Vocal microphone designed to sound clear and full bodied on small to mid-sized PA systems The F50 embodies a tight and uniformly controlled cardeoid polar pattern which assists in isolating the vocals from the instruments on stage. The F50 is also available with a noiseless, magnetic on/off switch (F50S). Its warm, natural sound reproduction, resistance to feedback and ability to handle high SPLs without distortion allows the F50 to be utilized in a variety of live and studio applications. The F50 is an entry level, all purpose vocal microphone for small to midsize PA systems.

The Fusion Series microphones represent affordable excellence. The f6 dynamic instrument microphone is designed for instruments requiring bass reproduction in live and studio applications. The f6's hypercardioid pick-up pattern helps to minimize feedback and isolate the instrument from ambient sounds on stage. The f6 instrument microphone has low impedance and balanced output providing interference-free performance. Applications - Live Stage , recording - Kick Drum - Kettle drum, floor tom - Bass Cabinets, Leslie bottom

Tehnička specifikacija Heavy duty 450mm gooseneck Supercardiod Dynamic capsule Momentary push to talk switch Desk mount flange Dodatne informacije The AM heavy G Microphone is a supercardioid dynamic heavy duty 450mm gooseneck microphone designed for supermarkets, fast food outlets and other demanding applications where a +óÔéČ+ôgrab and yell" paging microphone is required. Featuring a heavy duty gooseneck, capsule and a momentary switch on the microphone head, the AM GNhds is supplied unterminated with a desk mount flange

Tehnička specifikacija ELEMENT Neodymium Dynamic POLAR PATTERN Unidirectional FREQUENCY RESPONSE 60-14,000 Hz OPEN CIRCUIT SENSITIVITY -54 dB (1.9 mV) re 1V at 1 Pa IMPEDANCE 600 ohms SWITCH MagnaLock™ on/off WEIGHT 11.9 oz (337 g) DIMENSIONS 7.23" (183.6 mm) long, 1.63" (41.4 mm) head diameter OUTPUT CONNECTOR Integral 3-pin gold-plated XLRM-type ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T2 Dodatne informacije The industry standard for affordable instrument microphones, the MB 2k features a unidirectional dynamic element design for outstanding off-axis rejection and feedback control. Its frequency response is tailored for optimal instrument pickup. This rugged, all-metal mic is equipped Audio-Technica-s Hi-ENERGY® neodymium magnet structure for maximum output and fast transient response, with noise-reducing soft-touch finish, MagnaLock™ switch design for silent on/off operation, and a corrosion-resistant gold-plated XLRM-type connector.

Vocal microphone designed to sound clear and full bodied on small to mid-sized PA systems The F50 embodies a tight and uniformly controlled cardeoid polar pattern which assists in isolating the vocals from the instruments on stage. The F50 is also available with a noiseless, magnetic on/off switch (F50S). Its warm, natural sound reproduction, resistance to feedback and ability to handle high SPLs without distortion allows the F50 to be utilized in a variety of live and Studio applications. The F50 is an entry level, all purpose vocal microphone for small to midsize PA systems.

Dinamički Kardioidni mikrofon sa 5-pozicija bas roll-off prekidačem. Rugged professional microphone 5-position bass roll-off switch Effective feedback rejection Clear sound reproduction Easy handling due to pronounced directivity Includes microphone clamp for 3/8 in. thread Technical Info Pick-up pattern: cardeoid Frequency response: 30 - 17,000 Hz Sensitivity: (free field, no load) (1 kHz) 2 mV/Pa +/- 3 dB Nominal impedance: 200 ohms Min. terminating impedance: 200 ohms Dimensions in mm: 215 x 46 x 49 Weight: approx. 385 g U kompletu MZA421 adapter za stalak s zaključavanjem.

- R1 Ribbon is a microphone with a 1.8 micron aluminum membrane with an orientation of 8. - Because it contains a particularly high frequency response (around 7kHz) and increased sensitivity, - R1 produces more open and natural sound! - R1 is ideal for a large number of applications, including recording guitar speakers, wind instruments, string instruments, commercial broadcast and voice recording!

RNR1 Aktivni Ribon mikrofon je prvi iz serije mikrofona iz Rupert Neve Signature serije. SE Electronic i Rupert Neve ostali su zapisani u istoriji mikrofona RNR1 Neve Ribbon mikrofon svojim performansama i besprekornim dizajnom, jedan je od najboljih mikrofona koji SE Electronics ima u ponudi. On nudi sve ono što producenti i inžinjeri zvuka vole: tople i svilene niske, neverovatnu dubinu srednjih frekvenci i oštrinu i snagu visokih frekvenci koje najčešće nedostaju Stara cena: 2142 EUR AKCIJA-SNIŽENJE 1680 EUR

SPECIFIKACIJE: Capsule Type: Condenser Pressure Gradient w/ 34mm edge-terminated capsule Frequency Range: 20Hz/24Khz Polar Pattern: 9 - Switchable from omni- to bi-directional Sensitivity: 14 mv/pa Impedance: 50/200 ohms SPL: 144 dB Equivalent Noise: 12 dB (A) Tube Type: 6072A Power Requirements: Dedicated Power Supply, 115V or 230V AC Size: 52mm x 225 mm Weight: 620 g

Tehnička specifikacija Mic type: Small diaphragm condenser Polar Pattern: Cardioid, Hyper, Onmi Freq. Response: 20-20000Hz Phantom voltage required: 48 +\- 2V Full impedance, module: less than 300 ohms Weighted SPL (ref. DIN 45412): 18 dBA Maximum SPL in 250-8000Hz range, (less than 0.5% THD): 130 db Free field sensitivity at 1KHz: 10 mV/Pa Free field sensitivity roll off from 40Hz to 20KHz should not exceed +\- 3 db Weight: 70 gr Length, mm: 128 Max diameter/width, mm: 23 Accessories included: Mic holder The difference in free field sensitivity between 0± and 90± should be as follows: For cardioid capsule: in 250-8000 Hz range: no less than 4 db Average sensitivity difference between O± and 180± for cardioid capsule in 63-12500 Hz range. Dodatne informacije The Oktava MK-012 is a compact, high quality capacitor microphone with interchangeable capsules to provide a choice of cardioid, hypercardioid or omni-directional polar patterns. The wide, flat response ensures that all sounds are captured with a high degree of accuracy. A -10 dB pad is included for use in high SPL environments. The capsules, which screw onto the microphone body, utilise a precision, integral connection system to ensure reliable electrical contact. The Oktava MK-012 is suitable for use in any situation where an accurate sound is required, the size of the system makes it ideal for use in broadcast, sound for picture, installation, sound reinforcement and theatre situations as well as the recording studio.In pairs, the Oktava MK-012s are perfectly suited for coincident and spaced stereo miking techniques, and also overhead useage in live and studio situations.Audio Pro Artist d.o.o. – Profesionalna studijska, razglasna i rasvjetna oprema, te glazbeni instrumenti po najnižim cijenama. Posjetite nas na www.audiopro.hr

At first glance of the NTR you’re aware that it’s very special and unique – an intricate blend of art and science. Designed to hang in the world’s finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for RØDE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at RØDE’s headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available. Sonically, the NTR is capable of reproducing unprecedented high-frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element. The Ribbon One of the thinnest ribbons in existence Measuring only 1.8 microns, the NTR ribbon was designed to provide the highest level of sensitivity across the useable frequency response range. Laser etched element Most ribbon microphone manufacturers manually cut the element, resulting in microscopic frays along the edges that decay over time. RØDE uses a proprietary laser technique to cut the NTR ribbon, giving a far more precise cut with smooth edges, increasing its longevity. Internal shock mounting The NTR’s integrated shock mounting is so effective an external shock mount is not required. The Body Travel screw This secures the sensitive ribbon element and shock mount in place when not in use. Chemically etched all-metal mesh Extremely rigid while exhibiting super-low density, this results in greater acoustic transparency. Solid surfaces in the capsule rejection zone The solid frame around the ribbon capsule is positioned entirely within the rejection zone of the capsule’s bidirectional polar pattern. Unique design The ribbon is mounted distinctly separate to the microphone body, allowing the greatest possible acoustic transparency around the ribbon element and minimizing any resonance. The Electronics Custom transformer Married to RØDE’s ribbon element is a high output, ultra-low noise, low-impedance transformer. This ensures maximum fidelity between the NTR’s ribbon motor and electronics. World-class active electronics In combination with the transformer this allows the NTR to be used with a wide range of preamps without the additional gain requirements of many other ribbon offerings The Warranty 10 year warranty RØDE offers a free extended 10 year warranty on the NTR, following online registration of the microphone on www.rode.com Features Highly sensitive 1.8 micron ribbon element Bi-Directional Polar Pattern Internal Shock Mounting System Custom designed and manufactured transformer Heavy-duty matte black finish Ribbon-securing travel screw supplied Designed and manufactured in Australia One free ribbon replacement during warranty period Specifications Acoustic Principle: Velocity transducer Active Electronics: Step-up Transformer and signal balanced preamp stage Directional Pattern: Figure 8 Frequency Range: 20Hz ~20000 Hz Output Impedance: 200 Ohm Signal to noise Ratio: 79.3dBA Equivalent Noise: 15 dbA SPL (as per IEC651) Maximum SPL: 130dB SPL Maximum Output: 8dBu (@ 1KHz, 1% THD into 1K ‡ load) Sensitivity: -30.5 dB re 1V/Pa (30mV @ 94dB SPL) ± 2dB @ 1kHz Dynamic Range: 115dB SPL Power Requirements: P48 Output Connection: 3 Pin XLR - Balanced output between Pin 2 (+) Pin 3 (-) and Pin 1 (ground) Weight: 1047g

Studijski kondenzatorski cigaret mikrofon sa membranom malog promera. Karakteristika usmerenosti: kardioidna Frekvencijski opseg: 30Hz – 20kHz Osjetljivost: 10mV/Pa. Maksimalni nivo zvučnog pritiska: 130 dB (uz 0,5% ukupnih nelineranih izobličenja)

Nedirektni merni kondenzatorski mikrofon velike preciznosti. Da biste dobili najbolju zvučnu sliku u svakoj prostoriji morate prvo shvatiti akustiku prostora. ECM8000 je specijalizirani kondenzatorski mikrofon dizajniran za korištenje sa "real-time" analizatorima (npr. Behringer Ultracurve DEQ2496) s ciljem da si priuštite preciznu zvučnu sliku prostora. Nakon toga možete koristiti Vaš grafički ekvalizator za fino podešavanje rada vašeg razglasnog sistema s namjenom da se Vaš razglasni sistem savršeno slaže sa karakteristikama bilo kojeg akustičnog okruženja. Tehnička specifikacija: * Ultra-linear condenser microphone for measurement and recording application * Perfectly suited for room equalization application plus high-resolution studio recording and live applications * Exceptionally flat frequency response and ultra-high sound resolution * Evenly weighted, true omnidirectional pattern * Works with phantom power from +15 to +48 V * Perfect for use with the BEHRINGER ULTRACURVE or any other analyzer * Ultra-low noise transformerless FET input eliminates low-frequency distortion * Gold-plated 3-pin XLR connector for highest signal integrity * Swivel stand mount and transport case included * High-quality components and exceptionally rugged construction ensure long life * Conceived and designed by BEHRINGER Germany

Kondenzatorski cardoid instrumentalni mikrofon specijalno napravljen za ozvučavanje tomova i doboša. * Transducer type: Electret condenser * Polar pattern microphone: Cardioid * Microphone frequency response: 30 - 20.000 Hz * Dimensions: Clamp (W x H): 85 x 118 mm; Gooseneck length: 20 mm; Total length: 120 mm * Net weight without packaging: 138 g

Tehnička specifikacija Karakteristika usmjerenosti: kardioidna, Frekvencijski opseg: 20Hz - 20kHz, Osijetljivost: 20mV/Pa (na 1kHz), Maksimalni nivo zvučnog pritiska: 134 dB (uz 5% ukupnih nelineranih izobličenja). Dodatne informacije Isporučuje se sa blokom za napajanje, metalnim shock-mount amortizerom, aluminijumskim koferom i kablom. Pressure gradient transducer with the same large diaphragm capsule of the legendary U 47 and M 49 Directional characteristics: cardioid Frequency range: 20 - 20,000 kHz Max. sound pressure level: 114 dB for K < 0.5%, 134 dB for K < 5% Max. 8 dBu output voltage Nominal impedance: 50 Ohm Nominal load impedance: 1 kOhm Dimensions (diameter x length): 57 x 142 mm Weight: 460g

Beskompromisna kvalitet, za ozvučavanje bubnja, perkusija, akustičnih gitara, violina i ostalih akustičnih instrumenata - Mikrofon sa ugrađenim 80 Hz hi-pass filter . - Frekvencijska osjetljivost: 40-20,000 Hz

Novi mikrofon za ozvučenje bas bubnja iz Artist serije. Izuzetnih osobina. Sastoji se od dve kapsule (kardiodna kondenzatorska i hiperkardioidna dinamička). Prakticno - dva mikrofona u jednom. Odličan za bubnjeve, gitarska pojačala... Frekvencija: 40-20,000 Hz (kondenzatorski) 40-15,000 Hz (dinamički).

Vrhunski vokalni mikrofon kreiran za nastupe uživo. Kardioidni kondenzatorski. Frekvencija: 20 Hz-20 kHz ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 30-18,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa IMPEDANCE 150 ohms MAXIMUM INPUT SOUND LEVEL 147 dB SPL, 1 kHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal) NOISE 19 dB SPL DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical SWITCHES High-pass filter; 10 dB pad (nominal) WEIGHT 10.6 oz (300 g) DIMENSIONS 7.05" (179.0 mm) long, 1.97" (50.0 mm) head diameter, 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8470 Quiet-Flexâ„¢ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T4

Instrumentalni mikrofon idealan za gitarske kabinete, tomove, snare, timpane. Idealan za aplikacije s visokim SPL-om. ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY -43 dB (7.0 mV) re 1V at 1 Pa IMPEDANCE 100 ohms MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) NOISE 11 dB SPL DYNAMIC RANGE (typical) 137 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 83 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical SWITCHES High-pass filter; 10 dB pad (nominal) WEIGHT 6.0 oz (170 g) DIMENSIONS 4.55" (115.5 mm) long, 1.89" (48.0 mm) maximum diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE R6 # Excels in high-SPL applications # Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound # Low-profile side-address design with tapered grille allows optimal positioning of element vis-Ã -vis sound source # Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source # Robust design for enduring dependability on the road # Integral 80 Hz HPF switch and 10 dB pad

SPECIFIKACIJE: Capsule Type: Condenser Pressure Gradient w/ 34mm capsule Frequency Range: 20Hz/20Khz Polar Pattern: 9 - Switchable from omni- to bi-directional Sensitivity: 18 mv/pa Impedance: 200 ohms SPL: 148 dB with 10 dB pad engaged Equivalent Noise: 14 dB(A) Tube Type: EF95 (6AK5, 6J1, 5654) Power Requirements: Dedicated Power Supply, 115V or 230V AC Size: 56mm x 205 mm Weight: 600 g

The MK-519 features a large 27.5 mm condenser capsule with cardeoid pattern using an all-brass backplate construction, precision-drilled pattern control holes and optimal 5 micron gold-plated diaphragm. An isolation mount / diffuser is installed at the base of the capsule mount to reduce “boink” and tame sound reflections that smear detail. The microphone features a new no-feedback amplifier capable to work properly on 600 Ohm load. The MK-519 provides a very high sensitivity and extremely low self-noise level, provided by a high polarizing voltage (about 100 V). The single layer headbasket is used to reduce internal sound reflections between the grille and the capsule that smear midrange and high frequency detail - the result is a clear and natural mid and high frequency response. However, it entrusts additional requirements to the careful handling: it is highly recommended to use a pop filter to protect the capsule from dust spittle.

The JM37 is a very high quality true capacitor microphone with FET impedance converter and transformer output. The capacitor element is manufactured to the classic centre electrode design which provides smooth extended frequency response without low frequency boominess. Quality is further enhanced by using dynamic feedback actually at the capacitor element. This original technique eliminates distortions which can occur when using this type of microphone for high volume levels. The capacitor membrane is microfine mylar with gold sputtering, voltage polarized by phantom power. The microphone body is made of brass with double screening of the transformer. Connection is via screened balanced audio cable with 3 pin XLR connectors.

Tehnička specifikacija Karakteristika usmerenosti: kardioidna i omnidirekciona (sa selekcijom putem prekidača na mikrofonu) Frekvencijski opseg: 25Hz - 20kHz. Osetljivost: 16mV/Pa Maksimalni nivo zvučnog pritiska: 128 dB (uz 0,5% ukupnih nelineranih izobličenja)

Tehnička specifikacija Transducer type electrostatic Operating principle pressure gradient The diaphragms active diameter 25 mm (1") Frequency range 20 Hz to 20 kHz Polar pattern unidirectional, cardioid Output impedance 50 ohms Rated load impedance 1000 ohms Suggested load impedance > 500 ohms Sensitivity at 1000 Hz into 1000 ohms load 21 mV/Pa S/N Ratio CCIR 468-3 weighted 76 dB S/N Ratio DIN/IEC 651 A-weighted 87 db-A Equivalent noise level DIN/IEC A-weighted 7 dB-A Maximum SPL for 0.5% THD at 1000 ohm load 134 dB Dynamic range of the microphone preamplifier 127 db Phantom powering voltage on pins 2 & 3 of XLR +48 V (+/-4 V) Current consumption < 2 mA Output connector 3-pin XLR male, gold plated contacts Signal polarity positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3 Dimensions and weight 168 x 63 x 41 mm, 350 grams Dodatne informacije Opcionalni pribor: studio shockmount studio pop filters foam wind screens microphone cables