance and woofer protection Internal switch-mode power supply for noise-free audeo, superior transient response and very low power consumption Pole socket for mounting with commercial spacer poles Ergonomically shaped handles for easy transport Rugged steel grill for optimal speaker protection High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

Ultra-Lightweight 6000-Watt 4-Channel Class-D Power Amplifier with SmartSense Loudspeaker Impedance Compensation The NX4-6000 power amplifier packs 6000 Watts (4 x 1600 Watts @ 2 Ohms; 2 x 3000 Watts @ 4 Ohms) into exceptionally lightweight (13.4 lbs / 6.1 kg) and rack-mountable packages. And because the NX4-6000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX4-6000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come. Class-D - Massive Power,Perfect Sound Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremelypowerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. Sublimely Simple Operation The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX4-6000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you’ll find the switches that enable the NX4-6000 amp to run in your choice of dual mono, stereo or mono bridge modes. The NX4-6000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (100 Hz) is channeled to your full-range loudspeakers. SmartSense Impedance Compensation Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX4-6000’s design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area. Sound Value Sporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag – plus all the amenities a professional audio engineer could ask for – the BEHRINGER NX4-6000 power amplifier is a serious amp for your most demanding applications. Experience the BEHRINGER NX4-6000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value. Main features: Delivers 4 x 1600 Watts into 2 Ohms, 2 x 3000 Watts into 4 Ohms and weighs less than 13.4 lbs / 6.1 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with “near-zero” thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Built-in stereo crossover with low-cut, high-cut and full range mode SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance “Zero-Attack” limiters offer maximum output level with reliable overload protection Detented and illuminated gain controls for precise level setting Precise 4-segment Signal and Limit LEDs to monitor performance XLR and 1/4" TRS combination input connectors for compatibility with any source Professional twist-lock speaker connectors for ultimate reliability Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system prevents thermal buildup for reliable operation Designed and engineered in Germany

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are well suited for musicians, DJs, and entertainers as well as houses of worship, discos, or pubs.

Studijsko pojačalo maksimalne snage 500 W, linearnog frekvencijskog odaziva, i gotovo bešumnog rada izbor je velikog broja ljubitelja dobrog zvuka da gotovo nema konkurenciju u ovoj klasi. Često ovo pojačalo možete videti i u caffe i drugim instalacijama. Snaga: 2 x 230W na 4 Ohm ili 500W na 8 Ohm u bridge načinu rada. Tehnička specifikacija: * Ultra-linear power amplifier for recording studios, post-production, live sound and HiFi application * 2 x 300 Watts into 4 Ohms, 600 Watts into 8 Ohms in bridged mono operation * Servo-controlled design can drive virtually any passive speaker such as studio monitors, etc. * Advanced convection-cooling for absolutely noise-free and stable operation (no fan) * Precise level meter and clip indicators for accurate performance monitoring * Input connections on balanced XLR, 1/4'' TRS and RCA connectors * Speaker outputs on professional ''touch-proof'' binding posts and 1/4'' TS connectors * Ultra-reliable Toshiba / Fairchild power transistors * Independent thermal overload protection with LED indicator for each channel automatically protects amplifier and speakers * High-current toroidal transformer for absolute reliability and lowest noise interference * High-quality components and exceptionally rugged construction ensure long life * Conceived and designed by BEHRINGER Germany

Tehnička specifikacija EL-D100G: max 100mW (2 x 50mW), min 80mW 532nm green * Lasers: aircooled DPSS laser * laser class: 3b * Beam properties: 3mm/1mrad * Scanner system: high-speed micro step motors * Deflection angle: max. 30± optical * Scanspeed: 2-5kpps. * Control mode: DMX 512, Stand-Alone (Auto / Sound) * DMX 512: 4 channels * basic patterns: 50 (layers, tunnels, fences, waves...) * effects: more than 250 different beam effects * Laser Safety: compliance to IEC 60825-1 * accessories: power cable, manual. * power supply: 220V - 240V AC (alternative 110V) * power consumption: 40W * measukaišts: 408 x 280 x 120 mm (L x W x H) * weight: 5 kg

Energy-Efficient 80-Watt Mixer Amplifier with 70 V Output for Distributed Music, Paging and AV Applications Combining superior performance and ease-of-use with unprecedented value, the EUROCOM SN2108 mixer-amplifier is an innovative yet practical solution for distributed sound in low- complexity environments. Designed exclusively for Hi-Z systems, the SN2108 unites a 5-input mixer with an 80 W RMS mono amplifier engineered for continuous 70/100 V output. SN2108 is an ideal match for retail, hospitality,office, medical, educational and industrial spaces. Multi-function 80-Watt mixer amplifier, designed for continuous operation in distributed music, paging and AV applications State-of-the-art, energy-saving Switch-Mode Power technology with up to 80% power efficiency drastically reduces energy cost Transformerless, cool-running Class-D amplifier drives 70 V loads directly 3 balanced or unbalanced microphone inputs on TRS connectors 2 Aux inputs for music or program signals on RCA connectors Variable voice-activated music muting Lo and Hi frequency EQ for ultimate sound adjustment Intuitive front panel with dual-function indicator ring Secure 2-position terminal strip speaker output connector Independent DC and thermal overload protection plus automatic limiters for each amplifier prevent overload, clipping and distortion without shutting down audio Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption High-quality components and exceptionally rugged construction ensure long life

Take your color mixing to the next level with the ADJ Flat Par QWH12XS professional “low profile” LED fixture. It features twelve 5-Watt QUAD LEDs (4-in-1 RGBW) with smooth RGB color mixing as well as a White LED to get the hard to achieve true cool white. The units “low profile,” sideways power & DMX Ins/Outs and dual hanging brackets make it ideal for mobile entertainers, permanent installations and for inserting into truss or for uplighting. The Flat Par QWH12XS has 8 different DMX channel modes, and may also run in Sound Active or Master/Slave modes. Users can also go “wireless” with the ADJ LED RC2 wireless remote (sold separately). This LED fixture also features: 15 Color Macros, Electronic Dimming (0-100%), IEC AC IN and OUT on rear to daisy chain power and a 25-degree beam angle. The Flat Par QWH12XS LEDs are rated at 50,000 hours, and only draws 80-Watts of power per fixture. Specifications: Ultra bright slim fixture with 12x 5-Watt QUAD LEDs (4-in-1 RGBW- Red, Green, Blue & White) Unique “sit flat” design – Power & DMX Ins/Outs are intelligently designed so the unit can be set flat on the ground or set inside truss Great for performance stages where traditional par cans emit a lot of heat onto performers Low profile case design Wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC2 - sold separately) 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode Smooth RGBW color mixing (fast or slow color change operation) QUAD LED (4-in-1) projects no RGB shadows 15 built-in Color Macros Color strobe effect Flicker Free Electronic Dimming: 0 - 100% Beam angle: 25-degree Linkable via 3-pin XLR cable (In/Out) 4-button LED DMX display on rear panel Dual bracket yoke allows fixture to be hung or set on the ground IEC AC IN/OUT outlets on rear to daisy chain power (up to 7 units) Includes gel frame for optional diffusion filters Run all night – No duty cycle Long Life LEDs (50,000 hrs.) Power Draw: 80W max Multi-voltage operation: AC 100-240V, 50/60Hz (IEC power In/Out) Dimensions (LxWxH): 328x280x115mm Weight: 3.2 kg

Passive DI box Phantom power supply transmission Two intputs - symmetrical / asymmetrical jack + XLR symmetrical connectors LINE OUT 1:2 / 1:4 ratio Adjacent MONITOR OUT 1:1 / 1:2 ratio 1:2 ratio - 4 times lower output impedance 1:4 ratio - 16 times lower output impedance Correct driving of difficult lines over long distance Serves as a universal passive DI box with low output impedance The JKP features one XLR input and two 1/4” jack inputs in parallel The JKP is dedicated for multiple instruments connection such as keyboards, guitars or instrument amplifier output conditioning The JKP also features phantom power supply transmission for condenser microphone connection and output signal conditioning

Tehnička specifikacija Maximum Output Current: 10 amps Line Cord: 1.5 meter, removable, IEC C-13 female to Schuko male Lamps: LED Operating Voltage: 230VAC 50Hz Spike Protection Mode: Line to neutral Energy Dissipation: 305 joules Peak Impulse Current: 12,000 amps Maximum Continuous Opterating Voltage: 650 Volts Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz Dimensions: 1.75" H x 19" W x 7.5" D Weight: 2.3 kg. Safety Agency Listing: CE Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. Dodatne informacije A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10Lx E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. The M-10Lx E features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level. Aplications: Instrument Rigs Youve got a rack for your effects, preamps, tuner...Youre going to plug that into the wall? One big spike and your rig is up in smoke. Furmans standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furmans standard level RFI/EMI filtration, youll get a quieter tone without pops, crackles, and the local radeo station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on. Recording Cant track down where that noise is coming from? Your mix sounding flat? With Furmans standard level RFI/EMI filtration youll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furmans standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, its enough to power your whole home studio. DJ Equipment Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furmans standard level protection and filtration keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor. Pro audio When youre out there gigging, you never know what kind of power youre going to get. The wear and tear on mobile rigs eventually takes it toll - thats why its smart to plug into Furmans standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether youre setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Audio-Technica AT2035 Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount. Features: Large diaphragm for smooth, natural sound and low noise High SPL handling and wide dynamic range provide unmatched versatility Custom shock mount provides superior isolation Switchable 80 Hz high-pass filter and 10 dB pad Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Includes custom shock mount & protective pouch Specs: ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY -33 dB (22.4 mV) re 1V at 1 Pa IMPEDANCE 120 ohms MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) NOISE 12 dB SPL DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3.8 mA typical SWITCHES Flat, roll-off; 10 dB pad (nominal) WEIGHT 403 g (14.2 oz) DIMENSIONS 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE R5

18-in, 8-out USB audio interface A compact, expandable 4 pre interface with extensive I/O capabilities Description The third-generation Scarlett 18i8 is the perfect audio interface for recording engineers and producers who need to adapt to their recording environment, wherever they are. It offers eight analogue inputs: four mic/line inputs, two high-impedance, high-headroom instrument inputs and four additional fixed-line inputs on the rear. An optical input allows for expansion of up to eight additional channels for larger recording sessions. And with improved A-D and D-A conversion, your recordings and playback will sound clear and pronounced up to 24-bit/192kHz, vital to helping you perfect your mix. Scarlett 18i8 features four of Focusrite’s best-ever-performing third-generation Scarlett mic preamps: with optional Air setting to reproduce the Air effect of their original ISA mic preamp, giving your vocal or acoustic recordings a brighter and more open sound. There’s a pad on every mic preamp to accommodate higher-level signals without clipping. Scarlett 18i8 offers two extra line outputs over the previous generation, and speaker switching technology for dual monitor setups. Two independent headphone outputs allow for both engineer and artist to monitor during recording sessions, and a pair of virtual loopback inputs allows you to capture a stereo feed of any combination of hardware input and software playback channels – making podcasting, live streaming and sampling tasks easier. Scarlett 18i8 is designed to stand up to days on the road, and connects straight to your Mac® or PC via USB cable. It comes with all the software tools you need to get started: two comprehensive digital audio workstations, Ableton® Live Lite™ and Pro Tools® First Focusrite Creative Pack; Softube’s Time and Tone Bundle; Focusrite’s Red Plug-in Suite; a choice of one of four of XLN Audio’s Addictive Keys. If that wasn't enough, Focusrite have partnered with Splice to give 3rd Gen. interface owners a free 3-month Splice Sounds subscription when setting a new Splice account. Splice Sounds offers millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily from your favourite producers, sound designers, and artists. Creators use Splice to make all kinds of music, including chart-topping pop, Grammy-winning albums, underground mixtapes, and cinematic scores. And as with all Focusrite products, you’ll also benefit from membership of their Plug-in Collective offering free software downloads and generous discounts, as well as a two-year warranty, award-winning customer support. Key Features Four of the best performing mic preamps the Scarlett range has ever seen, now with switchable Air mode to give your recordings a brighter and more open sound Two high-headroom instrument inputs to plug in your guitar or bass Eight balanced line inputs for connecting synthesisers, drum machine and other line-level sources High-performance converters enable you to record and mix at up to 24-bit/192kHz Four monitor outputs with anti-thump technology and speaker switching Included Software Ableton Live Lite music making software Pro Tools | First Focusrite Creative Pack Free 3-month Splice Sounds subscription with new Splice accounts Focusrite Red 2 & Red 3 Plug-In Suite A choice of 1 of 4 XLN Audio Addictive Keys virtual instruments Softube Time & Tone Bundle Access to the Focusrite Plug-in Collective What's in the box Scarlett 18i8 3rd Gen. 1 x USB cable (Type C-A) Power Supply System Requirements The easiest way to check that your computer’s operating system (OS) is compatible with the Scarlett 8i6 is to use our online OS Checker Specifications Connectivity - USB Type-C Protocol - USB 2.0 Form Factor - Rack Mount (1U) Simultaneous I/O - 18 x 8 A/D Resolution - 24-bit/192 kHz Number of Preamps - 4 Number of Pads - 4 Phantom Power - YES Instrument Inputs - 2 Line Inputs - 8 Analogue Outputs - 4 Headphone Outputs - 2 Main/Alt Speaker Switching - YES (via software) Digital Inputs - S/PDIF & ADAT input Digital Outputs - S/PDIF MIDI I/O - YES Loopback - YES Bus Powered - NO Included PSU - YES

UR28M kombinuje interfejs i monitrol kontroler u jednoj desktop konzoli. Opremljen sa dspMixFx ovaj uređaj omogućava DPS monitoring bez latencije sa Cubaseom ili drugim DAW softverom pri profesionalnom snimanju. Dva TRS ulaza i dva kombo ulaza sa mikrofonskim preampom i fantomskim napajanjem i ulaz sa visokm impedansom. Sam kontrolor na svom panelu ima veliki broj komandnih jedinica što pruža fenomenalnu kontrolu nad velikim brojem funkcija softvera. • 24-bit/96 kHz USB 2.0 audio interface • Analog 4 in and 6 out plus stereo input for reference source • S/PDIF coaxial I/O • D-Pre Class-A discrete mic preamps supporting +48V • Latency-free DSP-powered monitoring with one REV-X reverb and four Channel Strips with any DAW by using the latest dspMixFx technology • Native VST 3 plug-ins of REV-X and Channel Strip • Digitally controlled monitor level control with DIM, Mono, and Mute fed by a 3x3 monitoring matrix • 2 separate headphone buses with individual outputs • Cross-platform compatibility: Cubase AI DAW software and drivers for Mac OS X and Windows

Mikser premium klase sa 18-ulaza i 3/2-busa, XENYX mikrofonska pretpojačala i kompresora, "Wireless" mogućnost rada i USB/audio interfejs. Sa milionima odanih i srećnih korisnika, Behringer XENYX mikseri su uverljivo najpopularniji u okviru svog cenovnog ranga. Opremljeni sa mikrofonskim pretpojačalima premium klase i mnogim naprednim opcijama koje viđate samo kod mnogo skupljih miksera, nova generacija XENYX Q serije USB miksera može podneti sve što od nje zatražite tokom Vaših nastupa i pruža vrhunske mogućnosti - sve sa ciljem stvaranja zadivljujućeg i profesionalnog zvuka. Odaberite jedan od modela sa oznakom "wireless ready" integracije i budite spremni za potpuno novu ULM seriju USB mikrofona - prvim mikrofonima te vrste u muzičkoj industriji. Uz ugrađeni USB/audio interfejs, "jedno-dugme" mono-kanalne kompresore, KLARK TEKNIK FX efekte (dostupne uz odabrane modele), XENYX Q serija USB miksera dolazi sa svim potrebnim softverom za snimanje i uređivanje snimaka na računaru koji će Vam ikada biti potreban, pa će od Vašeg računara stvoriti recording studio visokih performansi. . Tehnička specifikacija: * Premium ultra-low noise, high headroom mixer * 6 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps * 6 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound * Ultra-high quality KLARK TEKNIK FX processor with LCD display, dual-parameters, Tap function and storable user parameter settings * "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included) * Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com * Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound * 9-band stereo graphic EQ allows precise frequency correction of monitor or main mixes * Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies * Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image * Voice Canceller function for easy-to-use sing-along applications * Channel inserts on each mono channel for flexible connection of outboard equipment * 3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send) * Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels * 2 subgroups with separate outputs for added routing flexibility and 2 multi-functional stereo aux returns with flexible routing * Balanced main mix outputs with gold-plated XLR connectors, headphone/control room output and stereo rec outputs * Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls * "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving * High-quality components and exceptionally rugged construction ensure long life * Conceived and designed by BEHRINGER Germany

Realtime Vocal Sampler and FX Processor with Drum Looper Ready to take your performances to weird, wonderful new heights? The TC-Helicon Perform-VE vocal processor samples your voice and enables control of its playback via a MIDI controller, with today's hottest EDM and pop vocal effects — vocoder, autotune, and stutter — on tap to make it memorable. Whether you're a DJ or an acoustic performer, once you gig out with the Perform-VE, you'll never want to leave home without it. An onboard Midas mic preamp with Adaptive Tone processing gives you clean, clear vocals without any menu diving. You can even dial in your own studio-quality reverb and delay on the fly. Another great feature in the Perform-VE is the one-touch looper, whose built-in drums make it easy to build beats on the spot. Realtime voice sampling and drum looping Perform beside your own virtual choir or craft beats off the cuff with the TC-Helicon Perform-VE. It effectively turns your voice into a MIDI-playable instrument. Shift your vocals into unreachable octaves or mangle them beyond recognition. Then layer in beats via the one-button drum looper. Both features include MIDI time sync for connecting to external devices. A true vocal workhorse Sweetwater knows that vocalists of all backgrounds, contemporary to traditional, will enjoy the Perform-VE's solid microphone front end and studio-quality FX. Perfect for practice A headphone output makes the Perform-VE a valuable tool to have for hashing out songs at the hotel or gearing up in the green room. TC-Helicon Perform-VE Vocal Processor Features: Turns your voice into a playable instrument Essential for live EDM, dance, and DJ sets Onboard autotune, vocoder, and stutter effects create memorable performances Midas mic preamp provides a clean, clear front end Adaptive Tone sets EQ, compression, de-essing, and gating based on your voice Studio-quality reverb, echo, doubling, and filter effects Pitch shift and gender shift Looper with built-in drum samples Tap tempo and MIDI tempo sync Hands-on control with optional MP-75 or MP-76 microphones (sold separately) Power supply and USB cable included

The TASCAM TA-1VP vocal processor was co-developed with Antares Audio Technologies to bring together everything you need for a polished, modern vocal sound, in the studio or live. The rackmount processor includes a microphone preamp, compression, de-essing, microphone & tube modeling and Antares’ world-famous Auto-Tune™ pitch correction. Whether you want gentle, transparent pitch correction or the full-strength effect that's required for pop or hip hop vocals, the TA-1VP delivers this sound for you on stage. Perfect for live performance, house of worship or studio use, the TA-1VP brings your vocal sound into the 21st century. A high-quality XLR microphone input is provided on the TA-1VP front panel, with phantom power for condenser mics. Processing is laid out in simple-to-use blocks on the front panel, each with dedicated buttons and meters to show you exactly what’s being done to the signal. Antares’ microphone and tube modeling takes the input signal and gives it the character of another microphone, with a library of classics to choose from. The De-essing module removes sibilance from your signal before variable-knee compression and gating. A great-sounding digital EQ is last in the chain before output. The Auto-Tune module can be set for any level of pitch correction, in a variey of user-selectable scales. All settings can be recalled through presets on the front panel or through MIDI. Balanced TRS input and outputs are located on the rear panel, including a Double Track out for simulating doubled vocals. A S/PDIF digital output is also provided. Built for every audio application from live performance to studio mixdown, TASCAM’s TA-1VP is the only hardware processor with Auto-Tune technology for flawless vocal intonation.

TC Helicon Voiceli ve® Touch 2 omogućava svim pevačima širom sveta potpuno novi nivo mogućnosti pratećih vokala, i to iz male kutijice koja je uvek dostupna pod rukom tokom svirke. Ipak, od kada imate slobodne ruke da "zgrabite" mikrofon kada to želite, zašto biste koristili samo pojedinačne efekte u pedalama? Priuštite Vašim prstima Voiceli ve®Touch 2 i preuzmite kontrolu nad harmonijama, efektima, pa čak i nad loopingom. Intuitivni ekran postavlja Vas u položaj za upravljanje svim kontrolama koje su Vam potrebne. Možete jednostavno pretražiti više od 200 preseta kako biste pronašli savršeni zvuk. Takođe, možete sačuvati Vaše omiljene kombinacije/uređene presete na do 20 memorijskih lokacija sa brzim pristupom. Za povezivanje, Voiceli ve® Touch 2 nudi XLR mikrofonski ulaz sa ugrađenim DI-Box prekidačem, XLR izlaz, TRS izlaze, gitarski ulaz i izlaz, 1/8" Aux ulaz, MIDI konekciju, 1/4" konekcije za povezivanje footswitch kontrolera i USB konekciju. Tehnička specifikacija: * 9-button Touch Matrix speeds editing and control * Ultra-responsive Slider FX for hands-on experimentation * Hit button switches multiple effects from basic to shake it! * Dedicated tap tempo button matches Delay and Rhythmic effects timing to live beats * Tone feature includes Adaptive EQ, Compression, Gating and De-essing * Perfect harmonies and pitch correction via Auto Key Detection. * Simple effects customizing with styles and icons. * Huge, free library of song and artist presets * Optional 3-button footswitch allows hands-free control * Reverb, modulation effects and tuner for guitar input * Innovative mic stand-to-desktop non-skid chassis * High quality mic pre-amp * USB for audio recording and playback, preset backup and more * Mic Control™ compatible * Effects - µMod - Echo & Delay - Reverb - Harmony - Double - Choir - Transducer - Rhythm - Tone - HardTune & Correction - Guitar FX & Tuner - VLOOP™ * Control - 300 customizable presets; 200 pre-programmed factory presets, 100 blank - 9 instant-access Favorite presets - 22 touch buttons - Touch slider - Simple, style based, essentials-only editing with graphics - Genre feature to assist preset browsing - Mic input level * Size - Height: 9 inches (230 mm) - Width: 7 inches (180 mm) - Depth: 4 inches (100 mm) - Mic Stand Mount: fits stands with 15.4-16.4 mm diameter * Weight - Weight: 3.5 lb. (1.6 kg) * Construction - Rubber coated bent aluminum and die-cast metal - Acrylic touch panel - Inner bent metal chassis - Soft-touch end caps and level knobs - Blue LCD graphic display

Dodatne informacije The Voice Box packs a multi-functional vocal synth processor into a tough and compact chassis. Sing, and you-ll have a troupe of backup singers following you in perfect harmony. Or use the built-in vocoder to unleash classic synth-robot sounds. Diana Ross had the Supremes, Brian Wilson had the Beach Boys, Kraftwerk had The Robots. You have the Voice Box. The harmony processor creates 2- to 4-part harmonies directly from your vocals, in the same key as your accompanying instrument. studio-quality reverb lets you independently add depth to your dry and harmony vocals. The focused 256-band articulate vocoder, designed by the same EMS genius who made vocoding famous, features adjustable harmonic enhancement and controllable formant shift. Plug in your mic and your instrument, and let your new voiceor voicesbe heard!

Specs: 9 Touch-sensitive motorized channel faders (8 x channel, 1x master) 8 Continuous rotary knobs Jog wheel Illuminated transport buttons 2 Illuminated track buttons 2 Illuminated bank buttons Integrated iCon Quick Setup driver for easy Plug & Play installation in Cubase, Nuendo, Reason and Bitwig Mackie Control protocol for almost every DAW Mackie HUI protocol for controlling Pro Tools iMap software for assigning keys and for firmware updates Solid aluminium housing with Kensington lock Class-compliant with Windows XP, Vista (32 bit), Windows 7 (32 and 64 bit), Windows 10 (64 bit) and Mac OS X (Intel Mac) Incl. power supply (12V/2.5A) and USB cable Matching display Icon Platform D: Article Nr 396647 (not included) USB Yes Bluetooth No 5-pole DIN MIDI No Ethernet No Fader 9 Rotary Encoders 8 Audio I/O No Transport Function Yes Footswitch Connector No Foot Controller Connection No Bus-Powered Yes Jog Yes Joystick No Additional Features Mackie HUI

Open, circumaural studio reference headphones with patented S-Logic® Plus technology that delivers transparent, analytical sound for mixing and mastering. With the ULTRASONE PRO 1480i, we are expanding our portfolio to include open studio headphones. This addition perfectly complements our existing line-up of closed models for professional use. Thanks to an open construction, these dynamic over-ear headphones deliver a particularly airy, crystal clear sound. The transparent and neutral sound reproduction makes them perfect for demanding mixing and mastering tasks in which music has to be assessed analytically. High-quality 40mm Mylar transducers and light yet powerful neodymium magnets ensure detailed sound. The extremely balanced frequency range, from 20 to 20,000 Hz, covers the entire range of human hearing. So not one subtle nuance is lost in professional applications. The PRO 1480i makes use of patented S-Logic® Plus technology, which creates an incomparably spatial effect thanks to decentrally positioned sound transducers. When combined with the open construction of the headphones, a broad sound stage is created that is perfect for precisely analysing audio signals. Another advantage of S-Logic® Plus technology is the higher perceived volume: significantly lower sound pressure achieves the same listening experience. This protects your hearing, especially when using frequently and for long periods. Thus long hours of fatigue-free listening are possible. The combination of S-Logic® Plus technology and the open construction works wonders: these headphones are light and easy fitting, and open ear cups allow air to the ears. This guarantees maximum comfort, no matter how long the session. Sound engineers and musicians have a wide range of requirements for professional audio equipment in general and professional headphones in particular: they not only have to sound good and fit comfortably; they also have to be robust to master the challenges of demanding days in the studio. That’s why our ULTRASONE PRO 1480i open reference headphones have an especially solid design – guaranteeing long years of analytically precise listening. The soft velour ear cushions can easily be replaced if signs of wear and tear begin to appear after years of use. The three-meter-long coiled cable is also detachable and can be changed when a shorter cable is needed, for example. These circumaural headphones are musical allrounders that are just as suitable for classical and jazz as for rock and pop. That’s why the ULTRASONE PRO 1480i is the perfect listening tool for anyone seeking professional studio headphones with open construction as a reference for mixing and mastering. Technology: S-Logic® Plus technolgy Principle: dynamic/open SPL: 94 dB Magnet: NdFeB Driver: Mylar Driver size: 40 mm Frequency range: 20 – 20.000 Hz Impedance: 32 Ohm Ear pads: speed-switch velour ear cushions (black) Cable 1: approx. 3 m detachable coiled cable with gold-plated 3.5 mm mini jack Weight (excl. cable): 295 g Adapter: 3.5 mm/6.3 mm gold-plated adapter, screwable Case: transport bag