SPECIFIKACIJE: Channels 12 Inputs 4 x XLR, 12 x 6.3mm Jack Outputs 4 x 6.3mm Jack Headphone Output 6.3mm Jack EQ 3-Band FX 56 FX Logic Acoustic Modelling FX: Room, Plate, Hall and Gated Reverb, Chorus, Flanger, Rotary speaker, Delay Phantom Power Yes USB 16-bit / 48kHz Signal To Noise Ratio >78dB ±5dB @ Max Gain Frequency Response 20Hz-20kHz ±1dB Display Dual 4-Segment LED, FX Setting Display Dimensions (H x W x D) 360.2mm x 183.8mm x 52.8mm Weight 1.69kg / 3.3lbs 16 Total inputs (4 x XLR / 6.3mm Jack, 4x twin 6.3mm jack) 4 x 6.3mm jack outputs (master, control room) Studio grade phantom power XLR 16 bit / 48kHz built in USB audio interface Playback and record via USB audio interface 80Hz HPF on first 4 channels Headphone output Pan / Balance control Clip LED display Ideal for home studio recording and live use slimline profile for portability and to fit in gig bags FX Send 56FX Logic effects built-in with independent send

Opis media player media player

Opis Meirende P11 Zvučnik Bluetooth -Zvučnik kofer NEKORIŠĆENO Orginalno fabricko pakovanje, Bluetooth zvučnik/kofer sa svetlosnim efektima i sopstvenom punjivom baterijom. Meirende P11 Zvučnik Bluetooth -Zvučnik kofer Meirende P11 Zvučnik Bluetooth -Zvučnik kofer Meirende P11 Zvučnik Bluetooth -Zvučnik kofer

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardeoid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD@1000Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

Make great recordings effortless Capture your microphones and instruments and start recording audio directly to your computer with EVO 8’s intuitive feature set. EVO 8 has all of the innovative new features found on EVO 4 but provides additional inputs and outputs alongside unrivalled performance and functionality – all off of bus power. Made for you Made for the smart creative, EVO 8 will deliver a powerful recording solution no matter your artform. Capture creativity fast Whether recording your latest track, producing a beat, or creating a podcast EVO 8’s advanced and versatile feature set lets you take control of any recording session. Unrivalled audio performance Building on Audient’s 20+ years of audio design experience, EVO 8 gives you unrivalled audio quality on your desktop. 4 x EVO Preamps Get the most from your microphones with the warm and accurate EVO preamps – offering 58dB of gain range. High Performance Converters Hear your recordings more accurately than ever and make better mix decisions with 113dB of dynamic range. Instrument Input Plug your guitar or bass straight in through the JFET instrument input and start recording instantly. Smartgain Mode Work smarter not harder Make sure you capture everything perfectly with Smartgain mode. Start playing or singing and Smartgain mode will automatically set the level of your microphones. You can even perfectly match and adjust gain to both channels simultaneously. Features: 4 x EVO Mic Pres Class Leading Converters Smartgain Smart Touchpoints JFET Instrument Input 2 x Speaker Outputs 2 x Headphone Outputs Ultra-Low Latency Monitor Mix Loopback Functionality USB2.0 Bus Powered Free Software + Plugins 58dB Gain Range 113dB Dynamic Range (ADC) 113dB Dynamic Range (DAC) -127dB Mic Pre EIN 4ms Low Latency Performance 24bit 96kHz sample rate USB-C class compliant DAW Controlled Mic Pres Loopback Functionality +48v True Phantom Power over USB Powerful Control Smart touchpoints Control your speakers, headphones and channels all using the volume encoder. Monitor Mix Leave latency behind. Blend between your inputs and DAW playback to reduce latency when recording. Monitor Pan Pan your inputs and DAW playback left or right and create the perfect headphone balance for recording. Switchable +48v Individually switch phantom power on/off for each channel and give your microphones the power they need. Multi-function buttons Channels 1-4 and both volume buttons can quickly be muted by simply holding them down until they begin to flash. Software Control Set the gain of your mic pres using your DAW, your settings will also be stored in your session. Work anywhere All of EVO 8’s advanced features are powered directly from your computer via USB, letting you start recording on the go, whenever inspiration strikes. Free software Compatible with all major audio software and plugins, EVO 8 comes bundled with a collection of professional software, giving you everything you need to start recording. Loopback Loopback enables you to record your computer audio at the same time as your microphones. Ideal for podcasters and streamers. Design Minimalist layout. Innovative Engineering. Modern aesthetics. EVO 8 has been designed to last and look at home on your desktop.

An Interface for Your Mac/PC and iPad With Steinberg's UR22mkII, you can record studio-grade sound, right on your laptop or iPad. When it comes to audio and build quality, the UR22mkII punches above its weight with top-shelf components, flexible I/O, and bundled software that make it a veritable mobile production platform at an unbelievable price. Of course, connected to a Mac or PC, the UR22 has always been a solid interface. But now with the mkII version, you also have pro-level recording on your iPad for an unprecedented level of flexibility. On the road or in the studio, the Steinberg UR22mkII delivers. Steinberg UR22mkII USB Audio Interface at a Glance: Easy, stable integration with any recording rig Bundled Steinberg software for computer and iPad Easy, stable integration with any recording rig For the UR22mkII, Steinberg's crack team of audio and driver software developers engineered an I/O implementation that gives you both stability and flexibility, with drivers that support ASIO, Core Audio, and WDM standards. This means you can connect to all DAWs that support any of these universal standards. What's more, the UR22mkII features CC Mode, which enables it to easily connect to your iPad and work with a broad range of iOS audio apps. Bundled Steinberg software for computer and iPad The UR22mkII includes Cubase AI, a streamlined version of Steinberg's world-class Mac/Windows production environment. On the road? Download Cubasis LE from the App Store for an enticing palette of recording and mixing features optimized for touchscreen operation on your iPad. Especially cool is the fact that Cubase can open Cubasis LE projects, so you can quickly capture your musical ideas on your iPad, then transfer them to Cubase for further development in your studio. With this degree of flexibility, you can take projects from concept to mastered album - all with one compact and cost-effective piece of hardware. The first-generation UR22 was a hit here at Sweetwater, but the UR22mkII ups the ante, big time! Steinberg UR22mkII USB Audio Interface Features: 24-bit/192kHz USB 2.0 audio interface 2 Class A D-PRE mic preamps supporting +48-volt phantom power 2 combo inputs (hi-Z switch on input 2) 2 TRS outputs and headphone jack with independent level iPad ready with CC Mode and additional USB mini socket Zero-latency hardware monitoring with Mix balance control MIDI input and output Rugged all-metal housing Loopback function for streaming performances live Includes Cubase AI DAW software (download) for Mac and PC Cubasis LE DAW app for iOS (download) included Cross-platform compatibility for Windows, OS X and iPad* *Requires optional Apple iPad Camera Connection Kit or Lightning to USB cable *Requires external power input when connected to iPad Steinberg's UR22mkII is the heart of your studio/mobile recording rig!

ZED-6 has been created for musicians, singer / songwriters and venues seeking Allen & Heath’s renowned build and audio quality in a compact, portable format. Whether it’s bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. Guitarists will be pleased to know that ZED-6 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes. 2 Mic / Line Inputs with separate XLR and TRS jack sockets 2 Stereo Inputs with TRS jack sockets 2 Guitar DI high impedance inputs, eliminating the need for DI boxes Lo-cut filter for cleaning up unwanted low frequency noise 2 band EQ for easy creative and corrective tonal shaping 60mm smooth travel fader on main mix XLR main outputs Flexible signal monitoring 8 LED signal metering 48V Phantom Power for condenser mics Robust internal power supply

SPECIFIKACIJA: Input/Output Simultaneous I/O up to 2 inputs/2 outputs 2 mic/instrument/line inputs with XMAX-L mic preamps 2 balanced ¼” TRS main outputs 1 stereo headphone output MIDI In/Out 1 USB-C 2.0 port USB-C to USB-C and USB-C to USB-A cables included for compatibility with most computers Meters, Controls, and Features Mixer knob for low-latency direct input monitoring Front-panel level controls for main outputs +48V phantom power for condenser microphones (global) 4 ladder-style LED level meters (2 input, 2 main output) Integrated Software Studio One Artist® Studio Magic Plug-in Suite Digital USB-C port (USB 2.0) 24-bit resolution 44.1, 48, 88.2, 96, 176.4 and 192 kHz sampling rates Physical Road-rugged construction with all-metal chassis and metal knobs USB bus-powered General Sample Rates 44.1, 48, 88.2, 96, 176.4, or 192 kHz Converter Resolution 24 bit ADC Converter Dynamic Range 108 dB DAC Converter Dynamic Range 108 dB Microphone Inputs Maximum Level +10 dBu (±0.5 dBu, min gain) Gain Range 50 dB Frequency Response 20 Hz - 20 kHz (±0.3 dBu, unity gain, unwtd) Dynamic Range 106 dB (A-wtd, min gain) THD + N 0.004% (1 kHz, -1 dBFS, min gain) EIN -126 dBu (A-weighted, 150Ω, max gain) Input Impedance 1.4 kΩ Phantom Power +48 VDC (10 mA total) Instrument Inputs Maximum Level +19 dBu (min gain) Gain Range 50 dB Frequency Response 20 Hz – 20 kHz (±0.1 dBu, unity gain, unwtd) Dynamic Range 105 dB (A-wtd, unity gain) THD + N 0.002% (1 kHz, min gain) Input Impedance 750 kΩ Main Outputs Type ¼" TRS, Female Maximum Level +10 dBu (1 kHz, unity gain, balanced) Frequency Response 20 Hz – 20 kHz (±0.3 dBu, unity gain, unwtd) Dynamic Range 104 dB (unity gain, unwtd) THD + N 0.001% ( 1 kHz, -1 dBFS, unity gain) Headphone Outputs Maximum Power 47 mW / channel @ 56Ω Frequency Response 20 Hz – 20 kHz (±0.5 dBu, unity gain, unwtd) Dynamic Range 83 dB (A-wtd, 56Ω load) THD + N 0.01% (1 kHz, 0 dBFS, loaded) Impedance Working Range 32Ω to 300Ω Physical Height 1.75" (44 mm) Width 7" (180 mm) Depth 5.5" (144 mm) Weight 2 lbs. (0.9 kg)

Prvo što vidite je perfektan dizajn... A onda ih poslušajte... Prethodnik svih visoko kvalitetnih HI-FI modela iz Ultrasone programa i jos uvek njihov best-seller. -S-Logicâ„¢ Natural Surround Sound Plus Dynamic principle -Frequency range 10-26.000 Hz -Impedance 35 Ohm -Sound pressure level 96 dB -MU Metal bufferboard, reduced field emissions in accordance with ULE (=Ultra Low Emission) standard -Driver 40 mm gold-plated -Weight 285 g (without cord) -Straight cord (length ca 1m) / 3.5mm gold-plated plug -Incl. extension cord (ca 4m) 3,5/6,3 mm screwable gold-plated plug -Transportation bag -Demo CD -Instruction manual Prvobitno zamišljene za studijski rad, HFI 780 su tokom godina doživele nekoliko značajnih modifikacija, prvenstveno da se prilagode muzičkim i filmskim entuzijastima. Napretkom u muzičkoj, a naročito u filmskoj produkciji, te promene su najviše izražene stalnim povećanjem frekventnog opsega, stavljajući poseban akcenat na bas frekvencije, da bi dobili što vernije rezultate. Samim tim su idealno rešenje kod korišćenja bilo kog DSP sistema (DOLBY HEADPHONEâ„¢ , Yamaha silent cinema itd...). Rezultat je čisto uživanje...

product Features 6 inputs 2 mic channels 2 stereo channels Bluetooth 16 DSP effects product Specification Inputs: 6 Mic Inputs: 2 Stereo Inputs: 2 Mic Gain Range: 6dB to 50dB Line Gain Range: 10dB to 34dB EIN: -100dB Frequency Responce: 10Hz – 20kHz (+1/-3dB) THD Mic Channel: <0.1% Signal to Noise Ratio: 80dB Output Levels: Max +26dB (Bal), +20dB (unBal) EQ: Hi 12kHz, Mid 2.5kHz, Lo 45Hz, Lo cut 80Hz USB/SD: MP3 Audio playback Record: To USB drive or SD card (128kbps mono) DSP Effects: 16 DSP effects Power Requirements: 100V – 240V ~ Dimension W*H*D: 227 x 70 x 359 (mm)

Tehnička specifikacija * ELEMENT: Dynamic * POLAR PATTERN: Hypercardioid * FREQUENCY RESPONSE: 80-17,000 Hz * OPEN CIRCUIT SENSITIVITY: -56 dB (1.5 mV) re 1V at 1 Pa * IMPEDANCE: 300 ohms * WEIGHT: 279 g (9.8 oz) * DIMENSIONS: 164.2 mm (6.46") long, 38.8 mm (1.53") diameter * OUTPUT CONNECTOR: Integral 3-pin XLRM-type * ACCESSORIES FURNISHED: AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones. Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition. The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield. It is supplied with a removable microphone ‘flag’ that can accommodate high-visibility branding. The Reporter is covered by RØDE’s industry-leading support guarantee, with a twelve month warranty ‘out of the box’ that is easily increased to ten years free of charge, following online registration of the microphone.

The sE X1R ribbon microphone is the new high performance passive ribbon from sE Electronics. The sE Electronics X1R is suited to a variety of recording applications including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over. This state of the art ribbon element enclosed by top grade Neodymium magnets boasts some of the latest ribbon microphone technologies from sE Electronics. We have combined our traditional ribbon technology with some of the mechanical elements of our patented Voodoo microphone HF (High Frequency) extension technology to bring you a classic sounding ribbon mic with a gentle HF lift. The sEX1R does not offer the full frequency response performance of the Voodoo VR1 / VR2 and the widely acclaimed sE Rupert Neve RNR1, but a hybrid of old and new ribbon technology which gives you all the natural beauty of the ribbon sound, but with more versatility and ease of use than the majority of ribbons on today's market. The sE X1R also draws on the chassis and design elements of the hugely successful sE X1 Cardeoid Condenser Microphone to bring you exceptional performance, and the hand-crafted capsule quality you expect from all sE mics, but at a fraction of the cost of other boutique brands. Type: Passive Element: 2µ aluminum ribbon Frequency Response: 20-16K Hz ±1dB Sensitivity: -55.3dB 1V/Pa ±1dB Directional pattern: Figure of 8 Impedance: ≤200 ohm Connector: 3-pin Max SPL: 135dB Weight: 0.5KG

AKCIJA!!! REDOVNA CENA: 249e, ARTIST PROMO CENA: 99e!!! Veoma jak stroboskop sa DMX-512 protokolom. - Now with DMX-512 protocol! - 1500W massive output strobe light - Speed control (1-15 flash per sec.) - 0-100% dimming (controlled by dimming knob on unit or by SS-DMX/Matrix strobe controller) - Link up to 4 S-1500's via XLR cable - Hanging bracket included - Lamp: XOP-1500, 1500W - Dimensions: 419 x 223 x 121mm - Weight: 3,6kg - 220V operation only

The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle. Included are 2 additional fresnel lenses of 10 & 45 degres The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores. Features: Compact LED Pinspot with ACL lens for a tight, razor sharp beam 2 additional fresnel lenses of 10 & 45 degree included 4-button LED display on rear panel Scissor bracket system allows fixture to be hung or set on the ground Run all night – No duty cycle Flicker-free operation for film and television Strobe effect Electronic Dimming: 0 - 100% Beam angle: 4-degree Specifications: 15-Watt Warm White LED 2 DMX Channel modes: 1 or 2 channel modes Linkable via 3-pin XLR cables (In/Out) Power Draw: 15W max Long Life LEDs (10,000 hrs.) 3-pin XLR In/Out pigtails powerCON In/Out Multi-voltage: 100-240V, 47/63Hz Dimensions (LxWxH): 3.5” x 6.75” x 3.5”/ 88 x170 x 87mm Weight: 2.6 lbs. /1.2 kgs

RC System 2.5 is the first acoustic correction system that combines a highly accurate MEMS measurement microphone, measurement software and a correction plug-in to improve the audio monitoring quality of your studio in an elegant, affordable and portable solution. Measurement software features Automatic multi-point room measurement system based on Audyssey MultEQ® XT32 technology Measurement precision when used with ARC System microphone: +/- 0.5 dB Saves measurement sets to be opened with the ARC System Correction plug-in Correction plug-in features Multi-platform high quality frequency and time domain correction processor based on Audyssey MultEQ® XT32 technology Correction precision when used with ARC System microphone: +/- 0.5 dB Correction processor resolution: 32-bit floating point Correction processor supported sampling rates: 32 kHz to 192 kHz Four factory target curves plus four custom target curves to match engineers’ personal tastes Virtual Monitoring feature mimics the sound of various listening devices Professional measurement microphone features Type: precision measurement MEMS microphone Polar pattern: omnidirectional, free field Capsule frequency response: 20-20,000 Hz Calibrated frequency response when used with ARC: 20-20,000 Hz, +/- 0.5 dB Output: transformerless, electronically balanced, 100 ohms output impedance SNR: 65dB (A) Max SPL: 124 dB Phantom power: from 12 to 48V Size: 129.5mm/5.1" x 23mm/0.91" Weight: 25g/0.88oz Package includes Professional measurement microphone Mic clamp Software license Audyssey MultEQ® XT32 details MultEQ® XT32 captures acoustical information at multiple locations throughout a listening area in both the time and frequency domains. It uses a sophisticated clustering algorithm to combine this information so that acoustical problems are accurately analyzed. Based on these measurements, MultEQ® XT32 calculates an equalization solution that corrects for both time and frequency response problems in the listening area and also performs a fully automated system setup. The result is clear, well-balanced sound for your studio. Click here for more information about Audyssey. System Requirements Mac® (32 and 64 bit) Minimal: Intel® Core 2 Duo Processor, 4 GB of RAM, Mac OS® X 10.7 or newer. Supported Plug-in formats: Audio Units, VST 2, RTAS, AAX. Requires a Core Audio compatible Audio Interface that supports 48 kHz sampling rate (for room measurement). Note: PPC CPU is no longer supported. Windows® (32 and 64 bit) Minimal: Intel® Core 2 Duo or AMD Athlon 64 X2 Processor, 4 GB of RAM, Windows 7 (32 bit or 64 bit) or newer. Supported Plug-in formats: VST 2, RTAS, AAX. Requires an ASIO compatible Audio Interface that supports 48 kHz sampling rate (for room measurement).

Specs Microphone Input Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground Microphone Input Level: from 6 mVpp to 1.4 Vpp Microphone Input Impedance: 3.2 kOhms Gain Range: 40 dB Phantom Power: +48V ± 4V Frequency Response: 20 Hz - 20 kHz +/-1.5dB Input Noise: -103 dB(A), -97 dB RMS Instrument Input Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground Instrument Input Level: from 30 mVpp to 6.9 Vpp Instrument Input Impedance: 1 MOhms Gain Range: 27 dB Frequency Response: 20 Hz - 20 kHz +/-1.5dB Input Noise: -103 dB(A), -97 dB RMS Stereo Headphone Output Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground Headphone Level Control numbered thumbwheel Headphone Level Power 100mW into 50 Ohms Stereo Headphone Output Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground Headphone Level Power 100mW into 50 Ohms MIDI Input/Output Connector: 2x2.5mm TS Jack Other Input/Output DC barrel: 1x DC barrel. For power and device charging. Device Connector: mini-DIN Common Conversion: 24-bit A/D, 24-bit D/A Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz Power: USB bus powered when used with a computer Battery powered (2xAA included) when used with an iOS device DC power supply (not included, iRig PSU 3A sold separately)* Package includes iRig Pro I/O universal Audio-MIDI interface Lightning to Mini-DIN connection cable (60cm/23.62") USB to Mini-DIN connection cable (60cm/23.62") 2 x 2.5mm jack to MIDI cable (160cm/63") 2 x 1.5V AA Battery Velcro strip Dimensions Size: 43mm/1.69" x 127mm/5" x 37mm/1.46" Weight: ~120g/4.23oz (batteries excluded) Lightning to Mini-DIN connection cable: 60cm/23.62" USB to Mini-DIN connection cable: 60cm/23.62" 2.5mm jack to MIDI cable: 160cm/63" Compatibility iOS Devices Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation. iOS 6 or later is required. Computers Mac®: Mac OS X 10.6 or later. One free USB port. Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8/10. See our FAQ here for further details. Android Devices Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG to Mini-DIN cable (sold separately) is required. * Use only the specified AC adaptor * Use only the specified AC adaptor (iRig PSU 3A) and make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. IK Multimedia will not be responsible of any damage caused by usage of any AC adaptor other than the specified one (iRig PSU 3A). The usage of AC adaptors other than the specified one (iRig PSU 3A) could compromise the user experience in terms of: Safety risk, Apple device charging performances, Noise performances.

RODE's first-ever audio interface, the Ai-1, is perfect for the USB-C-equipped mobile media workstation. Music and filmmaking to podcasting and streaming — wherever you find yourself needing clean, dependable audio in a compact bus-powered system, the Ai-1 delivers. The Ai-1's compact design and streamlined controls, along with its USB bus powering and +48v phantom power, are all you need to make great recordings at home or on the go. Balanced 1/4" outputs and a high-quality headphone amp empower you to make accurate mixing and monitoring decisions from the studio to the coffee shop. And, it should be no surprise that the Ai-1 pairs great with the NT1-A and other popular RODE microphone models. Expect more out of your mobile interface — check out the RODE Ai-1. Features: Compact 1-channel USB-C audio interface Combination XLR-1/4" input with +48 phantom power Supports mic-, line-, and instrument-level inputs USB bus powering delivers clean performance even away from a power supply Perfect for the home recordist or mobile musician Balanced 1/4" outputs feed a set of monitor speakers High-quality headphone amp yields great results for mixing on the go Specs: Computer Connectivity: USB Form Factor: Desktop Simultaneous I/O: 1 x 2 Number of Preamps: 1 Phantom Power: Yes Bit Depth: 24-bit Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Analog Inputs: 1 x Neutrik XLR-1/4” combo Analog Outputs: 2 x 1/4” (impedance balanced), 1 x 1/4” (headphones) Direct Monitor: Yes USB: 1 x USB Type C Bus Powered: Yes OS Requirements: Mac OS 10.10 or later, Windows 7 or later Power: USB bus-powered Depth: 100mm total (with knobs) Width: 124mm Height: 38mm Weight: 560g Input XLR/MIC INPUT Dynamic Range: 104dBA Equivalent Input Noise @ Maximum Gain: –128dBA Frequency Response: 20Hz – 20kHz better than ±1dB Gain Range: 0dB – >45dB Gain Range: 1.3k Ohms INSTRUMENT INPUT Dynamic Range: 99dBA Frequency Response: 20Hz – 20kHz better than ±1dB Gain Range: 0dB – >45dB Input Impedance: 900k Ohms Output MONITOR OUTPUTS Maximum Output Level: -6dBu Frequency Response: 20Hz – 20kHz better than ±1dB HEADPHONE Max output power at 1% THD: 32Ohms – >210mW

R1 pripada VoiceTone seriji vokalnih efekata spakovanih u stompbox kućište. Pruža 8 tipova vrhunskog Reverb efekta. Pedala je opremljena prekidačem za odabir tipa Reverba i Dry/Wet potenciometrom za kontrolu količine efekta. Pored standardnog XLR mikrofonskog ulaza i izlaza, opremljena je i USB konekcijom za lako i jednostavno povezivanje na računar. Tehnička specifikacija: * Brings studeo reverberation to live performance * Connects between your mic and mixer * High quality signal path and tough enclosure * Can be chained to additional VoiceTone Singles * Mic-Control offers remote on/off via TC-Helicon MP-75 microphone * Height: 5.4 inches (140 mm) * Width: 3.5 inches (90 mm) * Depth: 2.3 inches (60 mm) * Weight: 0.92 lb. (0.42 kg)

Dodatne informacije The Voice Box packs a multi-functional vocal synth processor into a tough and compact chassis. Sing, and you-ll have a troupe of backup singers following you in perfect harmony. Or use the built-in vocoder to unleash classic synth-robot sounds. Diana Ross had the Supremes, Brian Wilson had the Beach Boys, Kraftwerk had The Robots. You have the Voice Box. The harmony processor creates 2- to 4-part harmonies directly from your vocals, in the same key as your accompanying instrument. studio-quality reverb lets you independently add depth to your dry and harmony vocals. The focused 256-band articulate vocoder, designed by the same EMS genius who made vocoding famous, features adjustable harmonic enhancement and controllable formant shift. Plug in your mic and your instrument, and let your new voiceor voicesbe heard!

Open, circumaural studio reference headphones with patented S-Logic® Plus technology that delivers transparent, analytical sound for mixing and mastering. With the ULTRASONE PRO 1480i, we are expanding our portfolio to include open studio headphones. This addition perfectly complements our existing line-up of closed models for professional use. Thanks to an open construction, these dynamic over-ear headphones deliver a particularly airy, crystal clear sound. The transparent and neutral sound reproduction makes them perfect for demanding mixing and mastering tasks in which music has to be assessed analytically. High-quality 40mm Mylar transducers and light yet powerful neodymium magnets ensure detailed sound. The extremely balanced frequency range, from 20 to 20,000 Hz, covers the entire range of human hearing. So not one subtle nuance is lost in professional applications. The PRO 1480i makes use of patented S-Logic® Plus technology, which creates an incomparably spatial effect thanks to decentrally positioned sound transducers. When combined with the open construction of the headphones, a broad sound stage is created that is perfect for precisely analysing audio signals. Another advantage of S-Logic® Plus technology is the higher perceived volume: significantly lower sound pressure achieves the same listening experience. This protects your hearing, especially when using frequently and for long periods. Thus long hours of fatigue-free listening are possible. The combination of S-Logic® Plus technology and the open construction works wonders: these headphones are light and easy fitting, and open ear cups allow air to the ears. This guarantees maximum comfort, no matter how long the session. Sound engineers and musicians have a wide range of requirements for professional audio equipment in general and professional headphones in particular: they not only have to sound good and fit comfortably; they also have to be robust to master the challenges of demanding days in the studio. That’s why our ULTRASONE PRO 1480i open reference headphones have an especially solid design – guaranteeing long years of analytically precise listening. The soft velour ear cushions can easily be replaced if signs of wear and tear begin to appear after years of use. The three-meter-long coiled cable is also detachable and can be changed when a shorter cable is needed, for example. These circumaural headphones are musical allrounders that are just as suitable for classical and jazz as for rock and pop. That’s why the ULTRASONE PRO 1480i is the perfect listening tool for anyone seeking professional studio headphones with open construction as a reference for mixing and mastering. Technology: S-Logic® Plus technolgy Principle: dynamic/open SPL: 94 dB Magnet: NdFeB Driver: Mylar Driver size: 40 mm Frequency range: 20 – 20.000 Hz Impedance: 32 Ohm Ear pads: speed-switch velour ear cushions (black) Cable 1: approx. 3 m detachable coiled cable with gold-plated 3.5 mm mini jack Weight (excl. cable): 295 g Adapter: 3.5 mm/6.3 mm gold-plated adapter, screwable Case: transport bag

Kompaktni mikser Premium kvaliteta sa 4 mikrofonska i 4 stereo linijska ulaza, kao i dva nezavisno kontrolisana stereo izlaza. Mikser je opremljen sa dva Xenyx mikrofonska predpojačala sa 48V fantomskim napajanjem ka o British Style 3-band ekvilajzerom za najfinije podešavanje signala. Jednostavan za upotrebu i veoma portabilan, idealno dizajniran za samostalan nastup ili manji band. Poseduje i RCA CD/Tape ulazne konektore i izlaz za slušalice sa nezavisnom kontrolom jačine signala. Tehnička specifikacija: * Premium ultra low-noise, high headroom analog mixer * 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps * Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound * Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects * USB/Audio Interface included to connect directly to your computer. Free audio recording and editing software downloadable at www.behringer.com * Channel inserts on each mono channel for flexible connection of outboard equipment * 2 aux sends per channel: 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send) * Peak LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels * 2 subgroups with separate outputs for added routing flexibility; 2 multi-functional stereo aux returns with flexible routing * Main mix outputs with ¼" jack and gold-plated XLR connectors, separate control room, headphones and stereo tape outputs * Control room/phones outputs with multi-input source matrix; Tape inputs assignable to main mix or control room/phones outputs * Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls * Internal autorange power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving * Rack mount brackets included for ultimate flexibility * High-quality components and exceptionally rugged construction ensure long life * Conceived and designed by BEHRINGER Germany

Megaphone Meets the 21st Century Use this extremely lightweight, yet powerful PA system to get your point across indoors – or on the playing field. The EUROPORT HPA40 portable PA system is designed for use in all situations where you need to raise the volume of your voice to communicate effectively with a crowd or small audience. The HPA40 is the ideal PA system for business meetings, sports coaching, tour guides, outdoor activities, classrooms – or any place where you could use a little extra volume for your voice. Ultra-compact, portable PA system ideal for business meetings, tour guides, classroom activities, and various other applications 5" full-range loudspeaker with enormous power and incredible sonic performance in a super-light package AC & battery operated with up to 8 hours continuous use per battery charge “Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included) Mic and Auxiliary inputs to connect to your mic, smart phone and other line level sources Comes with a BEHRINGER XM1800S microphone, 3' cable, charger and mic stand adapter Power switch, Volume control and battery charge indicator LEDs Convenient battery and shoulder strap compartment Ergonomically designed carrying handle and shoulder strap for effortless portability Designed and engineered in Germany

Specifications Cable Color: black Numbered XLR fan-out Cable Ø: 15 mm Available lengths 3 m (6.5 ft.) = Part No. X8X8Pro2 5 m (16.4 ft.) = Part No. X8X8Pro5 Applicable with the following RME products: OctaMic II Micstasy BOB-16 DMC-842

This inwall speaker is flatter and even more invisible than any of its predecessors. The frame has been reduced down to 1 millimetre, but still scores high when it comes to vibration absorption the frame thickness more than halved. The grille of the loudspeaker has been noticeably fine-tuned and it feels like silk to the touch. The sound is accurate, warm and carries far. A no-bones-about-it speaker. range <40m2 sound quality background system 2-way coaxial woofer 4” polypropylene carbon tweeter 0.5” polycarbonate amp power 10 - 100W (recommended) sensitivity 86dB impedance 8Ω frequence range 90Hz - 20kHz dimensions cut-out (Ø) 160mm dimensions (Ø x d) 180 x 70mm weight / piece 0,95kg housing ABS colour white extra paintable options KITRO1